Jump to content
SAU Community

Recommended Posts

ok,

this is probably a really stupid question, but i was wondering the best way to rip a fat burnout in a manual.

Auto V8's are easy... doesnt take a brain surgeon to work that one out... but i want to be able to rip a fat burnout in a manual, without shifting off the original line.. any suggestions.

i have found a few different ways, but none are perfect and most the tail likes to step sideways a bit when im doing it...

dave ;)

Link to comment
https://www.sau.com.au/forums/topic/28109-burnouts-d/
Share on other sites

I'm going to assume that this question is in regards to burnouts when warming tyres at a legal drag meet.

1. Push clutch in

2. Select a gear (1st is simple but 2nd warms up better)

3. Build up the revs to a nice high rpm. I recommend 8,000.

4. Drop the clutch and quickly move foot from clutch to brake.

5. Heat till satisfied.

6. Serve hot.

;):D:D:D:D:D:D

It's difficult to stop the back from sliding out, but it's something you just need to live with ;)

Link to comment
https://www.sau.com.au/forums/topic/28109-burnouts-d/#findComment-585363
Share on other sites

lol... the colt.

OR... adding to leewah (which is by far the easiest and most effective)

You can use heel/toe.

Use your toe to build up revs... then put down the brake... then bring off the clutch.

It's just easier to do leewahs ;)

Link to comment
https://www.sau.com.au/forums/topic/28109-burnouts-d/#findComment-585448
Share on other sites

I know what leewah has - but the person asking the question doesnt have what leewah has - get it?

Telling someone to launch at 8000 revs when their car doesnt go that far [from factory] doesnt make sense...

anyway who cares - I have a STAR ;) !!!

Link to comment
https://www.sau.com.au/forums/topic/28109-burnouts-d/#findComment-585719
Share on other sites

oh also, when you do this at the drags, how much tire tread does it take off... cos i reckon i took about half the tread off these brand new (3000km) tires in 4 or 5 burnouts.

Thanks - just wanting to know so when i get back to melb i can push the liner into a high 13 for my first ever official drag.

Link to comment
https://www.sau.com.au/forums/topic/28109-burnouts-d/#findComment-585898
Share on other sites

Originally posted by NismoR34

I know what leewah has - but the person asking the question doesnt have what leewah has - get it?

Telling someone to launch at 8000 revs when their car doesnt go that far [from factory] doesnt make sense...

anyway who cares - I have a STAR :P !!!

my 33 hits 8000rpm (rev limit set at 8500 for some reason) but i dont think i will go that far.. in my pissy 205 tires i only need to dial up 4k..

now getting a v8 up to 8k and dropping , that could be fun.. thats about 3000rpm over the red line :P

Link to comment
https://www.sau.com.au/forums/topic/28109-burnouts-d/#findComment-585908
Share on other sites

ok im back in here - for a minute.

I still dont think its reasonable to advise people to launch at 8,000rpm - thats my point, always has been my point. And 8,000 rpm wont be necessary or possible on the average "forum user's" car!

As I said, mine will do burnouts easily launching from 3,000 - 5,000rpm so why bother with maxing your revs out just on launch? Its going to climb up to the max rpm very quickly in 1st or 2nd anyway...

Dave I think I can safely assume you are not in the category of having:

A: A GTR

B: An RB26

C: A Worked RB26

D: A Huge Aftermarket Turbo hanging off an RB26

E: A 700HP+ engine

Maybe I am wrong. This type of setup probably does need much higher revs than your average liner to invoke wheelspin, though I am sure its fun!

My main point is I think YOUR original question [the reason we are in this thread] wasnt answered effectively, thus I tried to help. I also think a lot of other forum goes will be looking in here and trying to learn from the Q&A's

/end rant

HKSgtst - hover your cursor over the star and some magic will happen :( Works differently depending on star colour ;)

Link to comment
https://www.sau.com.au/forums/topic/28109-burnouts-d/#findComment-586705
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • You're going to miss not worrying about rust in the strut towers like the Skyline shitboxes out there
    • A few little updates that weren't filmed due to not taking long to do or not interesting enough for their own video. My new K&N Air Filter arrived, I went with an RU-4180 which matched the dimensions of the universal cone filter the car originally had.  The battery had gone flat, while that was charging I tidied up the spaghetti wiring at the bulk head and down the sides of the engine Next job was to swap the stereo The Kenwood harness had the female ISO plugs cut off and the male ISO plugs cut off the adaptor loom and joined with bullet connectors. I ordered in a repair loom through work and re-did it all. New Kenwood unit installed (Android Auto, DAB, Bluetooth, Reverse Camera) The bonnet/hood gas struts have been poor since collecting the car. I couldn't find any suitable replacements locally so took a chance on a pair from AliExpress.  The originals don't use a retaining clip to secure the cup onto the ball fixture, would explain why I struggled for 10-15mins trying to pry off the cups. The ball fixtures unscrew using a 12mm spanner, new ones are the same size. Sadly no photo of them fitted, you're not missing much lol The dished Momo steering wheel got replaced with my Momo Tuner, turns out I ordered counter sunk bolts for the horn trim ring (like they normally are for the steering wheel) instead of allen cap (flat seat)  A terrible photo of a Quaife style gear shift knob I've had stashed in my tool box for many years after purchasing the incorrect thread size (I can see a pattern emerging with ordering incorrect parts...) Also threw in a cup holder and a (empty) Boss Coffee can, because why not  
    • GT-R clearly the better choice! The 300 is certainly not insaly fast but has a decent amount of poke. Does a nice little drift around the corners with a decent amount of throttle. It's VERY predictable in a slide too.  Feels so progressive! People probably presume there's a 25 year old driving it based on my behaviour this week! 🤣
    • Yeah Jap import. Fairlady Z then! I'm a bit the same.  They've been on my radar for a fair while but then just impulsively decided to buy one!  Was going to just buy an NA and add turbos to it later but decided to save the f'ing around and just buy the turbo version. 
    • Thanks mate, well done to you too! Yeah not looking forward to doing any major work to it!
×
×
  • Create New...