Jump to content
SAU Community

Recommended Posts

92 s13 sr20det sil80 front damage Motor rebuilt by RE Customs in melbourne 25,000 kms ago. and re-tuned by power tune about 6 months ago and made a comfortable 280 rwkw on 20psi. Has potential for more. My mechanics told me bigger wastegate to hold more boost will make 300kw. clutch was just upgraded to cushion button. I've been told the front can be fixed but as i've already spent a fortune on will sell it the way it is....

MODS:

Venolia forged pistons

Eagle rods Metal head gasket

Brian crower heavy duty valve springs with titanium retainers Brian crower stage 2 cams, 264 degrees, 12.1mm lift

Greddy adjustable cam gears

Tomei rocker arm stoppers

Custom Exhaust manifold

Trust TD06 Turbo rebuilt 20,000 kms ago

38mm Turbo smart External gate with screamer pipe

Custom dump into kakimoto cat back exhaust, cat replaced with straight pipe

Greddy intake plenum

z32 airflow meter

apexi bov

apexi power fc computer with hand controller

apexi avcr boost controller

sard 700cc injectors

bosch 040 fuel pump

custom catch can

S14 gearbox

New cushion button clutch kit replaced 2,000 kms ago

K-Bee fully adjustable coil overs with pillow ball top mounts

Cusco front and rear strut braces

Grenade 17 x 9 Rear wheels 17 x 8.5 front wheels

Aluminium Drift pineapples,body kit custom bay side blue paint

sports steering wheel

razo pedals

jvc head unit, amp, subs, front speakers standard rear speakers

$10,000

call me for more details about damage etc Brett 0432657025

Edited by Slopo22
Link to comment
https://www.sau.com.au/forums/topic/305986-sil80-280rwkw-front-end-damage-nsw/
Share on other sites

SWAP CHECK TOPICS, CALL/SMS IF UR KEEN

Not interested in SWAPS getting out of import cars...

Car now on ebay you can see pics of damage there.. if not sold by end of this weekend will be parting it out...

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...