Jump to content
SAU Community

Recommended Posts

hey everyone,

cleaned up one room in the house today with all my car bits in it and found the following gear i no longer need. Had a search around SAU trying to find prices, and i've priced according to the search, But im fair so you can always make an offer.

1. R32 GTR style bar to it GTS-T

This is one of the front bars JSAI sell they rrp on his site for $385 plus post. However i bought mine before his price hike cost around $300 posted, and never used it. Got another style instead. Save yourself some cash and the pain of dealing with JSAI and grab mine for less :)

PA170003.jpg

The front bar is as delivered, on delivery there was a small crack on the front.

PA170004.jpg

Needs the usual prep work before painting, or just whack it on as its black gelcoat.

Price - $250. or make an offer.

2. Rear Coupe Seats for R32 gtst

These are in very good condition, no cig burns or jizz stains. I myself was surprised how good condition they were in.

PA170002.jpg

Price - $80 or make an offer.

3. FMIC Core only. This is a Bar/Plate core painted with radiator black paint for stealth reasons. It is brand new never used. Size = 600x300x76 w. 3" In/Outlets

PA170005.jpg

PA170007.jpg

Price - $150 or make me an offer.

Edited by 32_Dave
Link to comment
https://www.sau.com.au/forums/topic/292310-small-clean-up-sale/
Share on other sites

  • 2 weeks later...
  • 1 month later...


  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...