Jump to content
SAU Community

Recommended Posts

I am about to purchase a whiteline handling pack

it comes with front and rear adjustable sway bars,

front castor kit and rear camber kit.

my question is which bushes r included in the handling pack, from my understanding the sway bars come with bushes

are there any other bushes that i should replace while the skyline is out of action?

has anyone fitted one of these kits to their skyline by themselves (i have 93 r33 gts-t)

cheers

Link to comment
https://www.sau.com.au/forums/topic/29569-whiteline-handling-pack/
Share on other sites

I've got the Whiteline swaybars and bushes. They give you new bushes and linkage arms for the rear, and new mounting bushes for the front, but for the front you need to re-use the original linkage arms and bushes to connect them to the suspension arm.

The other bushes are rear suspension arm bushes to reduce camber, and new front castor rod bushes to increase castor.

The fronts are pretty easy to do, just take the radius rods out and take them to a suspension workshop to press the old bushes out and press the new ones in (cost around $20) and then just put them back in the car and get a wheel alignment done.

The rears I haven't tackled yet because it looks a lot more complicated. I think there are 4 bushes per side that need to be pressed out, but you have to remove the whole suspension arms to do it. Once they are out it shouldn't be too hard to get them pressed out and in like the radius rods.

Are you talking about the castor and rear camber bushes only? If so then I would get them. I've yet to put my rear camber bushes in but I know it'll improve rear traction when I put them in.

The castor bushes improve the feel of the steering, it will make the steering a bit heavier but it will feel a lot more solid, like you can more easily point the car in the exact direction you want to go. More like a racing car feel :)

If you mean other bushes (sorry I'm not up to speed on what's in the current kit) then I can't say because I don't have any others. I imagine a front camber kit may be useful, not as useful as the rear though because there's no power to my front wheels. May be more useful on a GTR but even then you're not using the front wheels constantly for power.

I have had the handling pack on an R33 GTSt before and it is great ( car had standard ride height, wheels and dampers and springs), and it transformed it. I got it installed on seperate days, and I can tell you the swaybars made the most dramatic difference, particularly the rear one. I believe the castor, camber kits may come into their own if the car is lowered, but I didnt notice must of a difference on my standard ride height car. Maybe look at getting pineapples (whiteline call them KCA???) at the same time as they arent very expensive.

Paid $700ish and $150 labour (included alignment) 18 months ago from Tru Track in North Melbourne, would highly recommend them. Ask for Ralph, he is a funny bloke.

The camber kit is only for if you lower the car. At the standard height the camber is correct. I would say that installing the camber kit without lowering it would be detrimental to handling.

Hi guys, the front and rear camber kits are adjustable, so you can set them wherever you want. So it doesn't matter whether the car is lowered or not, you can both add or subtract camber.

Hi rs73, the standard shocks are "already pretty good" but you are changing them. What makes you think that the swaybars are different?

I absolutely guarantee you that a Skyline with standard springs and properly adjusted stabiliser bars will out handle a Skyline with upgraded lowered springs and standard stabiliser bars. Every time.

  Sydneykid said:
Hi rs73, the standard shocks are "already pretty good" but you are changing them.  What makes you think that the swaybars are different?

I absolutely guarantee you that a Skyline with standard springs and properly adjusted stabiliser bars will out handle a Skyline with upgraded lowered springs and standard stabiliser bars.  Every time.

Hm, I think you might be right... I talked to whiteline and the guy there recommended that I actually start with the stabiliser bars front & rear first.

Maybe I got it wrong the other way around when was told to change the shocks only not the bar....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Had a go at the stuck crush tube this afternoon. Tried things like grips and a chain wrench first but wouldn't just twist straight off. So got to work with a drill. Started small and kept a depth stop on to make sure I didn't drill into the bolt. Made a line of drill holes all the way up and enlarged them. Then a combination of chisel and Dremel to split it all the way up. Levered the split to get oil in there and eventually it gave a bit while levering. Worked it back and forth with loads more oil till it was spinning freely, then with grips I could work it downwards and off. And no significant damage to the bolt (not by me anyway - just the 27 years of rust)
    • Well, I'm tired. I'm tired because about 4PM yesterday, before today's appointment someone immediately bought my bumper. They couldn't get it any other day as they're on the way back to NSW. So I had to do that big GTR conversion I had been planning. Unfortunately, the information on SAU about what you need and how this is done is incomplete. So what should be a simple bolt on affair, yeah, it's not. Did you know if you use all GTR items the bonnet won't close? This little manuever sent me into about 1am the night before trying to dodge a way to get it closed. I will have to revisit this in the next few days  - or maybe not, I may let a body shop figure it out. It all needs to come up and my motivation to pull the bumper off is low. It also seems to hit things in the bay where the GTT bonnet didn't. Yes I used 100% new OEM GTR items. Today, I had the joy of driving to the dyno looking like this: Given I had roughed in the fuel and given sensible but pretty conservative timing, I didn't really bet on having the car drive out any real difference than when it drove in. Sadly due to a miscommunication and laptop fun and games (and almost bricking the dongle, prayers and firmware updates indeed), I ended up using HP Tuner credits to licence the car that was already licenced. So in the end my laptop was used. It turns out my butt dyno is still well calibrated after all this time. The 325kw was on 74% Ethanol, the 313kw line was on 98. The other line is the 'before' line which was 281kw. While the numbers are pretty low, they're pretty in line with what you'd expect. Even if US dynos bump the whole result up about 50KW, gaining 10-15% is similar gains.  The curve of the cam is pretty much spot on with what was discussed as well. All this said, it still feels bad to not see the number you secretly want to see. Even if the car drove great beforehand, and I knew pretty confidently the car would drive out much the same way it drove in due to the nature of a wellish dialled in LS1 not gaining much if anything at all from being tuned from where it was. As expected, the car isn't particularly sensitive to running it at anywhere between 12.0 and 13.0 - And the initial timing at 20deg and 12.0 made 308KW. So 3 degrees of timing, and leaning it out to 12.7 for 5kw, anything above stopped giving any benefit until E85 (which has an additional 2 deg as before). Car itself behaved entirely fine. I found out that 100C = 1.15V! IAT at about 7pm was 19C. I might mess with the bonnet mounting.. but given the REO NEEDS TO BE CHOPPED TO FIT A GTR BAR this is possibly something I may leave gathering (more) dust until it returns to paint jail.
    • It sounds farrrrrrr too cold at your place Duncan... Here I was thinking our 10 degrees overnight is getting cold...
    • oh yeah, reminded this morning....bin lids frozen shut too
    • In my case not, because of total reno. But yeah.
×
×
  • Create New...