Jump to content
SAU Community

Recommended Posts

Here is our selection of brand new HDI(Hybrid development International) Boost controller kits, Gauges and Rocket Launcher Switches.

HDI are well known in Australia for the quality of their Front mount intercooler kits and EBC's.

Why choose HDI? Check these vids for a few reasons....



- The link next to each item below will take you to our site where you can view pics & details and where you can purchase and pay via paypal with our secure online checkout system.


BOOST CONTROL KITS:


HDI-SBC-D-EVOLUTION2.jpg

HDI BOOST CONTROL KIT & EVOLUTION BOOST GAUGE - AU$250.00 delivered - Addtocart.gif
This boost controller has been designed for universal fitment to any turbocharged vehicle. The HDI-SBC-D-EVOLUTION provides the driver with precision boost and accurate display and measurement.

CLICK HERE FOR BANK DEPOSIT OR MONEY ORDER

HDI-SBC-D-EVOLUTION2.jpg

Product Function:

The HDI-SBC-D-EVOLUTION uses a high precision temperature compensated pressure sensor providing the precision pressure reference for your turbo boost control function.
By employing a unique closed loop boost regulating technique, the boost fluctuation is minimized once the desired boost level is reached. The anti lag program minimizes turbo spooling time so that you can have Fast, Sharp acceleration while maintaining your ideal regulated boost level.
The HDi 60mm Super boost Gauge Type D (HDI-SBG-D) employs advanced stepper motor technology for accuracy and fast response. The dual display design shows both BAR and PSI in analogue and digital format simultaneously. This provides the driver with easy and precise read out in the shortest possible time.

Product Features:

HDi Super Electronic Boost Controller
- Dual in cabin adjustment
- Closed loop boost regulation
- Fast target boost locking
- 120psi Pressure balanced solenoid
- Micro Processor controlled
- Rigid aluminum casing

SBC-D_SE_B.jpg

HDi SBG-D Plug & Play 60mm Boost Gauge
- Day & Night theme
- Peak hold and recall function (with HDI-SEBS)
- Dual read out both Digital & Analogue Display
- Dual Measurement PSI & BAR
- Full 270 Degrees sweep dial provides superb visibility
- Advanced full electronic stepper motor drive
- High Intense light emit diode back light for high visibility
- Comes with mounting bracket

hdi%20gauge.jpghdi%20gauge%202.jpghdi%20gauge%203.jpg

Universal easy installation. 12 Month warranty.

CLICK HERE FOR THE INSTALL GUIDE

More info.....
SBC-D-REVOLUTION2.jpg

Related videos.....



---------------------------------------------------------------------------------------------------------------------------------------

HDI BOOST CONTROL KIT TYPE D SE (Special Edition) - AU$200.00 delivered - Addtocart.gif
Product Features:
HDi Super Electronic Boost Controller with Dual in cabin adjustment
Closed loop boost regulation
Fast target boost locking
120psi Pressure balanced solenoid
Micro Processor controlled
Rigid aluminum casing
Universal easy installation

Product Function:
The HDI-SBC-D uses a high precision temperature compensated pressure sensor providing the precision pressure reference for your turbo boost control function.
By employing a unique closed loop boost regulating technique, the boost fluctuation is minimized once the desired boost level is reached.
The anti lag program minimizes turbo spooling time so that you can have Fast, Sharp acceleration while maintaining your ideal regulated boost level.
- Easy install
- 12 month warranty

SBC-D_SE_B.jpg

CLICK HERE FOR THE INSTALL GUIDE

More info.....

SBC-D-SE-FINAL2.jpg

CLICK HERE FOR BANK DEPOSIT OR MONEY ORDER

---------------------------------------------------------------------------------------------------------------------------------------


HDI ELECTRONIC BOOST CONTROL KIT TYPE R - AU$160.00 delivered - Addtocart.gif
- UNIIVERSAL - Fits on ANY turbo engine in ANY vehicle
- Easy to read instruction manual
- Optional arming switch for dual stage capabilities
- 12 month warranty

More info.....

HDi-EBC-TYPE-R2.jpg

As featured in HPI Magazine.


CLICK HERE FOR BANK DEPOSIT OR MONEY ORDER

---------------------------------------------------------------------------------------------------------------------------------------

HDI ELECTRONIC BOOST CONTROL KIT TYPE R & MECHANICAL BOOST GAUGE - AU$190.00 delivered - Addtocart.gif
- UNIIVERSAL - Fits on ANY turbo engine in ANY vehicle
- Easy to read instruction manual
- Optional arming switch for dual stage capabilities
- 30psi Mechanical Boost Gauge (52mm)
- 12 month warranty

HDI-EBC-R%20AND%20SBG-M-1B.jpg

NOTE - ROCKET ARMING SWITCH ASSEMBLY IS AN OPTIONAL EXTRA.
PRICE FOR THE SWITCH ASSEMBLY IS AU$15.00

CLICK HERE FOR BANK DEPOSIT OR MONEY ORDER

---------------------------------------------------------------------------------------------------------------------------------------

HDI MECHANICAL BOOST GAUGE - AU$40.00 delivered - Addtocart.gif
THE HDI-SBG-M MECHANICAL BOOST GAUGE FEATURES A 52mm (2 inch) 270 DEGREE SWEEP WITH A 30 PSI MAXIMUM RATING. THE BOOST GAUGE INCLUDES A SEPERATE BACKLIGHT, CONNECTIONS AND PARTS FOR EASY INSTALLATION.
- UNIIVERSAL - Fits on ANY turbo engine in ANY vehicle
- Easy to read instruction manual
- 30psi Mechanical Boost Gauge
- 12 month warranty

HDI-SBG-M.jpg

CLICK HERE FOR BANK DEPOSIT OR MONEY ORDER

---------------------------------------------------------------------------------------------------------------------------------------



HDI MISSILE/TOGGLE ROCKET LAUNCHER SWITCH - RED - AU$12.00 shipped - Addtocart.gif
- Choice of red switch with red LED light or blue switch with blue LED light.
- UNIVERSAL FIT
- SIMPLE TO USE AND EASY TO INSTALL
- CAN BE USED WITH NOS
- 20 AMP CURRENT CAPACITY
- 12-24v

red.jpg



Please PM or contact us if you have any questions regarding these items.

Cheers,
Paul. smile.gif
www.performance-wise.com
www.performance-wise.net
www.yellowjacketscoilpacks.com

Link to comment
https://www.sau.com.au/forums/topic/297756-hdihybrid-shop-electronics/
Share on other sites

  • 6 months later...
Do you sell the HDi SBG-D Plug & Play 60mm Boost Gauge by itself?

If you do, do you know if it'll fit into the stock triple cluster pod of a R34 GTT??

Cheers.

I can supply them by them selves but you will need the control unit for it to operate.

What size are the gauges in the R34 cluster? If they take 60mm then Id say it should fit. :yes:

  • 1 month later...

Ive got a HDI-SBG-M MECHANICAL BOOST GAUGE but I can for the life of me figure out how to install the light that comes with it. With it only having 1 red wire im lost. Can you help wit some instructions or where I can find them? I've googled but can't find anything.

Cheers

Ive got a HDI-SBG-M MECHANICAL BOOST GAUGE but I can for the life of me figure out how to install the light that comes with it. With it only having 1 red wire im lost. Can you help wit some instructions or where I can find them? I've googled but can't find anything.

Cheers

PM sent :D

  • 9 months later...

i need a replacement boost gauge for the HDI BOOST CONTROL KIT & EVOLUTION BOOST GAUGE model how much will it be for the gauge alone plus shippment

The gauge alone is $85 delivered.

:cheers:



  • Similar Content

  • Latest Posts

    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
×
×
  • Create New...