Jump to content
SAU Community

Recommended Posts

where do i start...

i brought this car in august it arrived from japan in september i drove it for two days and the bottom end bearing shit its self.. since then it sat for another month and a half then decided to put a r33 series 3 vspec motor. i had the motor comp tested and it came out a solid 120 all the way through.. i got the car back last thursday and yesterday a piston ring gave way!!! F@#K... i have decided to sell it as i simply carnt afford to put it on road... the car owes me well over 20 grand and it still hasent got compliance and rego.. my bad luck is someones good luck to pick up a good buy. the car still drives fine and starts with out a problem. all inspections are welcome! but please no time wasters as i simply carnt deal with another persons head ache as i have too much on my plate as it is.

modifications are below..

series 3 r33 gtr engine.

hks pod filter

hks front pipe

custom split dump pipes

3 inch exhaust with in cabin silencer.

hks twin plate clucth

r33 gtr gearbox

torque splitter rwd/4wd

hks boost controler

pivot boost gauge

blits oil, water and exhaust temp gauges

trust front mount intercooler

800 cc injectors

bigger fuel pump

half roll cage

r33 gtr front seats

autometer silver face monster tacho with shift light

r34 gtr front brake rotors, rear brakes are cross drilled

work equip 17 * 9.5 wheels with bridgstone tyres 3 piece rims

cusco cooler pipeing

blitz blow-off valves

electric speedo with timer for quarter mile, lap timeing, odometer, 0 to 100kms and 0 200m

N1 front bar, lip side sskirts and pods.

ALSO have a power fc with hand controller whicth i can give with the car for extra on the aggreed price when the car is being sold

the over all condition of the car inside out and is JUST MINT!! i dare anyone to compare.. the dash has no bubbles what so ever

the paint is in very good nick as well with a slight gold pearl through it.

PRICE: $15 500 VERY VERY VERY NEGOTIABLE!!!!

I AM NEGOTIABLE WITH THE PRICE BECAUSE I JUST WANT THIS CAR GONE TO MOVE ON TO SOMETHING ELSE. PICTURES WILL BE UP TOMMOROW NIGHT. IF YOU HAVE ANY GENUINE ENQUIRES OR QUESTIONS PLEASE CALL LOKY ON 0423682131 ALL INSPECTIONS ARE WELCOME!!

cheers loky.

  • Replies 76
  • Created
  • Last Reply

Top Posters In This Topic

these photos dont do the car any justice.. gotta see to really appreciate it

ALSO HAS N1 HEAD LIGHTS AND NISMO CLEAR INDICATORS

Edited by loky

so it still need to be complianced and it screwed hmmmmmmmmmm 15000 u can but a decent gtr man to be honest i dont think u will get that sorta money sence those things need to be done nice car but yeh :P u would be lucky to get 10k for it not being sad or anything

Edited by navanskyline

mate im asking less then 15 grand thats why ive got very negotiable up there. for 15 grand u will get ur self a run down gtr thats going to shit its self. with my one your getting a MINT!!! gtr inside and out. with a series 3 r33 gtr engine. even though the piston ring is gone. you could get thing on road for 18 and wouldnt have a problem selling it for 20!

PRICE DROP TO $14 000 NEGOTIABLE I NEED THIS GONE NOW!!!!!! will swap for a 180sx type x with cash my way!

Edited by loky

i had two people call me yesterday wanting to look at the car and no one showed up!!! dont waste my time and say your going to come when use arnt. i have things to do as well!!! bump!!!!!!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...