Jump to content
SAU Community

Recommended Posts

Hey guys i am currently wrecking an R33 S2 in silver. I have pretty much all the parts from the car, as can be seen from the photos there are many parts which were destroyed but if you see something you like let me know and i can get more pics and let you know a price.

- Bare Shell with good Compliance not on the Register as Written Off $1000

- Twin exhaust pipe complete $400

- Boot lid in Perfect nick painted silver with Genuine GTR Wing $450

- Drivers Side switch panel in good condition believe it or not $120

- Full Airbag setup including drivers, passenger, crash pad, clock spring, control module $1000

- Series 2 Boot Trim complete and in great condition $140

- Full Lock set including ignition, door locks, boot lock and key $150

- Front brake setup with calipers, pads (pretty sure EBC green stuff) rotors etc $350

- Engine Package including turbo, wiring, loom, ecu $2200

- Auto Gearbox $200

- Passenger side mspec skirt slight damage $75

- Turbo Auto diff (good ratio) $400

- Rear brake setup $250

- Tein HA height and dampner adjustable coilovers $750 for full set

If you see any other parts you think you may want let me know and i can arrange photos for you no probs, Alos have a few other cars im wrecking so let me know if there is anything specific you need as i might be able to get hold if it for you.

All prices are negotiable and parts are located in Campbellfield, Victoria

Cheers Luke

post-16406-1249904577_thumb.jpg

post-16406-1249904599_thumb.jpg

post-16406-1249904623_thumb.jpg

post-16406-1249904649_thumb.jpg

post-16406-1249904679_thumb.jpg

  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

intrested in selling the blade out of the wing?

I already have a gtr wing need a blade as i have a big F off carbon one and id like options.

ill take the grill, i cant pm cause i havent posted enough cause i just signed up. can i have your number, im in eltham would come get the grill now cheers,

G'day Mate

Look i am chasing the passenger side rear Stub axle.. Not including Brakes, Rotors, Any of the Suspension components. just the Stub axle itself

Can you Give me A Price including postage to Bray Park, Qld, 4500

Hey,

Still cant do PM's. Yeah i want Mainly The Hub with the studs and the part it presses on to (I believe the stub axle) where all the lower and upper control arms join to as well as the Hicas joins to. But that is it.. No Brakes, No Control Arms, No Dog Shaft. So at least you can still sell the Brakes..

Cheers Marco

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey guys Long time lurker, I daily a nm35 stagea 250t rs four and I've had it for almost 2 years (very reliable 👌). Issues or just looking for information ill always find myself here having a read, so thought id join.  3inch stainless intake, pod filter, AM performance turbo dump pipe, 3inch hotdog, 3 and half inch stainless to 3 and half inch AM performance blast pipes. Bc racing coilovers. 18inch rims Hdi intercooler and trans cooler soon.  Here's my car
    • thanks for the advice on the box... i was thinking the 6 speed was better for cruising on the highway but on closer inspection and comparison the Rb 5 speed box was not too different...  So the choice is going to be the RB25 box... if I can save up and find one at the right price  
    • Thanks Matt, yes that's what i am aiming for. Just going to apply the right voltage and grounds to the dash connector. Hence my search for these pins... any chance you know if these pins are in the same spot as the ones on the S15 Dash connector? as mentioned above on page 8?
    • Yes, unfortunately that's the one. Signal was noisy to begin with; after driving once and looking back at the logs I saw pressure constantly swinging between 0-200psi, or staying at 0 randomly for a few seconds. There's a lot of good sensors that share the same look and feel, so don't presume they're all bad. I bought mine for 20$ off Amazon and I should have read the reviews prior, as it's clear they're junk.  I purchased a lowdollerr motorsports sensor. 
    • wedding eh.....I seem to get to more funerals than weddings or christenings these days....
×
×
  • Create New...