Jump to content
SAU Community

Recommended Posts

got a HKS twin plate in my 32.

doesnt have much power, 278rwhp 13psi (stock turbo)

seemed to be fine on the dyno on thursday,

yet started slipping chronically (in the later stages of the day) on saturday (drift comp) ... it struggled to get back into the pit bay :S

tried the car yesterday, seemed to be a tad better (only slipping to 3000 rpm ish). but it still slipping.

what could of caused it to slip?

i didnt really ride the clutch, didnt really clutch kick much, but i did hold the accelerator flat down when i spun :P

so, whats easier/cheaper ...

1) hks rebuild kit

2) new plates

3) upgrade to a different clutch ... been told i can get a OS Giken Triple Plate for $1800

Rebuilding can be cheaper, NPC performance clutches rebuilt my Nismo clutch for me, you can give them a call if you want, I posted it up there.

Be warned that many mechanics won't like your car been around the workshop for a week if they can't move it...

found genuine NEW HKS twin plate, friction plates for $378 delivered. i just need to work out if my current friction plates are PRO or MAX .. or can i use either??

ill be dropping the box this week, do all the work myself, so i wont need to worry about emo mechanics :thumbsup:

found genuine NEW HKS twin plate, friction plates for $378 delivered. i just need to work out if my current friction plates are PRO or MAX .. or can i use either??

Also interested as I have a HKS twinplate that needs rebuilt but not sure what it is exactly.. couldn't figure out if it's pro or max..

Tocchi, where are those new friction plates from?

for one the gd pro's only came in triples..... the gd max came in twins. honestly not worth rebuilding with just plates due to the factory of the flywheel is gonna have hotspots all over it from slipping the ceramitalic plates. a proper hks rebuild kit will come with a whole new caged assembly with the plate inside and a loose plate for the flywheel side. been there done that 6000kms lata its slips once again. i do have alot more power then u tho near on 550 atw. if u want a good clutch rebuild without being a cheapskate as most ppl are either go to jim berry and get his custom setup carbotic plated twin plate guaranteed u wont slip that. and or direct clutch heard sum good things from them also

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...