Jump to content
SAU Community

Attain Hicas Bar, R33 N1 Vents, Mint R33 Gtr Interior, R34 Gt-t Slotted Rotors + Green Stuff Pads, Ohlins, Gfb Stealth Fx

nigelswazi
 Share

Recommended Posts

nigelswazi Mentor

nigelswazi

Posted
Posted (edited)

Sorry the old thread was getting difficult to understand so I have combined them and included pics of bits that didn't have pics before

Location - Adelaide can post/courier at buyers expense

Contact - PM or SMS 0404998591

Brand New Genuine Nissan Plastic GTR N1 Vent, only one the other went missing, cost $380 from Nissan. These have special clips and a sticky seal making installation a simple process of just cutting out a slot, peeling off the backing to the sealant and clipping in place Price - $150

n1vent.th.jpgn1ventpartnumberbox.th.jpg

GFB Stealth FX BOV kit complete with the optional whistle trumpet adaptor, the normal trumpet adaptor, the standard plumbback adaptor and a 20mm hose plumback adaptor. Currently has the universal adaptor fitted also have a S15 adaptor kit I can supply with it for free as shown on the left in the picture. Comes complete with original purchase receipt for $500 and receipts for the extra fittings and trumpets. For those wishing to use this in the standard position you simply need to purchase the adaptor from GFB and it fits in the bottom Price - $300

gfbstealthfxfittings.th.jpg

Brand New in box Attain HICAS Lockbar high quality solid Japanese HICAS Lockbar perfectly safe unlike the many cheaper unsafe/flexing china spec ones. Price - $170 Delivered

attainhicasall.th.jpg

attainhicasstickerinstr.th.jpg

attainhicasbox.th.jpg

R33 Series 2 Front Bar in black complete with the rare Nismo Lower Lip. Price - $375

r33frontbarwithnismolipf.th.jpgr33frontbarwithnismolipb.th.jpgr33frontbarwithnismolip.th.jpg

R33 Series 2 Front Bar in maroon complete with the rare Nismo Lower Lip + N1 Vents. I haven't seen another Series 2 bar that has had N1 Vents fitted before but I think it compliments the Nismo lip giving a tuff look. The bar comes with all the bits to properly reattach the lip and N1 vents, in the plastic bag in the picture, and will need painting afterwards. The bar has been sanded down ready for painting hence the colour around the vents etc. Price - $275

maroonr33frontbarwithn1.th.jpg

Full R33 GTR Interior in excellent condition including front and rear seats + front and rear door trims/cards. Price - $1400

All in mint condition will remove this weekend and upload pictures

Front R34 GT-T Slotted Rotors used very low kms but in excellent condition and freshly machined.Price - $200

r34frontslottedrotors.th.jpg

Brand New (Just trial fitted) Front Greenstuff Brake Pads to suit R33 GTS-T R34 GT-T R32GTR WRX etc - $120

ebcgreenstuff.th.jpg

OR BUY BOTH FRONT ROTORS + GREEN STUFF PADS FOR $300

Apexi Pen Turbo Timer as new complete in box bought from Autobarn and as such has english manuals aswell as jap. Price - $90 Delivered

apexipenkit.th.jpgapexipenkitcloseup.th.jpg

R33 GTS-T Ohlins Rear Damper Adjustable Shocks and Springs. These shocks feature massive inverse monotube inserts. Price - $400 Pair

ohlinsrearleft.th.jpgohlinsrearright.th.jpg

Brand New Bodyform 400R Rear Bar and Side Skirts these people make the best fitting and highest quality kits hand made in Australia. Cost $950 + postage with receipt of purchase. Price - $800

As new R34 Stock Catalytic Converter used for a few hundred kms perfect for clearing defect or returning car to stock. Price - $60

r34cat.th.jpg

R33 Stock Catalytic Converter should fit S13 R32 R33 and Cefiro and they all have the same length cat and flange angles. Price - $40

r33cat.th.jpg

------------------------------------------------------------------------------------------

Location - Adelaide can post/courier at buyers expense

Contact - PM or SMS 0404998591

Edited by nigelswazi
nigelswazi Mentor

nigelswazi

Posted
  • Author
Posted (edited)

The following is now sold pending payment

R33 Series 2 Front Bar in black complete with the rare Nismo Lower Lip. Price - $375

r33frontbarwithnismolipf.th.jpgr33frontbarwithnismolipb.th.jpgr33frontbarwithnismolip.th.jpg

Edited by nigelswazi
nigelswazi Mentor

nigelswazi

Posted
  • Author
Posted (edited)

Had a few PM's about the Bodyform bodykit parts these are to suit an R33 GTS-T

Brand New Bodyform 400R Rear Bar and Side Skirts these people make the best fitting and highest quality kits hand made in Australia. Cost $950 + postage with receipt of purchase. Price - $800

Feel free to make reasonable offers on the parts left for sale

Edited by nigelswazi
  • 2 weeks later...
disco_potatoe Rising Star

disco_potatoe

Posted
Posted

would u be able to sell the nismo front lip by its self???

i'm looking for a nismo lip in any colour..... does anyone know someone how has one for sale?

thanks!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      Chris' Toyota Mark ii JZX110

      By Dose Pipe Sutututu · Posted

      How dare you sell your unreliable Skyline and buy a reliable, Toyota/Yamaha car with a strong gearbox, torsen LSD and Toyota reliability. At least you won't need to worry about oil pumps, big catch can, oil restrictors, blowing off power steering belts, sheering off 3rd gear, failing ABS relays/pumps, etc.
    • Duncan
      R32 Gtst - Track Car

      By Duncan · Posted

      Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • Dose Pipe Sutututu
      R32 Gtst - Track Car

      By Dose Pipe Sutututu · Posted

      https://www.facebook.com/share/p/18rmVb1SKB/ 
    • GTSBoy
      Leak from Tokico BM50 Brake Master Cylinder

      By GTSBoy · Posted

      The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • No Crust Racing
      R32 Gtst - Track Car

      By No Crust Racing · Posted

      Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
×
×
  • Create New...