Jump to content
SAU Community

Stock Bits Off An S2 R33 + Hks Pod, Boost Tee.


ToMMaH
 Share

Recommended Posts

All stock items have come off a series2 r33. They are all in good working condition and are for sale only due to major upgrades to the car.

Items are pick up only located in Jamboree Heights, Brisbane. I am open to offers but don't waste my time as I am in no rush to sell any of the items.

Standard coilpacks $150

Standard injectors $150

ECU from a manual s2 r33 $125

Standard AFM - pink lable $100

HKS Podfilter $90

Turbosmart boost tee $10

I will also soon have up for sale the standard turbo with exhaust manifold and dump pipe, the workshop it was at accidently forgot to leave the manifold in my car when I got it back. So watch this space...

Contact Tom, 0412 695 225. Preferably via SMS as during the better part of the day I cannot answer my phone.

Link to comment
Share on other sites

  • 3 weeks later...
  • 2 weeks later...
I will also soon have up for sale the standard turbo with exhaust manifold and dump pipe, the workshop it was at accidently forgot to leave the manifold in my car when I got it back.

so how much will the turbo cost when u get it back? only after the rb25 turbo to upgrade my rb20 one

thanks!

Link to comment
Share on other sites

  • 3 weeks later...
  • 2 months later...
 Share



  • Similar Content

  • Latest Posts

    • Took a little trip  went to nismo hoping the get my fuel tank hoses and unfortunately they told me they didn’t have stock luckily I was able to go to a Nissan parts store and they were able to order them in for me  then can home and cleaned the tank with some degreaser and fitted the new hoses before putting it back in the car 
    • 100% I’ll hack into the 33. Strap a turbo onto the RB25DE and/or put the 25 head on a 30 block. 33 passed in cos the reserve was too high. I’ll try lowballing it again and negotiate. Aim is to have it landed and on the road for under 15k, then spend the same amount on top in mods.
    • It's generally best practise to run 1x run without VCT enabled, then 1x run enabled till redline. Overlay the two torque graphs and you'll find the desired RPM to turn off VCT. Sometimes, it might be even worthwhile turning off VCT earlier control torque/cylinder pressure and using VCT purely to spool the turbo.
    • They sell them in Malaysia for about $4
    • First time I ever have issues with Amazon, but my wife often tells me to keep an eye out for fakes. It finally got me. I wrapped up the conversation with Gates. The gentlemen I was talking to seemed to hate his job but the response time on their technical support is outstanding. He stated that the hose is marked with some variation of "SAE J30R10" but that if you only purchase a 1 foot length like I did, it is possible to get a cut between markings and have a blank hose. To no ones surprise, he stated the swelling and "gummyness" isn't normal and to replace/buy from somewhere else (He mentioned NAPA). I'll toss a small end of the new one in gas for a few days before pulling the hanger out again, just to be safe.  Hose should arrive Monday. For those running multiple pump in tank hangers, you know the joys of getting them out and back in. I'm surprised I haven't destroyed my level float yet.  Lastly once I wrap all of this up, I'm planning on hitting the dyno again in 2 weeks while I'm on vacation. I realized recently that my VCT is set to turn off at 5000RPM. I'm surprised it wasn't increased while I was on the dyno last. I'm expecting I can increase it to ~6500RPM, if not more. Should hopefully get another 15-20kw out of it. I also want him to revisit my knock thresholds. I'm occasionally getting false knock around 3000rpm. 
×
×
  • Create New...