Jump to content
SAU Community

Recommended Posts

I've read so much but still unsure what to get.

1. Either what brake discs fit, or where can i get a new standard disc for the RWD s2 stagea. (If its a nissan dealer approx how much and which one is best in melbourne?

2. What front pads and are the rs4 AWD. front pads the same as the rs RWD pads.

Hopefully someone out there can help...

Hey mate i understand your confusion as iam in the same boat :D hope i can shed some light for you.

As far as i can understand the S2 RS models front brake rotors are completely different to the RS4 and any other model for that matter, but i believe pads are the same.

You can get pads and rotors from nissan dealers, but your best bet would be from a website like Greenline.jp, RHDjapan, Nengun etc

eg. can get Dixcel rotors from Greenline for approx $370 delivered but i recommend you email them first to ensure they can supply you with the right parts, i have found that they are quite helpfull provided you give them the right information

I highly recommend getting your rotors on car machined if they have enough metal left, a much cheaper option then replacing.

As for pads they are a bit easier as they are the same as the RS4 and can be sourced locally. I got my set from GSL Rallysport in bris for $99 delivered. Not a bad pad, good feel and temp range but very and i mean VERY dusty. Talk to them i believe they have a few options for pads now.

GSL Rallysport can be found on this website see link below.

http://www.skylinesaustralia.com/forums/gs...port-m9479.html

Hope this all makes sense and helps you out, if any one else has information please feel free to share and correct me!

Regards

Chris

Mate! Thats a great help! Good to see im not the only one out there thats a little confused. I'll try and call some of those guys in the next few days.

Would any of them have any slotted rotors or am i pushing and should just stick with stock rotors?

Thanks again for the info!!!!

Not a problem dude!

Yeh they do list slotted rotors but they will be at a price!!, but like i said make sure u check with them that they are for the RS rwd model and make sure that they are aware that they are different to the RS4.

All the best dude. :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...