Jump to content
SAU Community

Recommended Posts

hey peoples .

got my s14 not 2 long ago , wanna change the rims on it for a set of 18inch drift teks

goin for the black on black look .

these rims are in very good condition , no buckles or gutter rashes etc etc .

the fronts have 90something percent tread on it and are 235/35/19

and the rears have a decent amount of camber wear , 275/30/19

looking for around the 1400 dollar mark .ono.

not sure on the offset , but they sit pretty tanky on my s14

if any1 has a set of black drift teks and want to swap or sell let me know .

located in syd

Link to comment
https://www.sau.com.au/forums/topic/310133-19-starcrops-5stud-immac/
Share on other sites

i think they do man , ill have 2 double check also

4 some reason every time i try uploading the pics here , it says not permited 2 upload this kind of file , how do i turn a file in to a jpeg to post it any1 no?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
    • Yeah - I mean, go the other way. Smaller range. Not larger.
×
×
  • Create New...