Jump to content
SAU Community

Cruise Friday Febuary 19th - Emerald To Mt Everlyn & Mount Dandenong Tourist Rd


Recommended Posts

When?

Friday Febuary 19th

8:30pm meet for an 9:30pm departure.

Where?

Initial meetpoint: Stamford hotel. Corner of wellington Rd & Stud rd, Rowville.

Destination:

Emerald to Mt Everlyn then back down to Mount Dandenong Tourist Rd

Route:

Maps will be provided

Distance:

Roughly 70km

What to bring:

- 1x car

- Petrol (at least 1/2 tank to be safe)

- Money for food

- CB radio (optional)

- Camera (optional)

Are any cars welcome? Its just my GTR is with the machanics getting tuned up and am driving a commodore at the moment. It sounds great and really want to come. Cheers

Guest
This topic is now closed to further replies.


  • Latest Posts

    • 21 is explicitly the coils detected as the issue. Is it guaranteed the actual issue? No. Just the ECU thinks it is. When you say rattling, describe it better, get an audio clip as best you can if possible.
    • Yea got me coppers. Bad news is I just put them in and the car still has the light and shakes. I also noticed I hear like rattling coming from the exhaust piping right under me. Does 21 also have a possibility of being O2 sensors?   So, coil packs are good, the harness is good, the MAF is working, and obviously the spark plugs just replaced and working.
    • Make sure you drop the GTT base tune back in, and set your injectors again, this will remove anything playing up with it you may have removed. Possibly lean there as it's normally a fast transient going THROUGH atmospheric pressure, and a turbo motor would then quickly go richer as boost builds. The only worry you MIGHT have is ignition timing, as the DE is higher compression than the DET from memory. But again, you're not in boost, so the DE motor will be a lot more forgiving at atmospheric.   Get Murray, Kinkstahs, and Johnny's input on tuning haltechs, those guys have played with tuning enough in the past to be able to help now you're past the trouble shooting stage of the MAP issue
    • @Rusty NutshI mate. Do you have a pinout diagram for the na neo auto ecu? 
    • Yeah thats the plan now. 🤞
×
×
  • Create New...