Jump to content
SAU Community

Recommended Posts

here is the updated list of all the parts i have left to save confusion only the parts listed below are still available for sale and prices have also been lowered again

used current model silver hks turbo timer with loom to plug into r32 and 33/s13/s14/s15? $100 with loom in near new condition

used japanese made nismo boost guage with digital exhaust temperature in the middle an awesome guage with the little controller box an older type of guage i know the boost works fine but not sure about the egt as i never ever drove the car to see if it worked correctly but i know it did work as far as i tested it if that makes sense $120

enkei RP01 wheels 17x9 22 offset all round no tyres wheels are 110% straight as i have had these all tested with centre caps a few scratches would be awesome awesome light as fck wheels with some paint currently silver $950 no tyres

riverside/zepter wheels 3 piece forged polished 17x9.5 17 offset NO GUTTER MARKS NO SCRATCHES PERFECT 4 brand new 255/40 tyres new valvestems all fitted and balanced ready to go all centrecaps and wheelnut cover plates (even have a few spares) $1990 very tough lightweight wheels

may seperate tyres and sell wheels if the right offer is made

used hks pod filters and cast alloy adaptors and brackets to suit gtr $130

brand new alpine cd/mp3 headunit with usb capability CDA-9884E $250

free postage included in the asking price for most small items

please check my older topic for pictures if youre interested or i can try and email you pics if you request via pm... postage is no problem on smaller items happy to package larger items if you want to organise the freight yourself

located in toowoomba qld 1 hr west of brissy, cheers :P

Edited by WHITE R32
  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

here is the updated list of all the parts i have left to save confusion only the parts listed below are still available for sale and prices have also been lowered again

used current model silver hks turbo timer with loom to plug into r32 and 33/s13/s14/s15? $100 with loom in near new condition

used japanese made nismo boost guage with digital exhaust temperature in the middle an awesome guage with the little controller box an older type of guage i know the boost works fine but not sure about the egt as i never ever drove the car to see if it worked correctly but i know it did work as far as i tested it if that makes sense $120

pics please.

i have just found $700 bucks worth of receipts for some polish touch ups and repoilishing the caps and nuts and 2 new tyres valve stems fitting and balancing for the riverside wheels

tomek im working on your pics it seems my camera has a problem connecting to the pc at the moment... trying to get a new cable

Edited by WHITE R32

here are the pics i had on my pc... not great pics but u get the idea

if anyone is seriously interested once i sort my camera i can take more new pics of each wheel for you etc

post-1868-1266062219_thumb.jpg

post-1868-1266062229_thumb.jpg

post-1868-1266062236_thumb.jpg

post-1868-1266062260_thumb.jpg

below are the only parts i have left i have adjusted the prices on a few also

used japanese made nismo boost guage with digital exhaust temperature in the middle an awesome guage with the little controller box an older type of guage i know the boost works fine but not sure about the egt as i never ever drove the car to see if it worked correctly but i know it did work as far as i tested it if that makes sense $120

enkei RP01 wheels 17x9 22 offset all round no tyres wheels are 110% straight as i have had these all tested with centre caps a few scratches would be awesome awesome light as fck wheels with some paint currently silver $900 no tyres

riverside/zepter wheels 3 piece forged polished 17x9.5 17 offset NO GUTTER MARKS NO SCRATCHES PERFECT 4 brand new 255/40 tyres new valvestems all fitted and balanced ready to go all centrecaps and wheelnut cover plates (even have a few spares) $1890 very tough lightweight wheels

may seperate tyres and sell wheels if the right offer is made

used hks pod filters and cast alloy adaptors and brackets to suit gtr $130

brand new alpine cd/mp3 headunit with usb capability CDA-9884E $240

  • 2 weeks later...

ive tried finding that gauge for you but its in my spare parts gtr somewhere and its jammes up the side of the shed so i cant get the doors open...ill try and make my way in through the boot once i get a chance, sorry

  • 2 weeks later...

on a gtst theyd sit roughly level with the guards and fill them right out for a tough stance... trial fitting is fine though

i havent had these fitted to my own car...

but use this tool to calculate where they will sit on your car http://www.1010tires.com/WheelOffsetCalculator.asp

we sat them on a s13 for fun one day and they were basically level with the guards with what was essentially factory camber dialed into it front and rear

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
    • The video for the servicing and fuel filter change can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44 One of the main jobs I wanted to do before the car officially went on the road, was to remove the awful looking blue silicone hoses. There's nothing wrong with having coloured silicone hoses, but I realise as I'm getting older I prefer monotone engine bays with a splash of colour on the engine cover(s). I cover this in a lot more detail in the Youtube video, so unfortunately there's limited photos of the process. The intercooler, upper radiator, boost vacuum and upper breather hoses were all changed to black silicone with mikalor clamps. The only blue left is a blanking cap at the back of the inlet manifold and the GReddy pulleys (which will be replaced for stock when the cambelt gets replaced) While the intercooler pipes were off I gave them a quick clean/polish too A before photo I do have a replacement air filter on its way. Fuse box covers were painted blue, they're now satin black Another job on the list while the bumper was off, is to add some mesh https://live.staticflickr.com/65535/54737966256_99b28bfa30_c.jpg[/img] I was hoping to use some thin wire to secure it, but it seems I've misplaced it and the wire I had was too thick to twist easily. I ended up using cable ties for the time being https://live.staticflickr.com/65535/54737131882_c2b7989dcc_c.jpg[/img] Was pleasant to see this https://live.staticflickr.com/65535/54737131627_8b2aab13b3_c.jpg[/img] The last thing to do was to fix the front grill and re-mesh that to match but I ran out of time The Youtube video can be seen here: https://www.youtube.com/watch?v=R4FsF6tgizE&t=23s
    • Hi all,I already introduced myself in the Victoria section, but only saw this section now lol XD New to forums and new to skylines. Hoping to buy my new skyline within October
×
×
  • Create New...