Jump to content
SAU Community

Recommended Posts

Forsale

Black lenso 17's 4x114.3 comes with spacers. $700

To4e turbo had it on car no problems minimal shaft play came on hard. $300

S13 cusco coilovers $200

Rb20 silvertop turbo good condition comes with mani, 3inch dump pipe, induction hose ready to go $400

Rb20 silvertop injectors $100

Rb20 AFM green lable $80

Turbosmart Vee-port BOV $100

R31 handbrake assembly $100

Import struts comes with control arms, disk, calipers, springs, hubs all bolts $500

ALL ITEMS IN GOOD CONDITION

Pm me. Parts located in sydney inner west can post small items

Pictures will be up tonight.

Link to comment
https://www.sau.com.au/forums/topic/306819-r31-rb20-rb25-wheels-coilovers/
Share on other sites

Forsale

Black lenso 17's 4x114.3 comes with spacers. $700

To4e turbo had it on car no problems minimal shaft play came on hard. $300

S13 cusco coilovers $200

Rb20 silvertop turbo good condition comes with mani, 3inch dump pipe, induction hose ready to go $400

Rb20 silvertop injectors $100

Rb20 AFM green lable $80

Turbosmart Vee-port BOV $100

R31 handbrake assembly $100

Import struts comes with control arms, disk, calipers, springs, hubs all bolts $500

ALL ITEMS IN GOOD CONDITION

Pm me. Parts located in sydney inner west can post small items

Pictures will be up tonight.

post-67045-1265274729_thumb.jpg

post-67045-1265274741_thumb.jpg

post-67045-1265274750_thumb.jpg

post-67045-1265274760_thumb.jpg

post-67045-1265274771_thumb.jpg

post-67045-1265274783_thumb.jpg

post-67045-1265274802_thumb.jpg

Also i have a koya drifttek rim in black 5x114.3 good nick without tyre $200 or swap for same rim but in 4x114.3

Edited by mattie09
hey mate basically bolt it to the flange, block coolant lines, reconect oil sup. oil drain. n Vband clamp it up, i gave a few spare clamps around u can have.
Forsale

Black lenso 17's 4x114.3 comes with spacers. $700

To4e turbo had it on car no problems minimal shaft play came on hard. $300

S13 cusco coilovers $200

Rb20 silvertop turbo good condition comes with mani, 3inch dump pipe, induction hose ready to go $400

Rb20 silvertop injectors $100

Rb20 AFM green lable $80

Turbosmart Vee-port BOV $100

R31 handbrake assembly $100

Import struts comes with control arms, disk, calipers, springs, hubs all bolts $500

R31 front and rear struts with pedders springs, disk and calipers new pads allround, control arms with new bushes $250

ALL ITEMS IN GOOD CONDITION

Pm me. Parts located in sydney inner west can post small items

Pictures will be up tonight.

hey mate The comp. inlet measures 65mm the turbo has no markings on it. but the housings are big had it on a rb20 came on spastic 2nd 3rd 4th.

  • 3 weeks later...
  • 3 weeks later...
  • 3 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...