Jump to content
SAU Community

Recommended Posts

IT IS WITH SAD REGRET THAT I MUST SELL MY R34 GTR

99 V SPEC BLACK,THE USUAL FACTORY POWER OPTIONS LIKE. PWR WINDOWS,MIRRORS,AIR STEER,DUAL AIRBAGS,NISMO DASH,MB QUART 6.5 INCH SPLITS FRONT AND REAR,FOSGATE 900W AMP

NISMO AU24 BLOCK,FORGED PISTONS,PREPT RODS,NISMO BEARINGS,NISMO OIL PUMP,FULLY SERVICED AND PORTED HEAD,TOMEI HEAD GASKET,700CC SARD INJ,HKS CAM GEARS,HKS SS DUMPS

CUSTOM HAND MADE FULL EXHAUST,LARGE SUMP,TOMEI BAFFLE,LARGE OIL COOLER,TRUST VSPL INTERCOOLER,NISMO ENGINE MOUNTS,BILSTEIN PSS9 COILOVERS,IKEYA FORMULA FRONT ARMS,

ALL FRONT AND REAR BUSHES HAVE BEEN REPLACED,HKS GTSS TURBOS,HKS EVC 6 LMTD EDITION,ALCON FRONT AND REAR BRAKES,6POT MONOBLOCK 365MM FRONT AND 335MM REAR,

19X10.5 GRAMS LITES 57PRO WITH 275X30X19 BRIDGESTONE RE01R TYRES,PROJECT MU HC PADS, MAKES 350KWATWS ON CROYDON DYNO @26PSI , AND MAKES 374KWATWS ON 28 PSI

WHOLE CAR IS BUILT WITH THE BEST PARTS MONEY CAN BUY,TASTEFULL MODS DONE BY MATURE 43YR OLD OWNER. FAR TOO MANY MORE MODS AND PARTS ON CAR BUT CAN'T REMEMBER ALL

EXCEDY TRIPLE PLATE CLUCH ALSO IN CAR. NO TIME WASTERS OR INFO HUNTERS PLEASE FIRST TO SEE WILL BUY $65000 OR $60,000 LESS WHEELS OR $55,000 LESS WHEELS AND STEREO.

SOMEONE SMART IS GOING TO OWN A VERY QUIK AND RELIABLE R34 THE SEXIEST OF ALL GTR'S (JUST BEING BIASED) THANKS FOR LOOKING ,IF INTERESTED PLEASE RING ME AS I DO NOT GO ON COMPUTER OFTEN

CAR IS IN SYDNEY REG0-EAT430 RING BILL ON 0412351418 ANY TIME. CAR IS ALSO ADVERTISED ON POWERPLAY SITE AS THEY HAVE DONE ALL THE WORK ON THE CAR

immaculate BNR34 for so cheap...I can't believe your asking price.

looks like everything performance-wise that could be done, has been done (and properly at that.)

goodluck with the sale, i'd have loved to buy this

also found on Powerplay Imports site: http://www.powerplayimports.com/includes/c...php?make=Nissan

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...