Jump to content
SAU Community

Recommended Posts

Hi, I recently got my blitz icolour EBC installed onto my GTR32.

The tuner set the boost manually on one of the channels.

However, I want to have a lower boost setting on another channel so I set the Channel to Auto mode. I set the boost amount under the Auto mode to 0.75bar. However, the car does not boost to 0.75bar when on this channel. It gets stuck at 0.5bar.

When I switched it back to the manual channel that the tuner did set at 69 gain (1bar), the car goes to 1bar with no issues. (Except for a big lag - reaches only 1bar at 5k rpm on stock turbos)

I need help to understand why in the Auto mode, my car does not reach the "set" boost level and gets stuck at 0.5bar, which i presume is the stock boost setting. Any insights on how to overcome this problem?

Also, how do I calibrate my speed in my Blitz icolour? My icolour's speed readings are not accurate at all when I do the "drive at 40km/h setting". Anyone knows what is the GTR32's pulse reading?

Thank you!

Link to comment
https://www.sau.com.au/forums/topic/283374-help-needed-for-blitz-icolour-ebc/
Share on other sites

i have the same controller - regarding the boost setting my tuner set this to manual mode as the auto mode is not as accurate (u will read this in the supplied user manual)

regarding the speed sensor - forget about that as i emailed blitz direct in japan & they claim that the speed sensor on the gtr is not compatible with the controller? i decided to leave the speed sensor as is

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...