Jump to content
SAU Community

Recommended Posts

Ok guys want this crap gonski! All in good condition. Pickup Items located in Liverpool area NSW Cheers

Rear spoiler $35 pic 1 pic 2 pic 3 pic 4

Rear spoiler in average condition. paint is fading on both corners. could do with a respray. one small chip on right side as can see in pics. wiring plug there, missing one or two bolts which shouldnt be a problem

2x Kuhmo Kh15 195/65/14 Cheap As $25 pic 1 pic 2 pic 3

Great for spares, about 50% tread left on them at a guess. One tyre has a nail in it, which can be removed i guess. I am not a professional so couldn't tell you 100%. Either way going cheap. Been in storage for a while just want them gone.

R32 Nissan skyline 3" exhaust turbo back twin tip $170 pic 1 pic 2 pic 3 pic 4

Turbo back exhaust removed off car want something different. 3" dump/front pipe through to cat and magnaflow twin tip muffler. Not to loud but has a nice deep growl, buyer will not be dissappointed. Direct bolt onto standard turbo. Cheapest upgrade you can do if you have stock exhaust. Selling cheap it's taking up space. Not the prettiest thing to look at but it does the job. Mid section pipe will need to be cut off on one of the ends and a new 3 bolt flange welded on. As i had it changed when i replaced my cat converter few years back.

Link to comment
https://www.sau.com.au/forums/topic/299894-r32-full-exhaust-and-rear-spoiler/
Share on other sites

  • 1 month later...
  • 2 weeks later...
  • 2 weeks later...

Few more items added guys, still have the tyres and exhaust. Price drop on exhaust $150

2 X green label AFMS been in garage for ages were both working when replaced, one is missing the mesh. cannot gurantee working condition $30 each

afm 1

afm 2

afm second

afm second 1

1 pair of indicators orange type - both in good condition but both have broken mounts see pics - $40

indicators

indicators 2

1 pair of clear indicators bought off ebay so they have gone yellowish see pics. all plastics and mounts are good $30

clear indicators

clear 2

1 r32/r33 starter motor bosch brand new bought 2 years ago only trial fitted hence few scratch marks never used. should work fine

since its brand new but i cant gurantee it because i never used it. $100

starter motor

starter motor 2

starter motor 3

1 x r32 whiteline front strut brace brand new $120

Strut brace

strut brace 2

rb20 turbo + box full parts see pics. pulled off car at about 120,000kms was running good no smoke from what i remember. Very little shaft play

only run 10psi going cheap $160 note actuator and all parts except turbo are off a rb25

turbo

turbo 2

turbo 3

turbo 4

1 x nismo Fuel pressure regulator - bought off here a year ago never fitted should work fine $100

All items located in NSW Liverpool area and can post all except for exhaust just ask for a quote. Thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • How dare you sell your unreliable Skyline and buy a reliable, Toyota/Yamaha car with a strong gearbox, torsen LSD and Toyota reliability. At least you won't need to worry about oil pumps, big catch can, oil restrictors, blowing off power steering belts, sheering off 3rd gear, failing ABS relays/pumps, etc.
    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
×
×
  • Create New...