Jump to content
SAU Community

New Gt35r .063 + New Tial 44mm Wastegate

quick31
 Share

Recommended Posts

quick31 Contributor

quick31

Posted
Posted

Hi there fellas, as stated i have a brand new GT35r for sale and Tial wastegate. This is not your standard plain jane 35r it has a anti surge compressor housing as well as a Vband rear housing for easy removal and installation of the dump pipe no gaskets needed for a perfect seal. I have a brand new water and oil line kit as well that i will supply to the buyer free of charge which they sell on HP in a Box, all is required are the block fittings. The Tial 44mm wastegate comes with all fittings flanges ect as its new and never being used, I have also fitted a 17psi spring which cost another 100 dollars.

GT35R 0.63 ANTI SURGE VBAND+WATER AND OIL LINE KIT $1550 POSTED FIRM OR $1500 PICKUP

1251421312097946400.jpg

1251421380028414300.jpg

1251421430051013700.jpg

TIAL 44mm WATEGATE 17PSI SPRING $750

1251421557006965500.jpg

1251421604064550600.jpg

Buyer can contact me on 0421085473 or via PM cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      RB25DET with solid lifters - which cams ?

      By GTSBoy · Posted

      I think in the modern era we live in, if I were converting a hydro lifter head to solid, particularly when chasing revs, I'd be seeing what I could do to use shimless buckets. Those of us with Neos usually have this persistent niggling fear of a shim getting spat out and ruining everything. Shim-over is...yucky that way. At least the Tomei kit appears to be conventional, but it would still be nice if they'd decided to go shimless.
    • Kapr
      "Cheap" bolt on turbo on RB25DET NEO

      By Kapr · Posted

      Ok guys thank you very much. GCG highflow it is then 🙂 
    • JC71
      98 R34GTT 4k engine stumble

      By JC71 · Posted

      forgot to mention that when it does this it does not kill the engine, but I have not kept the pedal down long enough to let it, as I see no reason to beat up on it as its got to be something simple, small and dumb causing this.  And as soon as I let off pedal, the engine returns to its normal super smooth operation and rpms re-stabilize quickly, once below 4k. 
    • JC71
      98 R34GTT 4k engine stumble

      By JC71 · Posted

      neither stumble or cut really seem to be an appropriate term....hard to explain its like a rev limiter but at 4k, but it violently shakes engine and entire vehicle as the rpms will not rise over 4k, even with slow acceleration. as soon as it hits 4k, it sounds like entire spark is lost entirely. plugs were 1.1 which I used as such, but later put in new plugs gapped down to .8 changed back after issue arose when I replaced the coils, still does it with either plug gap...damn and it was all running so good.
    • TurboTapin
      Why am I hitting a power wall with my stroked RB25?

      By TurboTapin · Posted

      Oh how times have changed! I actually lean it out relative to my water/methanol injector duty cycle. The methanol adds a lot of fueling and you can then lean it out even more due to reduced knock. 
×
×
  • Create New...