Jump to content
SAU Community

Recommended Posts

Hi guys and girls,

I have decided to put my car up for sale. Really don't want to but I know it will end up being a money pit in the future.

Specifications are as follows:

Yellow 2001 Australian delivered Nissan 200sx S15 Spec R

6 speed manual

Factory sun roof

Factory 1 piece side skirts

106XXX KM

Rego until 2 Oct 2010

Modifications currently fitted on the car include:

HSD HR coilovers

JDM S15 steering wheel

Standard S15 Stock wheels with 205/60/16 Dunlop DZ101

Apex?i boost guage

GReddy turbo timer

GFB Mach 1 blow off valve

Xforce front pipe

JASMA Complianced cat back

K&N Pod with HiOctane Racing box

15% tint

Add $1000 more for everything below:

R32 GT-R wheels with 225/50/16 Bridgestone Adrenalines ($500)

Whiteline front strut brace ($70)

Cusco 40D rear strut brace ($100)

NEW D-Project rear camber arms ($200)

Primered Replica S15 rear aero pods ($200)

JJR 15mm hubcentric bolt on spacers ($100)

Notes:

Last year the car was dyno?d at 163rwkw with just the pod and catback.

I have taken the car to the track twice since I?ve owned it but it hasn?t been thrashed to the limit as I short shift at approx 6000rpm.

On the rear bar, there is a bit of paint missing cause by someone scrapping it on the way past.

I am certain the car has been resprayed at one point in the past so this yellow will look a bit more vibrant than the factory lightning yellow.

No VCT on a cold start at all.

Price is $23,000 FIRM but if you are genuinely interested we can negotiate a deal that both parties will be happy on. If you do find a better deal, then buy it!

NO TEST PILOTS. NO TYRE KICKERS. NO TIME WASTERS.

TEST DRIVE REQUIRES DEPOSIT

I can be contacted via PM or phone (XXXXXXXXX)

Kevin

IMG_0884s.jpg

IMG_0886s.jpg

3879875541_f882ed5397_b.jpg

4389290832_53bb95c7be_b.jpg

Interior shot later.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...