Jump to content
SAU Community

Recommended Posts

R32 GTR FOR SALE

THIS CAR IS IMMACULATE!!!!!VERY RARELY DRIVEN AND IN VERY CLEAN CONDITION INSIDE AND OUT...

I HAVE HAD THIS CAR ON THE DYNO.... TWO WHEELS AT OVER 360KW..... TRUST ME THIS CAR ABSOLUTELY GUNS IT. THE CAR HAS ROOM FOR MORE POWER AS I DECIDED NOT TO MAX IT OUT AFTER REBUILD. EBOOST CONTROL HAS 3 SETTINGS TO KEEP IT TAMED AROUND THE CITY.

I HAVE SPENT A HUGE AMOUNT OF MONEY ON THIS CAR IN THE 2 YEARS THAT I HAVE HAD IT AND RECENTLY COMPLETED A FULL ENGINE REBUILD......PARTS LISTED BELOW

APEXI POWER FC COMPUTER

ARGO H BEAM RODS

ACL FORGED PISTONS

ARP HEAD STUDS

TOMEI 260 PONCAMS

N1 OIL PUMP N1 WATER PUMP

R33 CRANK

GATES TIMING BELT

MLS METAL HEAD GASKET

2 X GARRETT 2860 TURBOS

EBOOST 2 CONTROL

TOMEI SUMP BAFFLE

Z32 AIRFLOW METRES

HEAVY DUTY CLUTCH WITH BRASS BUTTONED FLYWHEEL

SUSPENSION IS HKS FULLY ADJUSTABLE

CROSS DRILLED ROTORS ALL ROUND

HKS CAT BACK EXHAUST AND DUMP PIPES (SOUNDS AWESOME AND MEATY)

18" RIMS WITH NEW TYRES

THIS CAR DOESN'T NEED A SPENT CENT ON IT!!!!!I DID IT ALL

BENEFIT FROM MY MISFORTUNE ITS TIME FOR ME TO GO TO UNI AND FUNDS ARE NEEDED TO SUPPORT FAMILY WHILST STUDYING

THIS CAR HAS NEVER BEEN ON TRACK SINCE I IMPORTED INTO AUSTRALIA.....RARELY DRIVEN.JUST OVER 10000KM IN OVER 2 YEARS. OIL CHANGED EVERY 3 MONTHS WITH NEW ENGINE.

IF YOU WANT MORE PICS OR INFO PLEASE EMAIL ME

email me at [email protected]

Attached thumbnail(s)

Reduced 93%

2048 x 1536 (718.04K)

Reduced 93%

2048 x 1536 (664.11K)

Reduced 93%

2048 x 1536 (690.06K)

Reduced 93%

1536 x 2048 (674.42K)

Reduced 93%

2048 x 1536 (690.75K)

Reduced 93%

2048 x 1536 (719.31K)

Reduced 93%

2048 x 1536 (710.64K)

Reduced 93%

2048 x 1536 (673.41K)

Reduced 93%

2048 x 1536 (695.53K)

Reduced 93%

2048 x 1536 (707.93K)

Reduced 93%

2048 x 1536 (688.57K)

Reduced 93%

2048 x 1536 (679.63K)

Reduced 93%

2048 x 1536 (694.53K)

Reduced 93%

2048 x 1536 (549.65K)

Reduced 93%

2048 x 1536 (666.23K)

Reduced 93%

2048 x 1536 (694.24K)

Reduced 93%

2048 x 1536 (718.04K)

Reduced 93%

2048 x 1536 (704.85K)

Reduced 93%

2048 x 1536 (700.08K)

Reduced 93%

2048 x 1536 (704.26K)

Attached image(s)

Attached File(s)

Dyno_20001.pdf ( 844K ) Number of downloads: 24

post-40497-1264638812_thumb.jpg

post-40497-1264638835_thumb.jpg

post-40497-1264638854_thumb.jpg

post-40497-1264638876_thumb.jpg

post-40497-1264638902_thumb.jpg

post-40497-1264638925_thumb.jpg

post-40497-1264638944_thumb.jpg

post-40497-1264638978_thumb.jpg

post-40497-1264638995_thumb.jpg

post-40497-1264639012_thumb.jpg

post-40497-1264639044_thumb.jpg

post-40497-1264639055.jpg

post-40497-1264639074.jpg

post-40497-1264639088.jpg

post-40497-1264639109_thumb.jpg

post-40497-1264639137_thumb.jpg

post-40497-1264639157_thumb.jpg

post-40497-1264639181_thumb.jpg

Dyno_20001.pdf

Edited by GTRClintR32
Link to comment
https://www.sau.com.au/forums/topic/305778-r32-1994-gtr-must-sell/
Share on other sites

current kms? and price mate??

current KM's are just ticked over 80000km. Engine rebuilt about 6000km ago. I am looking at prices around mid 20's.....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...