Jump to content
SAU Community

Recommended Posts

Hey guys, just thought it would be a bit easier to attract some of you N/A enthusiasts to help clear out my shed :(

R33 GTS4 Series 2 VCT N/A Motor rb25de 147kw, 114,000kms motor is in A1 condition, regularly serviced synthetic oils. Only pulled out for conversion. $700ono includes 4WD Sump and Front Diff, wiring loom and ecu and iridium plugs.

REASON: Took off some parts as I needed them. These include, water pump, tensioner and idle bearings, harmonic balancer, A/C and pwr/steer pump.

Can throw in a gates timing belt used 10,000kms only for $20 if purchased with motor.

R33 GTS4 Series 2 4WD Gearbox will fit stageas as well as any other running 4wd gear including GTRs. 114,000kms in good working condition, however 4th started to slightly crunch after I had oil changed too thin, needs thicker oil and will be ok.

$600ono

N/A polished Induction/Intake pipe, in excellent condition gives a nice low end induction growl. Came off R33 rb25de $150ono

Coby Extractors D12, excellent for N/A skyline, in great condition 2.5'' flange $310ono

HKS Super Drager Cat back system designed speciafically for the N/A RB25DE, in excellent condition check it out on link below.

http://www.skylinesaustralia.com/forums/R3...up-t275336.html

R33 GTR Front 5 Stud Hub Assembly good for 5stud conversions $180ono

Stagea, R32, R33 GTS4 Front swaybar $20ono

Autogauge Smoke Series Vacuum Gauge BRAND NEW $30ono

Stainless steel Cannon Muffler Angle Cut Tip - 2.5'' Inlet, 5.5'' Barrel, 4.5'' Angle cut Tip

Very good condition no dents, came off R33 $45ono

PM if interested thanks guys!

Link to comment
https://www.sau.com.au/forums/topic/289075-rb25de-performance-parts/
Share on other sites

PARTS LIST UPDATE AND PRICE DROPS

R33 GTS4 Series 2 VCT N/A Motor rb25de 147kw, 114,000kms motor is in A1 condition, regularly serviced synthetic oils. Only pulled out for conversion. $650ono includes 4WD Sump and Front Diff, wiring loom and ecu and iridium plugs.

Took off some parts as I needed them. These include, water pump, tensioner and idle bearings, harmonic balancer, A/C and pwr/steer pump.

Can throw in a gates timing belt used 10,000kms only for $20 if purchased with motor.

R33 GTS4 Series 2 4WD Gearbox will fit stageas as well as any other running 4wd gear including GTRs. 114,000kms in good working condition, however 4th started to slightly crunch after I had oil changed too thin, needs thicker oil and will be ok.

$600ono

Coby Extractors D12, excellent for N/A skyline, in great condition 2.5'' flange $310ono

HKS Super Drager Cat back system designed speciafically for the N/A RB25DE, in excellent condition check it out on link below.

http://www.skylinesaustralia.com/forums/R3...up-t275336.html

R33 GTR Front 5 Stud Hub Assembly good for 5stud conversions $180ono

Stagea, R32, R33 GTS4 Front swaybar $20ono

Stainless steel Cannon Muffler Angle Cut Tip - 2.5'' Inlet, 5.5'' Barrel, 4.5'' Angle cut Tip

Very good condition no dents, came off R33 $45ono

Whiteline Rear Upper Control Arm bushes BRAND NEW. Fits r32, r33, r34, silvias, stageas, cefiro. $85ono

Gates Timing belt used 10,000kms only - $50ono

PM if interested thanks guys!

Edited by OoskylineoO
  • 2 weeks later...

PARTS LIST UPDATE AND PRICE DROPS

R33 GTS4 Series 2 VCT N/A Motor rb25de 147kw, 114,000kms motor is in A1 condition, regularly serviced synthetic oils. Only pulled out for conversion. $600ono take it now or it goes to my friend. Includes 4WD Sump and Front Diff, wiring loom and ecu and iridium plugs.

Took off some parts as I needed them. These include, water pump, tensioner and idle bearings, harmonic balancer, A/C and pwr/steer pump.

Can throw in a gates timing belt used 10,000kms only for $20 if purchased with motor.

R33 GTS4 Series 2 4WD Gearbox will fit stageas as well as any other running 4wd gear including GTRs. 114,000kms in good working condition, however 4th started to slightly crunch after I had oil changed too thin, needs thicker oil and will be ok.

$500ono

HKS Super Drager Cat back system designed speciafically for the N/A RB25DE, in excellent condition check it out on link below.

http://www.skylinesaustralia.com/forums/R3...up-t275336.html

R33 GTR Front 5 Stud Hub Assembly good for 5stud conversions $150ono

Stagea, R32, R33 GTS4 Front swaybar $20ono

Stainless steel Cannon Muffler Angle Cut Tip - 2.5'' Inlet, 5.5'' Barrel, 4.5'' Angle cut Tip

Very good condition no dents, came off R33 $40ono

Whiteline Rear Upper Control Arm bushes BRAND NEW. Fits r32, r33, r34, silvias, stageas, cefiro. $70ono

Gates Timing belt used 10,000kms only - $45ono fits rb25de(t), rb20 i think

PM if interested thanks guys!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...