Jump to content
SAU Community

Recommended Posts

Nissan Cefiro

= $10,000 WITH the above parts and below mods

= $9,500 WITH the above parts, stock turbo not fitted and below mods

= $8,500 WITHOUT the above parts and with below mods

I have created 3 pricing levels for people to choose how they want the car. I will drop $500 off the price if someone wants

to take it without me having to fit the stock turbo and manifold because I am short on time.

The car has rego until Feb and still has an extensive list of mods. Would make a perfect streeter.

Here are the details, please contact me for more information on the car:

EXTERIOR:

CA31 Chassis - July 1989 Build

Manual conversion

M-Sports 30mm Flared & Vented Front Fenders - Genuine

Rear Guards Flared by 20mm

Full Respray in factory Diamond Black

Factory Sunroof

Late Model Tail Lights

Kaixon 6000k HID Headlight Kit

Legal Tint with Front Banner

ENGINE:

RB20DET

Stock turbo

Xtreme Chrome Moly 5.5kg Flywheel

Xtreme 9 Puck 25% Over Standard Clutch

SplitFire Coil Pack Kit

R32 GTR Coilpack Loom

No exhaust currently fitted.

East Bear GTR Cooler Kit & Piping

Custom Stainless Intake Cross Pipe (By C-red Tuning)

R33 GTR VSpec Intercooler (painted black)

Trust 10 Row Oil Cooler w/ Braided Lines & Spin on Adaptor (painted black)

Bosch O40 Fuel Pump with Source Power direct from Battery

New rocker cover gasket (2000ks old)

Nissan Steel Exhaust Header Gasket w/ new Nissan Studs and Brass Nuts

Quality Blue Silicon Used on all joins and bends

Silicon Vacuum Hoses

Silicon Radiator Hoses

Razor Grounding Kit

Oil Catch Can

Retuned Standard ECU - Socketed ROM (in Japan)

DRIVETRAIN:

2-Way Mechanical Diff (Nice and quiet)

Gearbox Had 6 Bearings Replaced (Synchros are crunchy which 'may' be caused by slave cylinders not opening fully)

R32 Half Shafts installed

HPI Braided Clutch Line

Brand New Speedo Cable

UNDERNEATH:

Tein HA Coilovers (Purchased brand new in 04, 35,000km old now with no leaks or clunks)

Tein Castor Rods

Castor Rod Mount Brace

Cusco Front Strut Brace

Adjustable Traction Rods in Rear

Adjustable Upper Arms in Rear

HICAS Lock Back

Drift Pineapples on Rear Cradle

Work Emotion Kai 17 x 9 +17 all round

Brand new Falken 452 on the front and brand new tires on rear (215's all round)

Full 5 Stud Conversion, R32 Rear & Custom Billet Front Hubs

New rotors and pads all round (2000 ks old)

20mm 5 Stud Bolt on Hub Centric Spacers on Front

Z32 4 Pot Brakes & R32 2 Pot Rears in Red (replaced Rear Brake Lines)

S14 Steering Rack & Custom Power Steering Lines

INTERIOR:

Sexual dash mat (extremely rare!)

HKS EVC3 Boost Controller

Greddy Boost Guage

Nardi Turino Steering Wheel

Standard drivers seat

Stock S13 (Passenger)

Razo Gearknob

Pioneer MP3 Head Unit

Pioneer 6" Splits

PICS:

IMG_0096.JPG

IMG_0098.JPG

IMG_0099.JPG

garage.JPG

Parts and car are located in Diamond Creek (NE Melb suburbs).

Contact me on 0412 033 449.

Thanks.

Edited by konect

Want to get this thing out the door sooooo

$8900

This is take it away as it is with everything included, with Work rims, oil cooler, Defi gauges, and all the above mods still on it!! Even has rego till Feb :)

Needs, stock turbo and manifold fitted and dump > catback

Was running perfectly before I pulled the old turbo off on the weekend.

Can deliver it to metro Melbourne suburbs on a tow truck :)

Edited by konect
  • 2 weeks later...
swap for an ae86 with all 3sge and 6 speed, everything is done, just needs some tlc on the body and an engineers.

negatory my good man, just after cash :thumbsup:

  • 3 weeks later...
Guest
This topic is now closed to further replies.


  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...