Jump to content
SAU Community

Recommended Posts

I just got my car serviced by a performance workshop here in Sydney, and I asked them to check out to see if they could fix my rough idle while they were at it. They had a heap of WRX's out the front and I heard they did job on Skylines, so I was eager to give them a go.

They replaced my spark plugs without asking if I wanted copper or not, but that's ok. They changed my air filter even though it was clean, but that's fine also. I don't care about that - they were trying to fix my idle.

But when they forget to do up half of the vacuum hoses after taking the crossover pipe off, you gotta wonder. Here I was the next day driving home from work, gave my car a little boost, and all I could feel was my car doing nothing special and hear all this air going everywhere (after which the engine stalled). The hose going from the intercooler to the crossover pipe had blown off, and the hose clamp wasn't even done up. I looked some more, and half of the other vacuum hoses had their clamps just dangling around the pipe.

Luckily, the owner of the house I'd "parked" in front of came out to see what was the matter, and after a bit of mucking around with a pair of pliers and a shiftey we had it running again. I gave the engine bay a throurough check over when I got home, and attacked all my hose clamps with a socket set (and yeah, the others were pretty loose too)...

Am I alone in thinking this is a little unprofessional?

BTW - they didn't fix my idle - they said they couldn't work it out...

i'd be goin back for my money and if they didn't give me some sorta refund for the troubles and possible damage to my engine i'd be goin straight to the consumer commission / better business beureu and any one else i could think of... that's just plain bullsh#t for a workshop...

Hah! And yet some more! They didn't put the electrical plug on the TPS back in properly, so my car karked it today after it shook loose. Luckily I knew how to run the ECU diagnostics, otherwise I would have had to get the car towed back home. The plug just clicked back in and now it's nice and secure again.

On a positive note, they did refill my windscreen washer bottle, so it seems they did something right.

Anyway, if anyone's thinking of going to a "performance" shop in the eastern suburbs let me know and I'll tell you who not to go to.

You paid for a service and by the sounds of it they put you at a risk by driving a car that had not been set back up properly. I would confront them ask for my money returned, if they declined I would ring up the Office Of Fair Trading and lodge a complaint against their business.

Backup - it's against the rules, man. But you can PM me. I do believe I asked for suggestions for a performance workshop in the Maintenance forum though :D

Anyway, if they don't give me my money back who would be the best to call? Office of Fair Trading, or isn't there a auto-mechanic body?

Backup - it's against the rules, man. But you can PM me. I do believe I asked for suggestions for a performance workshop in the Maintenance forum though :D

Anyway, if they don't give me my money back who would be the best to call? Office of Fair Trading, or isn't there a auto-mechanic body?

don't waste your time trying to prove anything because you have fixed problem, so no real proof (you could use man that helped you as wit). it is just so hard to prove mech workshops haven't done what you asked, over charge, even bother to replace what they say which is very sad but fact. fair trading might give them a call but that's it, so best option is ask them wtf & you can gauge by what your told how things will unfold. don't think your only 1 because i asked advise went to workshop out west & if was wild west they would be dead.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Started sifting thru my brakes to decide which ones I will run on Clem   Made me think I should just put them all on Silver...for when brake fade just isn't an option   Should be able to bump rotor up from 343x32 to 348x36 off Supra. Not sure if the Supra annulus is right for the Alcons or APs but trying g to find a used Supra\M4 rotor to test fit The Alcons seem to gain 1-2mm clearance which all helps  
    • So car is getting a few mods to the cage and some jacking points welded in Meantime Ol Silver gets a new gearbox and shiny clutch.  Old Box is being set aside for Clem  
    • Probably speedometer itself if the odometer is ticking. If the needle is stuck from a bit of grease or something that can cause it to stay at 0. Or a cracked solder joint in the speedometer can do it too.
    • Thanks Fella’s   to take this off topic and to elaborate a bit more. I have an rb25/30 going into a r32 GTST.. expected to make around 600-700hp. Would you?   A) R34 GTT box   B) CD00#?  I’ve seen a few posts about the CD swap and sounds fairly involved with making it fit etc but if it’s worth the work then I’ll go that way
    • Lower at the hubs. Funny I forgot to mention that part. Do this pull here I turned the camera off too soon but the graph shows a drop at the top and that was because the pipe from the turbo blew off. The tuner said we could’ve made possibly another 15 whp. He also added if I switched to ethanol we could up the boost some more as well. I was comfortable capping it at the most of 20 pounds. Turns out the turbo pipe just needed a new worm clamp. Got home replaced that then did a third gear pull from 3k to 7200 rpm and the power was great to the top. I just got an ecu mounting bracket from IEE that I need to try and get everything to fit well. It’s a PITA to get the harness and ecu fit properly behind that kick plate 
×
×
  • Create New...