Jump to content
SAU Community

Recommended Posts

Up for grabs is a nicely modded 1997 Nissan RS-Four V Stagea. I am the first owner of this car in Australia and has been a pleasure to own but needs to go to make way for a new car!

Car has always been serviced every 5,000kms with a fully synthetic oil, run on 98 octane, and has only been boosted to 11psi which it made a safe 129.4awkw (can provide dyno sheet) with a slipping auto and been told it has heaps more in it but needs a copgy back ecu to get it to close to 200awkw on the standard turbo.

Since then car has had nearly 3k spent on the transmission which was rebuilt with Kevlar bands, heavy duty clutches, valve body modified for more solid shifts and stall flushed which was done by GZM Automotive. Also replaced the rear tyre's less than 6 months ago, replaced the alternator and installed 6" Apline Type S splits.

Spec's are:

RB25DET

94,000kms

All Wheel Drive

Reg to mid next year (June 2010)

FMIC

Spitfire Coil Packs

Turbotech Boost Controoler

Apexi Air Intake

HKS Boot Guage

3" Exhuast from the turbo back

Rebuilt Auto

18" Blitz Type 03 Wheels

Blitz Engine & Trans Coolers with Braided Lines

7" Double Din DVD Player with MP3/USB/Bluetooth

Freeway Dolphin/Nismo bodykit

Alpine Type S 6" Speakers

Twin Sunroofs

Nismo Clear Indicators

Con's:

Font bumper has a few crack's but can be easily replaced from between $400-$600 if your really picky from various body kit specialists (can provide quotes)

09062008053.jpg

09062008055.jpg

IMG_0033.jpg

PIC_1275.jpg

PIC_1279.jpg

PIC_1280.jpg

PIC_1281.jpg

Please contact me on 0412 876 885 with any inquires

Edited by SHIZNT
Link to comment
https://www.sau.com.au/forums/topic/292343-fsvic-nissan-stagea-rs-four-v-11000/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...