Jump to content
SAU Community

Recommended Posts

hi there guys and girls , im new to the site but not new to the R31 as i have owned mine for 7yrs or so now , its not in th best shape but its rd worthy and just needs some TLC and $$ thrown at it ... A work in progress you might say lmao

INFO:

89 Series 3 Sillo Sedan

5 spd manual

Mini spool in the diff 3.89 ratio gearset

Lowered KING SPRINGS front and rear

15" mags from a nissan silvia which bolted on no worries as i was sick of the ugly lookin stndrd skyline wheels lol

Pod filter and modified induction system with extractors and a full 3" mandrel bent mild steel exhaust with highflow cat and cannon in the rear , mot a muffler of hotdog insite and the growl is quite prominent lol

15.79 is the ET at the drags on a 500k+ motor thats not too bad i guess with 2 gears of wheel spin

Looking at putting in a turbo N/A motor that i am collecting the parts for as we speak , so far i have the to4e turbo , highmount stainless manifold , 50mm wastegate and a haltech E6X EMS , need to get the injectors/fmic/head gasket and the various hoses and fittings to do the job , i have a spare motor that i am going to put the bits and pieces on b4 i swap it into the car , hoping to get 750cc injectors and run 14lb boost and i would like a modest 300hp at the rear wheels which shoud make for 13sec ET at the drags ....

anyhow here is the link to my car if you wanna have a look , as i said shes not too pretty and the paint has been through the wars but rome wasnt built in a day :D

http://s791.photobucket.com/albums/yy197/f.../R31%20Skyline/

Link to comment
https://www.sau.com.au/forums/topic/310493-newbie-to-the-site-from-tville/
Share on other sites

nice,

dont ever paint it.

an awesome sleeper!!

first off id like to say welocme to SAU qld ;-)

mud is right i think after ya done the mods you will have a nice lil sleeper but i think you might be selling ya self a bit short when ya said 300hp , im runnin somthin very simler to you in my r33 . i got t04e on modifide hiflow manifold , 750cc injecters and running 35mm external gate thats been plumed right back to the bend ( for better flow ) and with a good tune and my safc2 dialed in right i got 400 rwhp

neway good luck with it

cheers ...... ;-)

mud to be honest i wasnt going to paint it anything flash , just rub back the clear coat and redo that and straighten panels and just get it looking as "normal" as i could so yeah the thought for sleepa is there as i dont wanna advertise to the boys in blue that i have something fun to drive ya know lol

quick33 i might be selling myself short but im also looking at the fact i have an N/A motor and dont wanna wring its neck just yet , if i get a bigger power rating than i'm quoting that would be awesome , the kit i have is a no brand setup not a garret or anything like that but hell when its finished i know it will be a hell of a ride specially with a locked diff and the rain we get here hmmm , i dont thinkill drive it in the wet as ill loose the little bit of plastic in my wallet for sure as im a wet drifter at heart lmao , im from darwin and we had wet or dry conditions so the learning was there for wet drifting , it was a good place to start as i have never driven anything with power besides he V8 holden when i was 17 hehe

anyways guys thanks for the welcome to the site and hope to talk to a few more of you again soon

cheers festa

Hey mate, long time reader first time poster here.

Nice car, i have always had a soft spot for silo's a mate had a nice one with a 20 years ago.. good times!

E6X hey, let me know if you need any wiring troubleshooting or tuning done.

PS: Townsvillian too.

Edited by Jason Broadhurst

hey guys im in townsville aswell and i have some cntacts on parts if you are chasing them and festa bud if you would like a really good set of tail lights bud let me know as i race an r31 in the local motorsports clubs and they are a weapon but im also trying to sell my r32 as i have like 3 skylines now and i think its time to downsize so to speak so if you guys are intereested in parts or tuning feel free to message me

  • 2 weeks later...

hey jason , just got back on the site after not having the net for a little , anyways yeah i will need help when wiring up the haltech so any help would be great , i have a vl wiring loom with the computer harness already wired into it , has injector clips ready to push onto them and i think the o2 sensor with it also , im not sure if i hav to get rid of the origional computer and just use this but im sure you might be able to help with this also , [email protected] is my msn if you wanna add me so we can chat on there

cheers sean

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
    • On the bright side, the weather will turn much nicer for working outside shortly....sounds like you might need to start on a neighbour's garden next
    • Ok so i will NEED to have this sensor anyway even with Nistune (or standalone ECU) https://justjap.com/products/genuine-nissan-boost-pressure-sensor-evap-control-system-fits-nissan-r34-skyline-c34-nm35-stagea-pnt30-x-trail-rb25det-vq25det-sr20vet?currency=AUD&srsltid=AfmBOoqfxX48bW9bEwH62orcNhtBfp7ekAL0C9Ca89ySFGUiBzXfXeze Is this the correct one? And this is only thing i need? No other "things" connected to the sensor or something? I do have the wiring.
×
×
  • Create New...