Jump to content
SAU Community

Recommended Posts

Hey all, got a heap of parts surplus to my build. All parts are located in Westmead NSW. Can arrange shipping if needed at buyers cost.

If you have a R33 GTR half cage im happy to swap with cash either way depending on what parts your after.

GTR stuff used

R34 GTR steering rack. complete with tie rod ends $450

R34 GTR AFMs pair $200

R34 GTR engine wiring loom $350 (sub loom not included)

R34 GTR floor mats set of 5 $300 (drivers side heal padding has lifted a bit)

R34 GTR rear seats $200 perfect condition

R33 GTR bare OEM head, bonus oem valves, guides, springs included. No cams, no cam gears, no covers, no cam caps, $850 ono

R33 GTR cam, valley, and front covers $450 set

R33 GTR bare sump (no diff, no baffles) $150

R33 GTR Intake Plenum $150

R33 GTR Injector plate $200

R33 GTR Throttle Bodies and linkages $300

R33 radiator support $50

NEW Stuff:

Haltech Platinum sports 2000 with wire in harness, map sensor, air temp sensor, $2200 delivered

NEW R32/33/34 GTR upper radiator bushes set of 2 bushes $25 delivered

NEW OEM Top Injector o-ring set of 6 $50 delivered

NEW OEM Upper Injector Insulator set of 6 $50 delivered

NEW OEM Lower Injector Insulator set of 6 $50 delivered

Yokohama A-Drives set of 4, 265/35/R18 $1200 new

Commodore related...

VX SS standard 17" wheels and 60% thread left on tyres $450

Prices are pretty firm, low baller offers will be ignored.

PM me if your genuinely interested. or call me on 0401 466 244 and leave me a message.

If you have a R33 GTR half cage im happy to swap with cash either way depending on what parts your after.

Cheers,

Johno

Hey all, got a heap of parts surplus to my build. All parts are located in Westmead NSW. Can arrange shipping if needed at buyers cost.

If you have a R33 GTR half cage im happy to swap with cash either way depending on what parts your after.

GTR stuff used

R34 GTR steering rack. complete with tie rod ends $450

R34 GTR AFMs pair $200

R34 GTR engine wiring loom $350 (sub loom not included)

R34 GTR floor mats set of 5 $300 (drivers side heal padding has lifted a bit)

R34 GTR rear seats $200 perfect condition

R33 GTR bare OEM head, bonus oem valves, guides, springs included. No cams, no cam gears, no covers, no cam caps, $850 ono

R33 GTR cam, valley, and front covers $450 set

R33 GTR bare sump (no diff, no baffles) $150

R33 GTR Intake Plenum $150

R33 GTR Injector plate $200

R33 GTR Throttle Bodies and linkages $300

R33 radiator support $50

NEW Stuff:

Haltech Platinum sports 2000 with wire in harness, map sensor, air temp sensor, $2200 delivered

NEW R32/33/34 GTR upper radiator bushes set of 2 bushes $25 delivered

NEW OEM Top Injector o-ring set of 6 $50 delivered

NEW OEM Upper Injector Insulator set of 6 $50 delivered

NEW OEM Lower Injector Insulator set of 6 $50 delivered

Yokohama A-Drives set of 4, 265/35/R18 $1200 new

Commodore related...

VX SS standard 17" wheels and 60% thread left on tyres $450

Prices are pretty firm, low baller offers will be ignored.

PM me if your genuinely interested. or call me on 0401 466 244 and leave me a message.

If you have a R33 GTR half cage im happy to swap with cash either way depending on what parts your after.

Cheers,

Johno

hi, 200 u wanna sell the carpet mat?

hi, 200 u wanna sell the carpet mat?

Sorry mate, Im also still waiting for a price to ship to Singapore. DHL take thier time.

how much for R34 GTR rear seats sent to melbourne 3020? cheers

Last time I checked the freight was quite expensive due to the size (Toll). I'll measure them up again and get a quote from transdirect. They seem to be the cheapest couriers around..

Cheers

Johno

Edit, rear seat pics.. circle marks are from the camera lens.. will get better ones over the weekend.

Floor Mats - $124.00 to send to Singapore mate, if your keen let me know.

Rear Seats - $89.00 delivery via transdirect will take 2-4 days to arrive.. I didnt get a chance to get some better pics I'll try and get some during the week.

Cheers,

Johno

Floor Mats - $124.00 to send to Singapore mate, if your keen let me know.

Rear Seats - $89.00 delivery via transdirect will take 2-4 days to arrive.. I didnt get a chance to get some better pics I'll try and get some during the week.

Cheers,

Johno

ok. im interested. can we discuss through email? tks

Cool, thanks for letting me know mate and thanks for the feedback too.

To answer a few common Q's..

- R33 GTR parts are off a V-spec with 67,000kms. (doubt genuine kms but thats what the odo read)

- R34 GTR Parts are off a V-spec I with 80,000kms.

- Reason for sale, they are surplus to my needs as I had a complete long motor ready to go. and.... I need the cash to finish off the car.

- Everything is in good condition. I wouldnt sell it if it wasnt.

Cheers,

Johno

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
    • PROBLEM WAS BROKEN COOLANT SENSOR!!! Replaced with a new one and its running mint.
×
×
  • Create New...