Jump to content
SAU Community

Rb25de Performance Parts

OoskylineoO

By OoskylineoO,
in Engines & Forced Induction

 Share

Recommended Posts

OoskylineoO Experienced

OoskylineoO

Posted
Posted

Hey guys, just thought it would be a bit easier to attract some of you N/A enthusiasts to help clear out my shed :(

R33 GTS4 Series 2 VCT N/A Motor rb25de 147kw, 114,000kms motor is in A1 condition, regularly serviced synthetic oils. Only pulled out for conversion. $700ono includes 4WD Sump and Front Diff, wiring loom and ecu and iridium plugs.

REASON: Took off some parts as I needed them. These include, water pump, tensioner and idle bearings, harmonic balancer, A/C and pwr/steer pump.

Can throw in a gates timing belt used 10,000kms only for $20 if purchased with motor.

R33 GTS4 Series 2 4WD Gearbox will fit stageas as well as any other running 4wd gear including GTRs. 114,000kms in good working condition, however 4th started to slightly crunch after I had oil changed too thin, needs thicker oil and will be ok.

$600ono

N/A polished Induction/Intake pipe, in excellent condition gives a nice low end induction growl. Came off R33 rb25de $150ono

Coby Extractors D12, excellent for N/A skyline, in great condition 2.5'' flange $310ono

HKS Super Drager Cat back system designed speciafically for the N/A RB25DE, in excellent condition check it out on link below.

http://www.skylinesaustralia.com/forums/R3...up-t275336.html

R33 GTR Front 5 Stud Hub Assembly good for 5stud conversions $180ono

Stagea, R32, R33 GTS4 Front swaybar $20ono

Autogauge Smoke Series Vacuum Gauge BRAND NEW $30ono

Stainless steel Cannon Muffler Angle Cut Tip - 2.5'' Inlet, 5.5'' Barrel, 4.5'' Angle cut Tip

Very good condition no dents, came off R33 $45ono

PM if interested thanks guys!

Link to comment
https://www.sau.com.au/forums/topic/289075-rb25de-performance-parts/
Share on other sites
OoskylineoO Experienced

OoskylineoO

Posted
  • Author
Posted (edited)

PARTS LIST UPDATE AND PRICE DROPS

R33 GTS4 Series 2 VCT N/A Motor rb25de 147kw, 114,000kms motor is in A1 condition, regularly serviced synthetic oils. Only pulled out for conversion. $650ono includes 4WD Sump and Front Diff, wiring loom and ecu and iridium plugs.

Took off some parts as I needed them. These include, water pump, tensioner and idle bearings, harmonic balancer, A/C and pwr/steer pump.

Can throw in a gates timing belt used 10,000kms only for $20 if purchased with motor.

R33 GTS4 Series 2 4WD Gearbox will fit stageas as well as any other running 4wd gear including GTRs. 114,000kms in good working condition, however 4th started to slightly crunch after I had oil changed too thin, needs thicker oil and will be ok.

$600ono

Coby Extractors D12, excellent for N/A skyline, in great condition 2.5'' flange $310ono

HKS Super Drager Cat back system designed speciafically for the N/A RB25DE, in excellent condition check it out on link below.

http://www.skylinesaustralia.com/forums/R3...up-t275336.html

R33 GTR Front 5 Stud Hub Assembly good for 5stud conversions $180ono

Stagea, R32, R33 GTS4 Front swaybar $20ono

Stainless steel Cannon Muffler Angle Cut Tip - 2.5'' Inlet, 5.5'' Barrel, 4.5'' Angle cut Tip

Very good condition no dents, came off R33 $45ono

Whiteline Rear Upper Control Arm bushes BRAND NEW. Fits r32, r33, r34, silvias, stageas, cefiro. $85ono

Gates Timing belt used 10,000kms only - $50ono

PM if interested thanks guys!

Edited by OoskylineoO
  • 2 weeks later...
OoskylineoO Experienced

OoskylineoO

Posted
  • Author
Posted

PARTS LIST UPDATE AND PRICE DROPS

R33 GTS4 Series 2 VCT N/A Motor rb25de 147kw, 114,000kms motor is in A1 condition, regularly serviced synthetic oils. Only pulled out for conversion. $600ono take it now or it goes to my friend. Includes 4WD Sump and Front Diff, wiring loom and ecu and iridium plugs.

Took off some parts as I needed them. These include, water pump, tensioner and idle bearings, harmonic balancer, A/C and pwr/steer pump.

Can throw in a gates timing belt used 10,000kms only for $20 if purchased with motor.

R33 GTS4 Series 2 4WD Gearbox will fit stageas as well as any other running 4wd gear including GTRs. 114,000kms in good working condition, however 4th started to slightly crunch after I had oil changed too thin, needs thicker oil and will be ok.

$500ono

HKS Super Drager Cat back system designed speciafically for the N/A RB25DE, in excellent condition check it out on link below.

http://www.skylinesaustralia.com/forums/R3...up-t275336.html

R33 GTR Front 5 Stud Hub Assembly good for 5stud conversions $150ono

Stagea, R32, R33 GTS4 Front swaybar $20ono

Stainless steel Cannon Muffler Angle Cut Tip - 2.5'' Inlet, 5.5'' Barrel, 4.5'' Angle cut Tip

Very good condition no dents, came off R33 $40ono

Whiteline Rear Upper Control Arm bushes BRAND NEW. Fits r32, r33, r34, silvias, stageas, cefiro. $70ono

Gates Timing belt used 10,000kms only - $45ono fits rb25de(t), rb20 i think

PM if interested thanks guys!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • dbm7
      R34 Skyline climate control unit transistor

      By dbm7 · Posted

      Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      First time we have seen lights 
    • Wazmond
      WGNC34 - floor mats

      By Wazmond · Posted

      I think Fitmit had some, have a look on there (theyre Australian as well)
    • soviet_merlin
      Howdy Y'all

      By soviet_merlin · Posted

      Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...