Jump to content
SAU Community

Recommended Posts

G'day,

Finally got around to clearing out my garage, lots of bits for S15s as well as stuff that will fit other models. Feel free to drop me a PM if you've got any questions. All items are much preferred to be picked up in Adelaide (~5kms north of the CBD) but smaller items can be posted at buyers cost.

Tein Control Master Type Flex Coilovers + EDFC to suit S15 - $2500

Features:

* 16 level damper adjustment (combined bump-rebound), soft is a bit firmer than stock, full-hard is

* full length and height adjustment, anywhere between slammed to the ground up to near-stock

* independant height and spring preload adjustment, so lowering doesn't stuff up your spring rates or travel

* pillow ball upper mounts with camber adjustment on fronts - dial up the the neg camber to fit your massive rims or corner hard on the track

These are in as-new condition and have done less than 1000kms on the car. These not only will make your car look fully sick, but handle brilliantly on the track too.

The EDFC in cabin controller allows you to adjust the ront and rear damper settings from the drivers seat, and is also guaranteed to impressed the ladies with your high-tech 'quipment (YMMV :D )

Price is firm and includes coilovers, EDFC, c-spanners and all full-length EDFC cabling, box and manuals.

post-63364-1264828891_thumb.jpg post-63364-1264828910_thumb.jpg post-63364-1264828954_thumb.jpg post-63364-1264828971_thumb.jpg post-63364-1264828988_thumb.jpg post-63364-1264829003_thumb.jpg post-63364-1264829030_thumb.jpg

Factory S15 tail-lights - $150

Mint condition. Good for compliance, crash-repair or for backup when you trash your old ones trying to smoke them with sick matt-black spraypaint

post-63364-1264829115_thumb.jpg post-63364-1264829130_thumb.jpg

Factory S15 airbox - $75

Original condition, complete with near-new factory-spec air filter. Not harcore in any way, but legal :D

post-63364-1264829166_thumb.jpg post-63364-1264829181_thumb.jpg

Factory S15 exhaust (cat-back ) - $100

In good condition as did only 30000kms on the car. It's oh so quiet… (and oh so legal). Only got pic of the muffler but the rest of the piping is in the shed.

post-63364-1264829337_thumb.jpg

Splitfire mechanical boost gauge - $30

Slightly orange backlight but can be changed by replacing bulb, or get the ultimate night-time stealth look by removing the bulb altogether! Fits perfectly in an S15 aircon vent.

post-63364-1264829362_thumb.jpg

Turbosmart boost controller $30

Manual bleed valve. Make the needle on your new splitfire boostgauge go nuts!

post-63364-1264829393_thumb.jpg

ROH Adrenalin 17" wheels - $350

Set of 4 17"x7" ROH Adrenalin wheels to suit S15 (no tyres). 2 are in good condition with a few minor nicks. The other two have enough gutter-rash to make your blind granny blush, but she will look fully sick chucking burnouts with these rims

post-63364-1264829424_thumb.jpg post-63364-1264829434_thumb.jpg post-63364-1264829447_thumb.jpg

S15 Factory 16" Alloys - $250

Set of 4 16"x6.5" S15 factory alloy wheels with no tyres. They are in reasonable nick but aren't mint - a few scrapes and scratches on one as you can see in the pics. Also note they are the real-man's original alloy, not the later playboy-bling chromed GT-spec items.

post-63364-1264829482_thumb.jpg post-63364-1264829492_thumb.jpg

do the edfc comes with motors and do u separate that with the tein coilovers

Hi,

the edfc has all cables and motors, but they are physically attached to the coilovers so I'd rather sell the whole lot as a kit (although i recognise this is SAU not NS so the S15 coils will not be of huge interest here).

Cheers

  • 2 months later...
  • 3 weeks later...

Coilovers: SOLD!

EDFC: kept for my new GTR Teins arriving soon!

S15 16x6.5 Rims and ROH 17x7 Adrenalins still for sale. Open to offers.

  • 4 months later...
ROH Adrenalin 17" wheels - $250

Set of 4 17"x7" ROH Adrenalin wheels to suit S15 (no tyres). 2 are in good condition with a few minor nicks. The other two have enough gutter-rash to make your blind granny blush, but she will look fully sick chucking burnouts with these rims

post-63364-1264829424_thumb.jpg post-63364-1264829434_thumb.jpg post-63364-1264829447_thumb.jpg

S15 Factory 16" Alloys - $150

Set of 4 16"x6.5" S15 factory alloy wheels with no tyres. They are in reasonable nick but aren't mint - a few scrapes and scratches on one as you can see in the pics. Also note they are the real-man's original alloy, not the later playboy-bling chromed GT-spec items.

post-63364-1264829482_thumb.jpg post-63364-1264829492_thumb.jpg

These are still for sale... so PRICE DROP!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...