Jump to content
SAU Community

Recommended Posts

32 GTR looks hotter than a 34 GTT any day of the week .

Id got a 32 GTR for an "overall handling experience" or whatever it is your touting.

Dont forget to budget in a bit of cash for fixing the things that break every couple months, it can and does happen.

+OVER 9000 votes

or as monga says

buy one thats been built/replaced all the expensive parts as they are costly to maintain an old example

though it would most likely cost you mid 20s for one thats built

  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

I'm a bit parted on this.

I reckon a 34 gtt might be better for you due to its age, but dont neglect a 32gtr. 34's are coming down in price and so are 32gtrs and you could even say they are around the same price(depending on quality).

You could even get a 33. they are common as, but due to the cheaper prices you could put your left over money into a few modifications.

32 Gtr is going to be my next car, but i enjoyed owning a 34 even though it was a 4 door, because it was a newer car (blah blah typical not a skyline experience with a 4 door).

Its up to you at the end of the day and theres plenty of helpful people that will be able to help you on this forum, just read around.

all very good advice thank you

i seem to have my short list on what to go for then :-

lucky find any GTR close to 20k as possible an pray i dont accidently get a lemon

33 GTT if i can find any for sale worth a look

finally the one that seems most viable the series 2 GTST's of which i have got 1 or 2 im looking at that look good cheap price

although i'll proberly still wish i had enough money to run a GTR just because who doesnt want bigger, better an meaner? :)

an bubba ... nice

Srsly dude, go drive a couple of R32 GTSt's, then think of what they would be like with an R33 GTSt engine or an R32 GTR engine.. I'm a big one for bang for buck (and I just don't like the way 33's feel.. except Pauls' :D)

Edited by bubba

There's pros and cons to going for a GTR or GTT really and it all kind of evens out. You said you want a head turner and a nice drive and in my opinion a R32GTR would probably be a better choice. I had a R33 GTST before I went away to Kal for 6 months and honestly the running costs on it is about the same as my R33GTR.

1 thing's for sure though is that I get more heads turning in my stock looking GTR than I ever did in my mildly modified GTST. It's true what everyone has been saying about the more you work the car the pricier the running costs.

Take some time out and test drive a few cars before making the big decision because nothing is worse than buying a GTT and regretting not buying a mint GTR instead. Potential wise, the GTR has more possibilities than a GTT although the age of the GTR might be an issue. I know with the amount I paid for my GTST and the money poured into it I really regretted not buying a GTR from the go, but that was many years ago when skylines were hardly ont he road and they were going for 25k for a GTST.

Well that's my opinions anyway.

Good luck dude.

In the interest of not being a lemon yourself, don't buy a 33 (you'll notice I tend to bash R33s around here...)

Consider importing a 32 GTR (cheaper in Japan but will work out to the same figure after importing and complaince) but you may have a bit more security with the condition of it.

R34s are newer and nicer, as has already been said, and probably in better shape, seing as R33 drivers cant afford a 34, they thrash the next cheapest option instead....haha

If you still have other cars as options on your board, you'll find a decent Supra for around 20k, or something newer like RX8s (if you're a girl...)

Wouldnt bother importing as your really just basing the condition of the car off the auction papers/your broker

Buying locally would cost the same these days as the dollar is down compared to the yen

You can get vehicle inspections, compression/leakdown test etc when you buy locally too

From my personal point of view, get a 32 GTR.

Sure it's getting old...but GTR will always be a GTR. Down the track, you can save up or even earn more.

If it's need repair and you can't drive it for a while, you can always take a bus.

I would happily drive a Kia if I have a 34 GTR. :D

Srsly dude, go drive a couple of R32 GTSt's, then think of what they would be like with an R33 GTSt engine or an R32 GTR engine.. I'm a big one for bang for buck (and I just don't like the way 33's feel.. except Pauls' :thanks:)

Hardly bang for buck there dude, once you have purchased a reasonable condition R32 GTST for $10,000-$12,000 you will require a decent RB26DETT which will cost you minimum 5 or 6k. Once that's done doing it cheap will require the RB25 box which is another $1,500 then install and other small parts required you will be tipping $20,000. Now your still miles behind the cheaper R32 GTR's but handing over the same cash.

Picking up a good R32 GTST with the RB25 already installed could be a great value, but there is better newer things available for the dudes $20,000 that he wants to burn.

on the other hand with a rb25 it only cost 1.5k manual r33 box 1.5k + labour

will work out alot cheaper then what mongas suggested

but by then you might as well buy a R33 GTST

ends up being cheaper, newer and less of an eye sore :yes: *flame suit on*

Let the R32 vs R33 debate go again.....

$8-9k for a 32gtst, $10-12k for something with suspension, exhaust, fmic etc.

$3k? for a halfcut.. that's your 25 and box right there.

Personally (and this is just my opinion), 32's look good, are light, fun and easily upgradable (specifically with parts of later skylines; brakes, gearbox, engine etc).

Even a 32gtst with a 25 turbo on there will make ~250rwhp and be more than fun enough to begin with and all the parts won't have "GTR" tax associated with them.

Depends what the guy wants and how mechanically knowledgeable he is, my 32 has had a few things go downhill on it. i.e. clutch/coilpacks/found some rust

I fixed these issues cheap due to people i know and what i can do myself, wouldn't of been the issue if it was someone else who doesnt know anyone/cant do anything themself.

Down under auto in Wangara has the most mint32 I've ever seen in my life for sale atm, factory weather shields and shit, mats are mint same with paint and that. If your looking at a 32 I'd go buy that one.

He has a Gt-R or two down there as well.

Whilst in Wangara, Distinctive Car imports has a few 34's and 33 GT-R's that are close to your price range.

In reality its hard to know what you like, but as a rule of thumb, the less you know the newer you should buy, also dont get anything with a 26 in it if you dont have deep enough pockets to fix it should the worst happen.

Clutches and coilpacks are almost consumables (clutches definitely are) and things that you should be banking on replacing anyway.

What it really boils down to (as Greg alluded to) is how much you can do yourself.. I do pretty much everything except machining, tuning and bodywork. If I had to pay for labour then I probably wouldn't be doing anything like I am as what I have spent on parts I'd have to spend again to get someone to fit them.

But, that is the world of modifications. You have your chequebook racers (ala Paul :yes:) and you have the people that do it themselves because they are passionate about it and like the experience/learning involved (and it saves a shitload of coin).

If you don't have the know-how or access to facilities/tools, then you better have really deep pockets if you want to embark on modifying cars.

I shall go back to the 32gtst though, they respond really well to basic mods. Hell, I paid $11k for my 32 a few years ago, it came with coilovers, split dump, catback exhaust, fmic. I spent $50 on a frontpipe and decat pipe, $500 on some 33gtst brakes and $500 on some whiteline swaybars and $300 on a 25 turbo (and later $400 on a clutch). Made for a fun little 250rwhp'd toy, took all the abuse I dealt at it and was my daily driver for a couple of years (even after the 30 conversion).

Unfortunately, as is the go with these sorts of cars, the power bug bit and it's been a neverending downhill slide for my wallet since :)

I would say buy the newer 34 GTT as it is more a sports car then a GTR - now i have everyones attention :P yes a sports car is rear drive and has been that way since cars were around i think of the GTR as a super-car the likes of Lambo, Audi and that P word :( so..

Sports = GTT

Super = GTR

my 20 cents.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
    • OK, now we are ready to get started. You need to remove the air boxes on each side for clearance. The cover is straightforward, undo the clips on the top and lift the front cover out of the rest of the housing. If it is tight you can remove the air filters first. The rear section of the airbox is trickier. On each side you need to remove the Air flow meter wiring which is held to the airbox with a clip; you need to get behind the clip on 2 sides if you want to remove it without breaking it - unclip the harder side and pull on the clip with medium force, then unclip the easier side and it should pop out The airbox is held onto the intake hose with a spring clamp; you need to get a flat bladed screwdriver behind the spring on both sides and pop them outwards. When you have got them in the right unclipped place they will stay there and the airbox slips out pretty freely. Put a rag in the intake to prevent anything getting dropped in there, and also to prevent you seeing that the turbo seal is leaking oil (as they do). Then. The top of the radiator is held by a steel plate, it is secured by 2x10mm and 2x12mm headed bolts . Remove them and remove the plate Also grab the bushings that hold the radiator to the plate on each side so they are not lost!
    • Next, remove the upper and lower radiator hoses, both are held with a spring clamp. While you are under there, tackle the Auto Trans cooler lines.  Again both are held on with spring clamps, and as mentioned above you should cap them on the radiator side with an 8mm cap, and on the car side loop them with a length of 8mm pipe - this will stop you losing a dangerous amount of AT fluid during the rest of the job If you've been meaning to add a sender for AT trans temp, this is a great time to do it; put a sender fitting into the passenger side line as that is the inlet to the cooler/radiator.
    • Next you need to remove the intake duct (as with pretty much every job on these cars), it is a series of clips you gently remove with a flat bladed screwdriver. They do get brittle with time and can break, and I have not found a decent quality aftermarket one that fits (they are all too soft or flimsy and don't last either) but the nissan ones are a couple of bucks each (ouch).  Once the clips are off (either 8 or 10, I didn't check) you lift the intake duct out and will see the reservoirs Undo the line into the radiator side cap (some bent needle nosed piers are awesome for spring clamps) and then remove the 4x 10m nuts that hold both in place.  I didn't get these pics, but remove the line under the radiator reservoir (spring clamp again) then remove that reservoir. Then you can get at the intake reservoir, same thing, spring clamp underneath then remove it. BTW This is a great time to put in a larger (+70%) combined reservoir that AMS makes..... https://www.amsperformance.com/product/q50-q60-red-alpha-coolant-expansion-tank/ They also make an Infiniti branded and part# version if that is your thing
×
×
  • Create New...