Jump to content
SAU Community

Recommended Posts

ROH Drift R's

Painted matte black centres

17x8

Unsure of offset but they have a large (almost like 30mm spacer) of metal built into them and sit close to the guard of a R33. From a estimate (no guarantee this is what they are, total guess!) I would say they are around +15. I have only slightly rolled guards on my 33 and they fit under reasonably well.

They are not in show room condition hence "skid rims" and are little on the heavy side. I can throw on some used tyres if you want as well for skids for $20 extra. Would make good spare set of skid wheels for Winton.

They are in Country Victoria (won't change location when I edit it) but can be delivered at buyers cost or to Winton on the 5th September.

$200

*these links are not actual photos of them but gives you an idea of what they look like. Obviously they don't have as much dish or as sparkly/new as these pictures.

https://groupawheels...k-(3_4)SITE.jpg

http://www.groupawhe...R-BlackSITE.jpg

How they sit on my 33-

post-19787-1251345270_thumb.jpg

post-19787-1251345288_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/285304-cheap-skid-rims-17x8/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
×
×
  • Create New...