Jump to content
SAU Community

Recommended Posts

Hey all

Have cleaned out the shed and will not be using this stuff anymore so come get a bargain.

ITEM : YOKAHAMA 16 INCH TYRES

CONDITION : 90% TREAD LEFT

INFO : THESE ARE LIKE NEW , 215 / 50 / R16

PRICE : $150 ALL FOUR !!

LOCATION : ADELAIDE

ITEM : SERIES 1 GTST REAR WING

CONDITION : GREAT

INFO : ALL LED'S WORK AS WELL

PRICE : $120

LOCATION : ADELAIDE

ITEM : SERIES 1 GTST FRONT SEATS

CONDITION : GOOD

INFO : GOOD SEATS

PRICE : $100 PAIR

LOCATION : ADELAIDE

ITEM : SERIES 1 GTST REAR SEAT

CONDITION : GOOD

INFO : IS IN GOOD NICK

PRICE : $80

LOCATION : ADELAIDE

ITEM : SERIES 1 GTST BONNET

CONDITION : GOOD

INFO : WHITE, ONLY COUPLE ROCK CHIPS

PRICE : $150

LOCATION : ADELAIDE

ITEM : SERIES 1 GTST BOOT LID

CONDITION : GOOD

INFO : INCLUDES BOOT LOCK AND STRUTS, IS WHITE.

PRICE : $160

LOCATION : ADELAIDE

ITEM : ALLOY GT WING

CONDITION : GOOD

INFO : LIGHT BLUE, ALLOY GT WING

PRICE : $120

LOCATION : ADELAIDE

ITEM : R33 GTST UPPER INLET PLENUM

CONDITION : WORKED FINE

INFO : UPPER INLET ONLY INCLUDING THROTTLE BODY

PRICE $ 80

LOCATION : ADELAIDE

ITEM : R33 GTST STANDARD EXHAUST MANIFOLD

CONDITION : GOOD

INFO : WAS ON MY SERIES 2 RB25, INCLUDES HEAT SHEILD

PRICE : $70

LOCATION : ADELAIDE

ITEM : R33 GTST BRAKE CALIPERS AND DISCS

CONDITION : GOOD

INFO : WERE OFF MY OLD 33 GTST TRACK CAR, NO PADS CALIPERS AND DISCS ONLY!

PRICE : $350 FOR FRONT AND REAR

LOCATION : ADELAIDE

ITEM : SPARCO RACING SEAT

CONDITION : AVERAGE BUT GOOD FOR TRACK CAR

INFO : WAS USED IN MY TRACK CAR, HAS RAIL TO SUIT 33 GTST, HAS RIP IN CLOTH RIGHT SIDE SUPPORT

PRICE : $120

LOCATION : ADELAIDE

ITEM : 33 GTST JUN BL CAT BACK EXHAUST

CONDITION : GREAT

INFO : CAT BACK JUN BL MUFFLER, AWSOME SOUND

PRICE : $280

LOCATION : ADELAIDE

ITEM : 33 GTST PASSENGER SIDE HEADLIGHT

CONDITION : GOOD

INFO : WORKED ON MY OLD CAR, NEED A CLEAN

PRICE : $80

LOCATION : ADELAIDE

ITEM : R33 GTST SHELL - REGISTED !!!!

CONDITION : HAS FRONT DRIVER SIDE DAMAGE TO FRONT GUARD AND DOOR

INFO : IS A 1994 GTST, STILL HAS REGO WAS NOT A WRITE OFF ACCIDENT !! WILL COME WITH DOORS, FRONT WINDOW, CARPET, ROOF PLASTICS, DASH SURROUND AND REAR DIFF AND CRADLE , FEW OTHER PARTS, STEERING WHEEL AND STEERING SHAFT WAS CUT ALSO DUE TO IT BEING BENT IN THE ACCIDENT AND WAS UNABLE TO TURN THE WHEEL SO I CUT IT OFF!

PRICE : $1200 INCLUDING REGO AND BARE SHELL WITH PARTS MENTIONED ABOVE ONLY !

LOCATION : ADELAIDE

IF ANYONE WANTS EVERYTHING LISTED ABOVE ILL DO A REALY CHEAP DEAL !!

Will add pics tomorrow night or send me a txt and ill send pics to your mobile ASAP.

pm me or 0433549430 for pics

Im willing to post things but at your cost !

Cheers

Hey all

Have added the below parts to the list.

Pics are at the bottom as well.

ITEM : 33 GTST SERIES 1 SIDE INDICATORS

CONDITION : GOOD

INFO : THEY ARE ORANGE

PRICE $25 PAIR

LOCATION : ADELAIDE

ITEM : SERIES 1 GTST GLOVE BOX

CONDITION : GOOD

INFO : ITS A GLOVEBOX FROM A SERIES 1

PRICE : $50

LOCATION : ADELAIDE

ITEM : SERIES 1 STANDARD FRONT GRILL

CONDITION : GOOD

INFO : STANDARD FRONT GRILL

PRICE: $25

LOCATION : ADELAIDE

ITEM : SKYLINE LIGHT UP REAR GARNISH

CONDITION : GREAT

INFO : LIGHTS UP GREEN

PRICE : $40

LOCATION : ADELAIDE

ITEM : SERIES 2 GTST COIL PACKS

CONDITION : GREAT

INFO : WORKED FINE ON MY LAST SERIES 2 ENGINE

PRICE : $80 ALL SIX

LOCATION : ADELAIDE

ITEM : GTST COIL PACK PLASTIC INSERT COVER

CONDITION : GOOD

INFO : SITS BETWEEN THE CAMS OVER THE COIL PACKS.

PRICE : $20

LOCATION : ADELAIDE

ITEM : SERIES 2 GTST INJECTOR LOOM

CONDITION : GOOD

INFO : WORKED FINE

PRICE : $40

LOCATION : ADELAIDE

ITEM : SERIES 2 GTST STANDARD AIRBOX

CONDITION : GOOD

INFO : COMES WITH FILTER AND SNORKLE

PRICE : $80

LOCATION : ADELAIDE

ITEM : 33 GTST SIDE MIRRORS

CONDITION : GOOD

INFO : THESE ARE ELECTRIC GTST MIRRORS BUT HAVE THE PLUGS CUT OFF ( CAN BE RE WIRED )

PRICE : $120 PAIR

LOCATION : ADELAIDE

ITEM : 33 GTST FRONT DOOR TRIMS

CONDITION : GOOD

INFO : CAME OUT OF MY SERIES 1 GTST

PRICE : $100 PAIR

LOCATION : ADELAIDE

ITEM : 17x8 RIMS x3 ONLY

CONDITION : GOOD

INFO : SUIT 33 GTST, ONLY 3 AVALIBLE OTHER ONE IS WREAKED

PRICE : $120 ALL 3

LOCATION : ADELAIDE

ITEM : HKS EIDS

CONDITION : NEW

INFO : HKS EIDS CONTROLS THE IDLE SPEED OF THE CAR, THIS UNIT IS TO SUIT ANY RB MOTOR !

PRICE : $100 , BRAND NEW ! THESE COST $160 FROM HKS !

LOCATION : ADELAIDE

ITEM : TURBOSMART FUEL CUT DEFENDER

CONDITION : NEW

INFO : FUEL CUT DEFENDER

PRICE : $140 , THIS IS BRAND NEW AND STILL HAVE THE $200 PRICE TAG WHICH I PAID FOR IT ON IT !

LOCATION : ADELAIDE

ITEM : SERIES 1 GTST STANDARD FRONT AND REAR BAR

CONDITION : GOOD

INFO : WHITE IN COLOUR

PRICE : $100 BOTH

LOCATION : ADELAIDE

ITEM :

PICS ARE IN NEXT POST, MOST PARTS ANYWAY PLEASE PM ME FOR MORE INFO !

CHEERS

Sorry guys wont let me upload pics at the moment for some reason?

Send me a pm of what your after and ill MMS you pics of parts requested until i can load pics.

cheers

post-29615-1249896255_thumb.jpg

ITEM : SKYLINE LIGHT UP REAR GARNISH

CONDITION : GREAT

INFO : LIGHTS UP GREEN

PRICE : $40

LOCATION : ADELAIDE

we have spoken.

garnish is mine people :P

Passenger side headlight pic below

series 1 gtst grill sold pending payment

Light up rear garnish sold

Front gtst seats sold

PM's replied

post-29615-1249955034_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...