Jump to content
SAU Community

Recommended Posts

Parts list and prices

Whiteline Heavy Duty Front Swaybar BRAND NEW BNF24Z. Fits ALL model R33s including NAs except GTS4s and GTRs. $200

Whiteline Rear Upper Control Control Arm Bushes BRAND NEW W0579, $70ono Fits r32, r33, r34, 180sx, ceferio, etc

Whiteline Rear control arm caster adj. bushes BRAND NEW, not sure what car there for but part number is KCA337. $70ono

R32 GTS4, R33 GTS4, Stagea Front swaybar $20

R32 GTS4, R33 GTS4, Stagea Rear swaybar $20

post-40593-1258768364_thumb.jpg post-40593-1258768396_thumb.jpg post-40593-1258768489_thumb.jpg

R33 GTS4 stock shocks w/ aftermarket springs, Shocks are in ok condition, no signs of leaks. As for springs there in good condition just not 100% which brands they are, being red, either pedders, nismo or apexi springs?. They might be pedders but I can't tell. Fits R32 GTS4, R33 GTS4, GTS(25), GTST. $200ono

post-40593-1258768742_thumb.jpg

Genuine Momo Steering wheel. Typ D35 KBA 70116 is the model. In excellent condition, only very minor wear marks. $170ono

RB20/RB25 Crossover pipe in good condition - $20

Gates Timing belt used 10,000kms only $45ono

post-40593-1258768815_thumb.jpg

R33 GTR INTERIOR

R33 GTR Centre Console compartment (compartment bit behind gear boot). Excellent condition, no damages whatsoever. $50

R33 GTR Full Interior panels 2xFront 2xRear. Great condition, no marks, no scratches, no tears. $150

R33 Climate control unit. In good working order no damage. $50

R33 Front and Rear Seat Belt sets, Good condition was working perfect when removed. $150

post-40593-1258768951_thumb.jpg post-40593-1258769012_thumb.jpg post-40593-1258769050_thumb.jpg post-40593-1258769121_thumb.jpg

R33 GTR Front 5 Stud Hub Assembly good for 5stud conversions $150ono

post-40593-1258769158_thumb.jpg

Stainless steel Cannon Muffler Angle Cut Tip - 2.5'' Inlet, 5.5'' Barrel, 4.5'' Angle cut Tip

Very good condition no dents, came off R33 $40ono

post-40593-1258769208_thumb.jpg

R33 Series 2 VCT N/A Motor RB25DE 147kw, 114,000kms motor is in A1 condition, regularly serviced synthetic oils. Only pulled out for conversion. PRICE DROP TO $550ono take it now or it goes to my friend soon. Includes 4WD Sump and Front Diff and shaft, wiring loom and ecu iridium plugs, exhaust manifold and intake pipe. Can also be used in RWD application, just swap sump with a RWD sump.

NOTE: Took off some parts as I needed them. These include, water pump, tensioner and idle bearings, harmonic balancer, A/C and pwr/steer pump, so just pretty much 100,000km kit.

R33 GTS4/GTR Series 2 4WD Gearbox will fit stageas as well as any other running 4wd gear including GTRs. 114,000kms in good working condition, however 4th started to slightly crunch after I had oil changed too thin, needs thicker oil and will be ok.

$400ono

RB25 Flywheel, Factory in good condition fits RB20 as well. $45

LOCATED IN SYDNEY, WILL POST BUT BUYER PAYS FREIGHT. 0412 297 325

Parts list and price drops Update

Whiteline Rear Upper Control Control Arm Bushes BRAND NEW W0579, $60ono Fits r32, r33, r34, 180sx, ceferio, etc

Whiteline Rear control arm caster adj. bushes BRAND NEW, not sure what car there for but part number is KCA337. $60ono

R32 GTS4, R33 GTS4, Stagea Front swaybar $20

R32 GTS4, R33 GTS4, Stagea Rear swaybar $20

R33 GTS4 stock shocks w/ aftermarket springs, Shocks are in ok condition, no signs of leaks. As for springs there in good condition just not 100% which brands they are, being red, either pedders, nismo or apexi springs?. They might be pedders but I can't tell. Fits R32 GTS4, R33 GTS4, GTS(25), GTST. $190ono

Genuine Momo Steering wheel. Typ D35 KBA 70116 is the model. In excellent condition, only very minor wear marks. $170ono

RB20/RB25 Crossover pipe in good condition - $20

Gates Timing belt used 10,000kms only $40ono

R33 GTR INTERIOR

R33 GTR Centre Console compartment (compartment bit behind gear boot). Excellent condition, no damages whatsoever. $50ono

R33 GTR Full Interior panels 2xFront 2xRear. Great condition, no marks, no scratches, no tears. $150ono

R33 Front and Rear Seat Belt sets, Good condition was working perfect when removed. $150ono

R33 GTR Front 5 Stud Hub Assembly good for 5stud conversions $145ono

Stainless steel Cannon Muffler Angle Cut Tip - 2.5'' Inlet, 5.5'' Barrel, 4.5'' Angle cut Tip

Very good condition no dents, came off R33 $40ono

R33 Series 2 VCT N/A Motor RB25DE 147kw, 114,000kms motor is in A1 condition, regularly serviced synthetic oils. Only pulled out for conversion. PRICE DROP TO $500ono take it now or it goes to my friend soon. Includes 4WD Sump and Front Diff and shaft, wiring loom and ecu iridium plugs, exhaust manifold and intake pipe. Can also be used in RWD application, just swap sump with a RWD sump.

NOTE: Took off some parts as I needed them. These include, water pump, tensioner and idle bearings, harmonic balancer, A/C and pwr/steer pump, so just pretty much 100,000km kit.

R33 GTS4/GTR Series 2 4WD Gearbox will fit stageas as well as any other running 4wd gear including GTRs. 114,000kms in good working condition, however 4th started to slightly crunch after I had oil changed too thin, needs thicker oil and will be ok.

$385ono

R33 S2 NA ECU great working condition - $140

STAGEA S1 ECU great working condition - $140

CONTACT NUMBER 0412 297 325 located in sydney.

Edited by OoskylineoO
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...