Jump to content
SAU Community

Recommended Posts

I just got my car serviced by a performance workshop here in Sydney, and I asked them to check out to see if they could fix my rough idle while they were at it. They had a heap of WRX's out the front and I heard they did job on Skylines, so I was eager to give them a go.

They replaced my spark plugs without asking if I wanted copper or not, but that's ok. They changed my air filter even though it was clean, but that's fine also. I don't care about that - they were trying to fix my idle.

But when they forget to do up half of the vacuum hoses after taking the crossover pipe off, you gotta wonder. Here I was the next day driving home from work, gave my car a little boost, and all I could feel was my car doing nothing special and hear all this air going everywhere (after which the engine stalled). The hose going from the intercooler to the crossover pipe had blown off, and the hose clamp wasn't even done up. I looked some more, and half of the other vacuum hoses had their clamps just dangling around the pipe.

Luckily, the owner of the house I'd "parked" in front of came out to see what was the matter, and after a bit of mucking around with a pair of pliers and a shiftey we had it running again. I gave the engine bay a throurough check over when I got home, and attacked all my hose clamps with a socket set (and yeah, the others were pretty loose too)...

Am I alone in thinking this is a little unprofessional?

BTW - they didn't fix my idle - they said they couldn't work it out...

i'd be goin back for my money and if they didn't give me some sorta refund for the troubles and possible damage to my engine i'd be goin straight to the consumer commission / better business beureu and any one else i could think of... that's just plain bullsh#t for a workshop...

Hah! And yet some more! They didn't put the electrical plug on the TPS back in properly, so my car karked it today after it shook loose. Luckily I knew how to run the ECU diagnostics, otherwise I would have had to get the car towed back home. The plug just clicked back in and now it's nice and secure again.

On a positive note, they did refill my windscreen washer bottle, so it seems they did something right.

Anyway, if anyone's thinking of going to a "performance" shop in the eastern suburbs let me know and I'll tell you who not to go to.

You paid for a service and by the sounds of it they put you at a risk by driving a car that had not been set back up properly. I would confront them ask for my money returned, if they declined I would ring up the Office Of Fair Trading and lodge a complaint against their business.

Backup - it's against the rules, man. But you can PM me. I do believe I asked for suggestions for a performance workshop in the Maintenance forum though :D

Anyway, if they don't give me my money back who would be the best to call? Office of Fair Trading, or isn't there a auto-mechanic body?

Backup - it's against the rules, man. But you can PM me. I do believe I asked for suggestions for a performance workshop in the Maintenance forum though :D

Anyway, if they don't give me my money back who would be the best to call? Office of Fair Trading, or isn't there a auto-mechanic body?

don't waste your time trying to prove anything because you have fixed problem, so no real proof (you could use man that helped you as wit). it is just so hard to prove mech workshops haven't done what you asked, over charge, even bother to replace what they say which is very sad but fact. fair trading might give them a call but that's it, so best option is ask them wtf & you can gauge by what your told how things will unfold. don't think your only 1 because i asked advise went to workshop out west & if was wild west they would be dead.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
    • Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
×
×
  • Create New...