Jump to content
SAU Community

Recommended Posts

Yeah you won't believe this but I currently have a Stock Standard ADR approved compliance Catalytic converter on my R33 and when i went for the DECC inspection (i got defected for noise levels a while ago and sent to the decc) , the guy at the DECC inspection has defected me for the cat because i dont have the compliance papers. 2nd hand owner here...

So I've been defected again for a compliance CAT!

I need some help from the good natured people on this forum, because the only one i can find the guy wants 850$ for. And i only need it for a day! Im not paying that for a cat most people throw away.

Anyway the part im looking for to get past this DECC test is as far as i know the Stock CAT for an R33 Series 2, or it also comes off a Nissan Maxima 1998 - 2001 models

The cat will have X3 or X5 stamped on the bottom of them. I can post up some pics tomorrow.

Does anyone have one for Sale, or will to let me borrow/rent for a few days, else my car gets de-registered....

Even if someone has the full exhaust system i will take that.

Call me on 0401016609, names Simon

Thanks :)

Link to comment
https://www.sau.com.au/forums/topic/300384-stock-cat-r33-s2-x3-or-x5/
Share on other sites

Yeah you won't believe this but I currently have a Stock Standard ADR approved compliance Catalytic converter on my R33 and when i went for the DECC inspection (i got defected for noise levels a while ago and sent to the decc) , the guy at the DECC inspection has defected me for the cat because i dont have the compliance papers. 2nd hand owner here...

So I've been defected again for a compliance CAT!

I need some help from the good natured people on this forum, because the only one i can find the guy wants 850$ for. And i only need it for a day! Im not paying that for a cat most people throw away.

Anyway the part im looking for to get past this DECC test is as far as i know the Stock CAT for an R33 Series 2, or it also comes off a Nissan Maxima 1998 - 2001 models

The cat will have X3 or X5 stamped on the bottom of them. I can post up some pics tomorrow.

Does anyone have one for Sale, or will to let me borrow/rent for a few days, else my car gets de-registered....

Even if someone has the full exhaust system i will take that.

Call me on 0401016609, names Simon

Thanks :cheers:

Simon,

Where are you located? I have the same problem, check my thread under NSW. I am getting an original cat tomorrow. You can have it after I pass the test. I know what pain you are going through.

Simon,

Where are you located? I have the same problem, check my thread under NSW. I am getting an original cat tomorrow. You can have it after I pass the test. I know what pain you are going through.

You guys just need a stock Cat from an r33?

Im pretty sure ive got one lying around. $50 plus postage if you want it. Coming from Brisbane.

Let me know and I'l Rummage through to find it and confirm for you that it has X3 or X5 on it (im at work- Cat should be at home).

PM me if interested.

Cheers

got a stock r33 ser2 cat if you want it. pm me or call 0421561681.. in gc qld

Hey guys, sorry no internet for the last couple days.

Um yes the cat was actually x4 and x5 stamped on it on the bottom (the mechanic is dyslexic apparently and told me it was x3, until off course i saw the photos and its clearly a 4), the X5 one looks more like a plate attached to the bottom of cat .

So yeah anyone with a DECC passed cat, i will take it.

The DECC guy in Cambpelltown who is apparently the best to go to has given me two photographs, it the cats dont look like one or the other, he wont pass em.

Will upload photos tomoz.

Will be PMing everyone who has replied here

i have a few adr approved compliance cats here is that what you require?? if so pm me they have flanges on the fo direct bolt in replacement

No they wont pass the ADR compliance cats, trust me i have one ont he car atm.

The DECC specifically want the original nissan parts that get taken off the car for compliance, i know it hard to understand but its the reality we seem to be faced with.

The cats have and X3, X4, X5, stamped on the bottom, some have a nissan stamp also.

If you have one that fits the above criteria PM me!

so basically they want you to return the cat to the "non adr approved" japanese version to pass a test am i getting this right?

That is correct, i have even called and spoken with the one guy responsible for approving these things at the DECC.

Greg somebody, and he is just painfully uncaring.

He will give you the following options

1. Use non standard cat and pass an RTA emmsions test

2. Get the non ADR original nissan CAT and get it passed DECC inspection

Believe me i tried to sort this out and get him to f**king see sense over this. Basically their reasoning is they can't trust mechanics or engineers or US. So unless you have compliance papers for your car, no deal. He even said if you get compliance papers now that youve been defected it wouldnt matter, you still have to go for an emmisions test again!

Good times

Pics of the required CATS

post-64617-1262044906_thumb.jpg

Those are the X4 and X5 cats, apparently an X3 is also passable but no photo of it.

Sorry for the horrid scans but the photos i was given are not the best quality.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...