Jump to content
SAU Community

Recommended Posts

Item: 1994 Nissan S14/200sx with evil eye conversion, 207000km on the chassis, 25000km on forged motor, 5 speed manual, rego until March 2010

Location: Penrith

Specs as follows:

Engine/Electronics:

Fully forged SR20 bottom end (has 25000km on it since install - CP pistons with 86.5 bore, Eagle rods, ARP headstuds, ARP mainstuds, crankshaft machined and balanced)

HKS metal head gasket 1.2mm

Trust rocker arm stopper

brand new oil pump

brand new water pump

brand new timing chain and tensioner

diff and gearbox fluids changed 10000km ago

high flowed T28 turbo (tuned at 19psi)

HKS SSQ BOV

550cc injectors

Apexi AVC-r electronic boost controller

Apexi power fc j-detro with hand controller and air flow meter removed

direct intake pipe from K&N pod filter to the turbo

Coolingpro aluminium radiator

Hi Octane radiator air guide

Apexi 1.3kpa radiator cap

heavy duty racing grade blue radiator hoses

Hybrid front mount intercooler

Hybrid vacuum distributor

blue racing grade vacuum hosing (with spare length)

Apexi aluminium induction box for pod filter

Walbro 500hp fuel pump

mandrel bend 3 inch exhaust system from the turbo back with sports cat converter and 4 inch X-Force cannon (with silencer aswell if required)

Tien Super Street suspension

adjustable caster bushes

full adjustable camber kit

all front bushes replaced with new urethane bushes

Cusco front and rear strut braces

(have dyno sheet for 215.9rwkw)

Interior:

Sparco X-Fast gear knob

Sparco steering wheel

leather “Silvia” embossed gear boot

2 x Monxa SP12 reclinable sports seats

“Silvia” embossed vinal rear seat cover (black and light blue)

colour coded dash (same colour as exterior - centre console lid, ignition barrel surround, dash cluster surround, gearbox lid, stereo surround, air conditioner surround)

Exterior:

Genuine Uras S14 Type S full kit (front bar, rear bar side skirts) - imported myself from Japan

Uras 25mm wide vented front guards

full respray in Opal (blue base layer with purple and green pearl)

Lenso D1r 5 spoke rims - black painted centre with polished lip (275/17/40 rear and 245/17/40 front – 98% Sumitomo rubber)

5Zigen lock nuts made of aircraft alloy

S15 “lightening bolt” badge on bonnet

personalized number plates (black with metallic silver writing)

smoked tail lights with garnish, smoked front bar blinker, smoked front corner blinker (have original tail lights and garnish aswell if required)

shaved ariel hole and spoiler holes

30% tinted windows

Stereo:

JVC KW-AVX810 double din dvd player (dvd-r, dvd+r, cd-r, mp3, avi, divx, usb input, SD memory card reader, optional input for reversing camera, has bluetooth with module for most motorola phones)

pair of alpine 6½ inch 3 way splits with cross overs (front doors)

pair of alpine 6½ inch 2 ways (rear parcel shelf)

pair of Clarion 10 inch subwoofers

Clarion V-Net 450 amp

have receipts for almost everything since I purchased the car in 2007

Reason for Selling: is a regrettable sale however going overseas soon for a few years so instead of having it sit there may aswell let someone else enjoy it

Contact Details: You can PM me here, email me at [email protected] or text/call me on 0403289934

Price: $15000 - no swaps

Recent Pictures:

post-14943-1256742806_thumb.jpg

post-14943-1256742924_thumb.jpg

post-14943-1256743029_thumb.jpg

post-14943-1256743170_thumb.jpg

Have more pics if required...

final price drop as car must go by friday at the latest...new price $12800 ono... must go by friday as im flying out of the country on sunday...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
×
×
  • Create New...