Jump to content
SAU Community

Recommended Posts

have a set of front and rear R32 GTR factory seats with no holes or burns, they are virtually perfect!!! not sure how to post pics on here but if your serious i will mms as many pics as you like. Looking for $750 Contact Paul on 0412 383 133 for further details, located in Melbourne.

Link to comment
https://www.sau.com.au/forums/topic/297386-r32-gtr-seats-immaculate/
Share on other sites

yes they are bucket seats and they hug you very tightly!!!!!! have no idea what else they fit in because i have never really been into skylines !!!! but id say they wouldn't be that much different, just ask a motor trimmer!! call me if your serious

  • 4 weeks later...
  • 3 months later...
have a set of front and rear R32 GTR factory seats with no holes or burns, they are virtually perfect!!! not sure how to post pics on here but if your serious i will mms as many pics as you like. Looking for $750 Contact Paul on 0412 383 133 for further details, located in Melbourne.

Hi Paul, I am interested in the front seats if they are in very good knick - pls pm some pics if you can, thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If you take the top half of the intake off you can unbolt the flap off the shaft and leave the shaft in there blocking the hole. Then you can remove the little vacuum canister off from under the manifold and get a spare vacuum line to run to the ECU. I can take some photos of it later. Probably best to get the vacuum source to the ECU sorted first though. Mine all worked mint with the base map from the GTT an I've pretty much let the closed loop sort the fueling and took 1 degree out of the whole timing map.
    • This IS something you also have to configure in Haltech (or at least I did in the past when going from onboard-to-ECU map sensor and an external MAP sensor in haltech land).
    • I'm hoping it's something as simple as the ECU is looking for an external MAP sensor, but he is trying to use the onboard MAP sensor.
    • You won't need to do that if your happy to learn to tune it yourself. You 100% do not need to do that. It is not part of the learning process. It's not like driving on track and 'finding the limit by stepping over the limit'. You should not ever accidently blow up an engine and you should have setup the ECU's engine protection to save you from yourself while you are learning anyway. Plenty of us have tuned their own cars, myself included. We still come here for advice/guidance/new ideas etc.  What have you been doing so far to learn how to tune?
    • Put the ECU's MAP line in your mouth. Blow as hard as you can. You should be able to see about 10 kPa, maybe 15 kPa positive pressure. Suck on it. You should be able to generate a decent vacuum to about the same level also. Note that this is only ~2 psi either way. If the MAP is reading -5 psi all the time, ignition on, engine running or not, driving around or not, then it is severely f**ked. Also, you SHOULD NOT BE DRIVING IT WITHOUT A LOAD REFERENCE. You will break the engine. Badly.
×
×
  • Create New...