Jump to content
SAU Community

Recommended Posts

Hi Guys

Some of you may have seen it in the Project Build Up Section, Selling it to fund the R32 N1 RH9 Build up. Here's a link for the pics: http://www.skylinesaustralia.com/forums/Nu...ea-t280567.html

Not looking to sell straight away as of HPI Photo Shoot in 2weeks but looking to sell after that has been done. This car owes me Appox $90 000 and was build with top shelf JDM Parts. Power is currently 350rwkw but tuning to get more. Car is setup for time-attack racing (just needs a cage).

Please feel free to ask me anything about it, my asking price is $50000.

Cheers

Benny

Link to comment
https://www.sau.com.au/forums/topic/282937-nur33-1995-r33-gtr-purple/
Share on other sites

Hi Guys

Some of you may have seen it in the Project Build Up Section, Selling it to fund the R32 N1 RH9 Build up. Here's a link for the pics: http://www.skylinesaustralia.com/forums/Nu...ea-t280567.html

Not looking to sell straight away as of HPI Photo Shoot in 2weeks but looking to sell after that has been done. This car owes me Appox $90 000 and was build with top shelf JDM Parts. Power is currently 350rwkw but tuning to get more. Car is setup for time-attack racing (just needs a cage).

Please feel free to ask me anything about it, my asking price is $50000.

Cheers

Benny

mint car mate, i wish i had that sort of cash, im just looking for something more standard around 25k,

good luck with the sale, its an absolute monster, love all youve done to it :)

cheers

Hi

Heres a spec list for ya's, majority of these parts are new and alot of research and devlopment has gone into this car, starts first go and have never had any problems with this car runs as sweet as a nut. Contact Me on Ph: 0423481630 or [email protected]

Engine Mods Block-R34 N1 NUR Engine, all N1 internals and fully balanced,N1 Water Pump,N1 Oil Pump,HKS 1.2mm Metal Gasket, Hi Octane Racing Sump Extension with Trap Doors (Hold 10L of Oil).

Head-Tomei 260/9.15mm Cams with Tomei Adjustable Cam Gears,Tomei Timing Belt, Spool Oil Head Drain Kit.

Cooling-Koyo Type Z 2 Row Alloy Radiaor,Garage Defend Carbon Cooling Panel,Sard Radiator Breather Tank,HKS Type R Intercooler Kit,N1 Oil Cooler with Greddy Oil Filter Re-locator.

Fuel-Sard 800cc Injectors, Sard RJ Fuel Regulator, Sard Fuel Rail,Sard Pressure Gauge,Nismo In-tank Fuel Pump, Bosch 700HP 044 Pump with 3L Surge Tank with custom -8 Intake & Return Lines to Rail.

Turbo & Exhaust-HKS 2530 Turbo's, HKS 1.3Bar Actuators,HKS Stainles Dump Pipes,HKS Front pipe,Tomei Expreme Stainless Mainfolds,Trust Power Extreme Titanium 90mm Exhaust.

Electronics-Apexi Power FC D jetro with hand controller,Apexi Turbo Timer,Greddy E-01 Boost Controller.

Gearbox-OS Giken R3C Triple Plate Clutch,Nismo Braided Clutch Line,Greddy Shift Nob.

Bolt Ons & Engine Dress- Tomei Oil Filler Cap,Top Secret Catch Can,Greddy Oversized Pulley Kit,Ross Engine Damper balancer,HKS Piping Kit,HKS Twin power amplifier,Samco heater hose,Samco intake pipe,Splitfire coilpacks, ARC Super Inducion Air Box,Apexi BOV's, Lots of custom braided lines and fabrication.

Handling Mods

Coilovers-Tein Mono Flex Damper Controls

Links-Cusco Tension Rods,Ikeya Formula Upper Rear Arms,Cusco Strut Brace, Ikeya Formula Rear Traction Rods, Cusco Drag Rods (Hicas Lock), Ikeya Formula Front Upper Arms, Moonface Racing Bump Adjust Tierod Ends, UAS Urethane Cradle Bushes, UAS Alloy Cradle Spacers, UAS Urethane Rear Diff Bushes, Cusco Front and Rear Sway Bars.

Brakes- (FRONT) AP Racing 6Pot calipers with 2 piece 355/32mm slotted rotors, Hawk carbon pads. (REAR) AP Racing 4Pot Calipers with 2 piece 330/24mm rotors, all brakes have Goodridge Braided Lines, Cusco Master Brake Stopper.

Style Mods

Carbon-Nismo Pillar Garnish,Nismo Spoiler Tips,Mines Mirrors,Abflug rear diffuser,Border Racing side ducts,Autoselect canards,Autoselect Chibi Devil Wing,Attain GT Bumper Gaurd, JJR Carbon N1 Holes

Body-Nismo Side Skirts,Nismo clear side indicators,Nismo bonnet lip,JJR LED Tail lights, URAS Type 1 Bonnet Vent, Super Now Tow Hook.

Wheels: (Track) Impul NS-GT Shadow Crome, 18x9.5 +15 Offset. (Street) Rays Gram Lights 57F Pros Noble Gold with Titanium Dish 18x10 +20 Offset

Audio Mods

Head Unit-Pioneer 6.5" DVD Flip-Out Style

Speakers-Alpine Type R 6.5" Components (Front) or Trust Titanium Exhuast at 8000rpm

Interior Mods

Gauges-Nismo 320km/h Cluster and Nismo centre console gauges (white faced), Greddy Boost.

Dash-Custom painted midnight purple

Hi Guys

Just a few more pics hopefully help sell it. This car is super reliable, brakes very well, corners even better and turns heads everywhere i go, truely unique ride with many rare & hard to find parts. Hope you enjoy.

post-56933-1250219559_thumb.jpg

post-56933-1250219620_thumb.jpg

post-56933-1250219717_thumb.jpg

post-56933-1250219803_thumb.jpg

post-56933-1250219891_thumb.jpg

post-56933-1250219955_thumb.jpg

post-56933-1250219987_thumb.jpg

post-56933-1250220027_thumb.jpg

post-56933-1250220081_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
    • The video for the servicing and fuel filter change can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44 One of the main jobs I wanted to do before the car officially went on the road, was to remove the awful looking blue silicone hoses. There's nothing wrong with having coloured silicone hoses, but I realise as I'm getting older I prefer monotone engine bays with a splash of colour on the engine cover(s). I cover this in a lot more detail in the Youtube video, so unfortunately there's limited photos of the process. The intercooler, upper radiator, boost vacuum and upper breather hoses were all changed to black silicone with mikalor clamps. The only blue left is a blanking cap at the back of the inlet manifold and the GReddy pulleys (which will be replaced for stock when the cambelt gets replaced) While the intercooler pipes were off I gave them a quick clean/polish too A before photo I do have a replacement air filter on its way. Fuse box covers were painted blue, they're now satin black Another job on the list while the bumper was off, is to add some mesh https://live.staticflickr.com/65535/54737966256_99b28bfa30_c.jpg[/img] I was hoping to use some thin wire to secure it, but it seems I've misplaced it and the wire I had was too thick to twist easily. I ended up using cable ties for the time being https://live.staticflickr.com/65535/54737131882_c2b7989dcc_c.jpg[/img] Was pleasant to see this https://live.staticflickr.com/65535/54737131627_8b2aab13b3_c.jpg[/img] The last thing to do was to fix the front grill and re-mesh that to match but I ran out of time The Youtube video can be seen here: https://www.youtube.com/watch?v=R4FsF6tgizE&t=23s
    • Hi all,I already introduced myself in the Victoria section, but only saw this section now lol XD New to forums and new to skylines. Hoping to buy my new skyline within October
×
×
  • Create New...