Jump to content
SAU Community

Recommended Posts

Do not miss this great deal!!!!! Fully Built (0 mileage after build) RB26DETT race engine for sale. It can easily handle over 1,000HP, has the following and more:

  • Polished / Ported Head
  • 1000cc injectors
  • new valves
  • tomei valve springs
  • HKS 272 camshaft in/ex
  • ARP main bearing studs
  • ARP head studs
  • Polished Block
  • Tomei Cam pulleys
  • Aeromotive Fuel Regulator
  • HKS Fuel rail
  • HKS Pulley Damper
  • Tomei Full Race Gasket Set
  • ACL Race Bearings
  • Tomei Connector Rods
  • CP Pistons
  • 1,000cc Injectors
  • Aeromotive Fuel Regulator
  • Race intake Plenum
  • Big Single Throttle Body
  • Jun Oil Pump
  • Greddy Oil Sump
  • Greddy T88

Turbo with headers and HKS wastegate

Also many more items not mentioned above, It is fully built and the parts alone were purchased for more than BHD5,000 (excluding main engine and labor charge). Willing to sell completely built engine (including Turbo Kit) for AUD 13,000 (neg.).

Please contact Ali

00973 39330337 or email on [email protected]

hey mate,

just a couple of questions for your sake,

where are you located?

will you post?

how much for postage to different area's?

can you put some pics up, it will help lots?

what sort of saftey is there for the buyer, as you are new, not implying that you are dodgy or anything, but security is nice...

apart from that, your price is very good for all that gear, and you should have no issues selling it. all the best

cheers

hey mate,

just a couple of questions for your sake,

where are you located?

will you post?

how much for postage to different area's?

can you put some pics up, it will help lots?

what sort of saftey is there for the buyer, as you are new, not implying that you are dodgy or anything, but security is nice...

apart from that, your price is very good for all that gear, and you should have no issues selling it. all the best

cheers

Thanks Sebastion.... I'm located in Bahrain, I'm not sure how much postage would cost, so I don't know if i can pay all myself or shre the postage fee with the buyer (I'll research it and update). I'm getting some pics this weekend hopefully i can upload them. As for safety, I'm not sure what type of safety i can offer maybe u can suggest (I never sold engine before :thumbsup: ) maybe u can suggest what the norm is?

Cheers....Ali

Thanks Sebastion.... I'm located in Bahrain, I'm not sure how much postage would cost, so I don't know if i can pay all myself or shre the postage fee with the buyer (I'll research it and update). I'm getting some pics this weekend hopefully i can upload them. As for safety, I'm not sure what type of safety i can offer maybe u can suggest (I never sold engine before :P ) maybe u can suggest what the norm is?

Cheers....Ali

hey Ali,

jeez, your a fair way away, our guess is that postage would be a fair bit, and that would be a fair dint in your pocket, as the engine is cheap enough, as for saftey, not too sure how to go about that, only thing would be paypal, but they are a rip-off... you should just sell it too one of the fella's in dubai, surely they would have enough money for an engine of these specs... cant wait to see pics mate, bet you would be disapointed to sell it, as we know how much money has been pored into it... anyways good luck with the sale mate. hopefully people realise what a bargin it is.

Hey Ali,

just a few more questions, who built the motor, ported the head etc. Is the crank stock and which T88 is it ?

Cheers,

Stav

our guess would be the 38gk, as thats rated a tad higher than 1000hp.

Is this for real??.....

Sounds abit suspicous to me....

Why Suspicious? I had an R33 I was building for the drag race, but i got a good price for a sale without the engine... now I'm stuck with the engine, I was gonna put it in my 180sx but traffic directorate said "no way" it would pass inspection, so I have to sell the engine now and start all over with a SR20 :P

Why Suspicious? I had an R33 I was building for the drag race, but i got a good price for a sale without the engine... now I'm stuck with the engine, I was gonna put it in my 180sx but traffic directorate said "no way" it would pass inspection, so I have to sell the engine now and start all over with a SR20 :P

3 posts and asking lots of cash..thats sus..its the internet...sorry.

just post a pic of the engine with you standing next to it holding a sign that says LHD GTR SAU...just to confirm you have it would put a genuine buyer at ease.

cheers

Edited by DiRTgarage
Hey Ali,

just a few more questions, who built the motor, ported the head etc. Is the crank stock and which T88 is it ?

Cheers,

Stav

Stav,

the negine was built by locals who have quite a succesfull drag racing team, the head was also ported by a local (no special equipment but he is good) the crank is stock and I'm not sure which T88 it is but I'll check... I attached some pics of other cars the mechanic built: the shop is called 'Get Boost' he has built many more but these are the latest....

regards,

Alipost-18738-1259065895_thumb.jpg

post-18738-1259065957_thumb.jpg

post-18738-1259065973_thumb.jpg

post-18738-1259065987_thumb.jpg

post-18738-1259066066_thumb.jpg

post-18738-1259066234_thumb.jpg

post-18738-1259066278_thumb.jpg

post-18738-1259066324_thumb.jpg

post-18738-1259066479_thumb.jpg

3 posts and asking lots of cash..thats sus..its the internet...sorry.

just post a pic of the engine with you standing next to it holding a sign that says LHD GTR SAU...just to confirm you have it would put a genuine buyer at ease.

cheers

Cool I can do that, How about I hold that day's newspaper as well :P

agreed.. $13,000 for an engine 10,000km away from a new user. if its legit, good luck trying to sell!

OK I get it... I would be suspicious as well, but that's the deal. Although I need to double check on the shipping if its too much I'll either increase price or just try to sell it in Dubai...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
×
×
  • Create New...