Jump to content
SAU Community

Very Tidy R33 Gts-t

Msutton
 Share

Recommended Posts

Msutton Contributor

Msutton

Posted
Posted

Price:$ 11,000 Negotiable

Model:Nissan Skyline R33 GTS-T Series 1

Year:1995

Rego#:BDK98K

Engine:2498.0ltr

Body:Coupe

Colour:White

Transmission:Manual

Odometer: 52,000

Drive:Rear wheel drive

Fuel type:Petrol

I Recently Purchased this vehicle off a family friend. I Bought the car knowing he had spent the majority of his life if the mechanical trade and this car was his pride and joy. This is a very regretful sale but i have recently been accepted into the army and no longer need a vehicle. He had someone import the car for him and owned the car since it was imported and yes the kms are genuine, the car is not a front or half cut like a lot getting around these days. The Car is in immaculate condition inside and out, never been smoked in and always garaged. The car hasn't been touched or fiddled with, the only modifications is a front mount into-cooler, a top of the line exhaust system and duel stage boost controller, Turbo Timer as well as defi gauges, and no the gauges are not screwed onto the dash and the dash is not marked in anyway. The car also has had a new spray job as it was sprayed when the front bar and side skirts were fitted. there is a small chip in the front bar and other then that, the car is in a1 condition and you will go far to find a straighter r33. The car will also have 12 months Rego as of 08-11-09 if purchased before then i can knock the cost of rego off the price Features: A/c, Power steering ,Climate control, All power options, Central locking, Tinted Windows.

Car is located in Wollongong NSW

For more information or to inspect the car please contact me on 0431625206

post-66494-1256628274_thumb.jpg post-66494-1256628415_thumb.jpgpost-66494-1256628515_thumb.jpg post-66494-1256628703_thumb.jpg

post-66494-1256628790_thumb.jpg post-66494-1256628876_thumb.jpg

post-66494-1256628978_thumb.jpg

p_card.gifp_pm.gif p_report.gifp_up.gif

p_mq_add.gif

Link to comment
https://www.sau.com.au/forums/topic/293783-very-tidy-r33-gts-t/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Ben_D
      Wanted to buy R200 longnose LSD 3.9 ratio

      By Ben_D · Posted

      Hi all,  I am in the market for an R200 longnose diff out of a Z31 300ZX, or S12 RSX, DR30 skyline, or similar, in a 3.9 ratio.  Preferably a late model one with the M12 crownwheel bolts.  The only easy to find advert for one of these was my ad back in 2007 when I sold it on this forum.  I sold the diff as I had sold the car it goes to, but as it turns out, after 18 years I got the car back late last year, so now I'm looking for the diff !  If anyone knows where to find a longnose R200 LSD with the M12 crownwheel bolts, drop me a line at [email protected] - Bonus paid if soomeone comes up with the original diff (stranger things have happened !).  Cheers   Ben D    
    • Ben_D
      Back for more after 18 years - and where are the longnose R200 LSDs?

      By Ben_D · Posted

      Hi everyone, I used to post here a bit from 2004-2013, when I owned various Nissans, in particular my S12 RSX gazelle, which was sold in 2007.  As luck would have it, after an 18 year hiatus, the car found its way back to me last year, and over the past 11 months I have had the pleasure of restoring it with my kids.  One thing that I am after in particular is a 3.9 ratio R200 LSD for it.  I actually sold the one out of the car here back in 2007 , and it would be incredible if I could track down who I sold it to, so I can see how they have progressed over the years (and to be honest, to see whether I can get the diff back !).  Anyways, hi all and let me know "where are the R200 Longnose diffs all at these days ?  Cheers Ben D  
    • sonicii
      G35 Control arm and Compression Rods into a V35 Skyline.

      By sonicii · Posted

      Arms will be the same as the G35 or 350Z, but as above, there was a change in the lower control arm where it connects to the ball joint.  That said, you can remove the ball joint cone from your old ball joints and fit them to the new ball joints.  To be honest, I didn't think the ball joints themselves were different. The main ball joint is a bit awkward to replace, you really need to remove the steering knuckle to press out the old one.  Some people have used tools to remove it in place, but it just seemed too hard to get to. If you are going to press out/in that ball joint, then you may as well just replace the bushings in the LCA and the compression rod.  You can buy the compression rod bushing from Nissan, but the LCA bushes, you will need to go aftermarket. Much cheaper than buying the whole arm.
    • Erelyes
      Ceramic turbine damage to engine - what did yours do?

      By Erelyes · Posted

      Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Dose Pipe Sutututu
      M35 Aftermarket Fuel Pump

      By Dose Pipe Sutututu · Posted

      Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
×
×
  • Create New...