Jump to content
SAU Community

R31 ECCS ECU pinout diagram

BIGBLOCKR31COUPE

By BIGBLOCKR31COUPE,
in Engines & Forced Induction

 Share

Recommended Posts

rsx84 Veteran

rsx84

Posted
Posted

i was talking about taking time tracing wires back to your ecu (which i asume is the r31 eccs). sorry dude.

try e-mailing this bloke

[email protected]

he sent me a english version r32 wiring diagram after i got no help from nissan aus!

BIGBLOCKR31COUPE Experienced

BIGBLOCKR31COUPE

Posted
  • Author
Posted

The reason I am asking is that I am about to help a friend put an ECCS engine into his dead NICS powered R31 coupe. He is trying to keep the process as simple and cheap as possible. We haven't gone to purchase an engine yet and he is worried that he may be up for a small fortune to have the wiring done. If the ecu uses the same kind of plugs as his NICS ecu it will be very easy for us to separate the engine loom from the others ourselves and only replace the one simple loom (the NICS ecu has 4 separate looms with their own plugs) leaving the other looms connected. If the pinouts are like the R32 pinouts we will need outside help. So it would help if anyone knows whether the R31 ECCS pinouts are the same style as the NICS ones.

Thanks,

Geoff.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Chupapy
      Coolant leak?

      By Chupapy · Posted

      Is it alright to top up with just another green coolant?
    • Songo
      New kid on the block

      By Songo · Posted

      thanks GTSboy. My confusion at the moment is i am trying to locate the ignition, ECU battery power and the ECU negative The closest thing i can find is the for the S15 on Page 8 of the Wiring Specialties web page https://drive.google.com/file/d/0B9F33_M_GgENQnZ6STMxVmVNd1E/view?resourcekey=0-eZ4nNRwRoqa1qvKlWWHm8A I cannot find the same diagram for the R33 RB25DET Series 2 dash plug pin out.... Do you know what the Pins? or know where i can find the same pinout diagram for the RB dash plug? Thanks for the advice on the box... i like a 6 speed so might be on the lookout or the box now.. a topic of discussion for another post...
    • Chupapy
      Coolant leak?

      By Chupapy · Posted

      Will have a look at that. I cant see any leaks 
    • GTSBoy
      Coolant leak?

      By GTSBoy · Posted

      Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
×
×
  • Create New...