Jump to content
SAU Community

Sydney: '94 200sx S14 For Sale


Recommended Posts

Hi,

I have a '94 Australian-delivered 200SX for sale.

I've only owned this car for a few months now,but due to changing road conditions in my area,and an upcoming employment change,I'm now looking to sell the car.

The car was originally an automatic,and was converted to manual before I bought it.

It's is a mid-spec (sports) model,and has had most of the luxury spec model's parts fitted such as the factory fog lamps and front bumper lip.

Distance travelled on the odometer is ~121,000km.

Colour is Emerald green.

The parts list of what I've fitted to the car since I bought it is as follows:

Personal steering wheel on HKB boss kit with adj. spacer,Pod filter on HKS adapter,Nismo oil cap,Factory luxury lip,ebay special front strut brace,Just jap camber arms,radius rods,traction rods,toe control arms,front and rear sway bars,Tein tie rods and ends,Tein adj. camber tops,clear front indicators and crystal park lights,LED globes in no. plate lights and park lights,JDM fog lamps and factory switch stalk,JDM silvia floor mats,Clear h'lamp lenses onto JDM lights,R32GTR front callipers w/DBA 4000series discs and DS2500 ferodo pads,TRW rear pads,CES split dump pipe,X force 3" metal cat,Fujitsubo cat-back exhaust.

Shocks are pedders and koni,with kings springs. Side skirts and rear pods are unknown,possibly Edge copies.

The car has had an FMIC in it previous to when I bought it,it's currently fitted with an S15 SMIC.

Some other interesting parts I have on hand but have not been fitted to the car as of yet,and can be negotiated into the sale for an extra cost:

S14A JDM factory aero rear wing,JDM rear bumper,Greddy hard intake pipe,Alloy subframe locking collars,Aluminium underdrive pulleys,a buddy club copy front bumper lip and a brand new power fc and commander.

I also have a few spare std parts which can go with the car for no extra cost such as headlights,park lights,control arms,A damaged SR20DET and such. I'll throw in whatever I can dig up in my garage that is for an S14.

The bad parts:

*The sunroof on the vehicle is not in good order. I was planning to remove it's mechanism and seal up the panel but have not had time to do this as of yet. the roof does open and close,but the mechanism is damaged and is not smooth to operate.

*The spiral cable is broken. a horn button was fitted on the column surround by the previous owner.

*The body condition reflects the car's age. it's not a show car,and has a few marks and small dings. Nothing terrible,just what you'd expect from a '94 model that's likely spent most of it's life parked on the street.

Asking price is $7000,which can be negotiated up or down depending on parts removed,or added to on top of what's currently on the car. I am a licensed mechanic and can fit any of the parts on the list above for a small fee if desired.

Lowballers will be banned. I have NO tolerance for bullshit atm. I've been totally honest about the car,and I expect to not be forced to suffer stupidity to make a sale.

The price will NOT be lowered any further without parts coming off of the car.

If you're not genuine about wanting to buy the car,don't bother contacting me. I will not sell it to you for $5k because your uncle's nephew's cousin's former roommate saw one last weekend for that price,so don't even try that crap.

I AM negotiable,but don't expect a massive price drop just for the sake of it.

I'm not interested in sawps,or shipping the car interstate unless there's cash put down up front.

Car is located in Sydney's eastern suburbs.

If you're interested,please let me know,

Justin...

frontka.jpg

img1189e.jpg

rearqy.jpg

img1191as.jpg

img1183h.jpg

img1184a.jpg

img1185k.jpg

img1196if.jpg

Link to comment
Share on other sites

  • 2 weeks later...

Hey mate, Great looking car for the price makes me wish i didnt just buy my s14 for what i did...

It says in your post you have some parts not fitted to the car.

Would you be interested in selling the JDM Rear bumper? Name your price + pic if possible.

Im located in queensland so id have to get it shipped up at my cost, no problem.

Hope your sale goes well.

Regards, Nick

Link to comment
Share on other sites

Hey mate, Great looking car for the price makes me wish i didnt just buy my s14 for what i did...

It says in your post you have some parts not fitted to the car.

Would you be interested in selling the JDM Rear bumper? Name your price + pic if possible.

Im located in queensland so id have to get it shipped up at my cost, no problem.

Hope your sale goes well.

Regards, Nick

Hi Nick,

I'm happy to sell anything listed that's not already fitted to the car. I'd want $200 for the JDM bar. it's currently red and is in good condition,bar a few screw holes on the underside from where it had rear pods attached to it by the previous owner. nothing that you couldn't weld/putty up when respraying it to suit your car.

Pm me if you're interested and I'll give you details for courier pickup and bank deposit.

Justin...

Link to comment
Share on other sites

The guy who's coming tomorrow sounds pretty keen,but then,so did the previous guy who looked at it last week and then worked out that he couldn't afford it,and there have been two others who made appointments to come see it,and then didn't show up. :thumbsup:

There are 7 people watching it on ebay,so who knows?

Best bet would be to either get in early tomorrow,or to wait and see what happens tomorrow night and either pm or call me after 8.30pm. I will know by then if it'll still be available or not.

Justin...

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Go to SP mufflers and get the muffler of size you want and make a nice mid muffler. It's about that simple! I have 2x 3.5 Magnaflow straight through Mufflers and while it's pretty loud with the Varex open, it's quiet enough with the Varex closed. You can also buy off the shelf Magnaflow straight through mufflers as well. You also have a turbo to quiet the car down too. Don't overthink it. Buy my extra Magnaflow muffler sitting on a shelf doing nothing (buy it new, ignore this part)
    • Centre-offset muffler under the floor, same as stock. Just....3.5". The change from straight pipe there to centre-offset will mean that you need to remake some of the pipe (add a bend or two).
    • Hey guys. So my R34 GTT has a custom 3.5” exhaust (done by previous owner) with a high flowing cat, and then just a Varex cannon muffler on the back. The car does drone alot and is really loud even on highway driving just cruising, as you can imagine due to the Varex muffler basically being a straight through with the valve open. As much as i love a loud RB, it can be a bit much with no other muffling in line and just driving casually. I wanted to lower the volume output on the exhaust a bit, as well as remove the drone (probably a way to do both at once), and was going to do it all myself as I am a fabricator and have done exhaust work in the past, so the fab work isnt my issue, im just not sure on the right product or type of product to use to get the job done, and i doubt an exhaust shop would be wanting to help me as they wont be making any money from helping me, unless they supplied the product? Anyway any help or guidance in best way to approach this would be awesome   Thanks in advance
    • Meh, whilst the Honda is a "really" good car and has potential if you want to drop coin on, it was uninspiring for me to look at, but, it did serve its purpose and is now in the boys hands, his happy, his girl is happy, as she wasn't to keen on the noisy old Patrol, and most importantly, the Minister for War and Finances is extremely happy that her "little baby boy" (6'2 nugget who is currently training to be a copper, which will make 3 coppers in the immediate "circle of trust") has a well sorted reliable car that doesn't guzzle diesel Me, I'm more than happy with the NC MX5 that I replaced it with, it's a fun little car that I like looking at, like driving, and yes..... I do like the fact that the maintenance and modifications that I have done/will do are plentiful and relatively cheap, well........ while staying naturally aspirated slow that is, and that's all I really need for a fun little daily, I can rev the 5hit out of it rowing through the gears and never really break the speed limit  In saying that wicked word, "modifications", I've already ordered something for some noise and an additional "3 ish" horse powers, or whatever it gives, in the form of a header, and, a new set of "cheapo" BC coilovers that are already sitting in the shed waiting to get put in, I had the same BC's in my old NB and found they were fine for the street, hwy, and the occasional track days I did in it, they have 6kg front and 4kg rear springs which is about 10% stiffer than the stock springs which I found worked well for their price  I've also already been in touch with MX5 Mania in Dural, so once the header is on it will get a ECUTek RaceROM tune there (I cannot rev match for 5hit, and I loved the RaceROM rev match and FFS in my old 86 "RIP") In other, maintenance news, I put some new sparkler plugs in it, and have a new set of DBA Street series pads to put in over the next day or so, I'm running the DBA street series in the SS and Honda and really like them, they work great and are not dusty at all I've also booked in a few days leave over this weekend to give me 4 days weekend do some paint correction and give the leather seats some conditioning and interior some Bissell and steam cleaning OCD lovin', the carpet and interior looks clean, but from my experience with the Bissell IRT carpet, and the steam cleaner IRT trim, looks can be deceiving I've also found that finding a detachable hard top is proving problematic, the main reason why I didn't like the NC initially was the power retractable hard top that I seen them with gave the roof line a weird look, the detachable roof though looks good, and is a same shape as a NA/NB hard top, similar, but unfortunately not the same as it has different fixture point on the front, so fitting a easy to get NA/NB detachable hard top is no bueno New Old cars are fun, cleaning, hunting and playing around brings much joy How are your beasties going? Do you still have the Skyline with the LS???, or Barra??? that you were playing with
×
×
  • Create New...