Jump to content
SAU Community

Recommended Posts

Hi All,

Unfortunatly the time has come for me to part ways with my pride and joy. This is my R32 GTR Built Nov92.

Superb condition for age with only 84,000kms and has to be seen in the flesh as my photographic skills in no way do it justice.

I had the 100,000kms service done (inc timing belt and platinum plugs) at 80,000kms shortly after i bought the car so no major service required for a long time.

Rego Until Dec 2010. I have owened the car for a little over 2 years now and has always put a grin on my face.

The car is always garaged and barely even sees a rainy day. Car is not a daily drive and is only driven maybe once a week if i'm lucky. Hope somebody else can enjoy it on a more regular basis!

Asking Price : $23,990.00 OVNO

post-30565-1267705805_thumb.jpgpost-30565-1267705817_thumb.jpg

post-30565-1267705829_thumb.jpgpost-30565-1267705853_thumb.jpg

post-30565-1267703415_thumb.jpgpost-30565-1267703737_thumb.jpg

post-30565-1267703749_thumb.jpgpost-30565-1267703802_thumb.jpg

post-30565-1267703730_thumb.jpgpost-30565-1267707179_thumb.jpg

This car is very close to the original spec with only a few very tasteful mods. It was recently tuned at Unique Autosports in Sydney and made a respectable 233AWKW

Mods include Blitz Turbo timer and boost control running 1bar of boost. A 3.5" cat back exhaust system and Apexi power intake filter kit. Nismo 320kph Dash.

Wheels are 19"x10" Lenso DC-5's in copper bronze and really set the car off!

The car has never been thrashed, drifted or dragged and i've still got all my points to prove it!

Car also incudes a DVD/CD sound system using a double din JVC head deck (USB&DivX Support),

MB Quart Reference Splits in front doors, ($900 per pair)

MB Quart Basic Splits on Parcel Shelf,

12" JL Audio Sub in Sealed Enclosure,

1 4 x 100w Crossfire Amp for front and rear splits,

1 Bridged Crossfire Amp @ 400w for subwoofer.

I was very much going for sound quality not sheer volume!

The car is fully protected by an Alarm including Immobilizer (works with turbo timer,) proximity sensors, noise sensors and tilt sensors to protect wheels.

Any questions please private message me or send your contact number and i'll call or write back to you ASAP.

Thanks.

Edited by R32_Bob
Link to comment
https://www.sau.com.au/forums/topic/310698-white-r32-gtr-for-sale-sydney/
Share on other sites

Hi All,

Unfortunatly the time has come for me to part ways with my pride and joy. This is my R32 GTR Built Nov92.

Superb condition for age with only 84,000kms and has to be seen in the flesh as my photographic skills in no way do it justice.

I had the 100,000kms service done (inc timing belt and platinum plugs) at 80,000kms shortly after i bought the car so no major service required for a long time.

Rego Until Dec 2010. I have owened the car for a little over 2 years now and has always put a grin on my face.

The car is always garaged and barely even sees a rainy day. Car is not a daily drive and is only driven maybe once a week if i'm lucky. Hope somebody else can enjoy it on a more regular basis!

Asking Price : $23,990.00 OVNO

post-30565-1267705805_thumb.jpgpost-30565-1267705817_thumb.jpg

post-30565-1267705829_thumb.jpgpost-30565-1267705853_thumb.jpg

post-30565-1267703415_thumb.jpgpost-30565-1267703737_thumb.jpg

post-30565-1267703749_thumb.jpgpost-30565-1267703802_thumb.jpg

post-30565-1267703730_thumb.jpgpost-30565-1267707179_thumb.jpg

This car is very close to the original spec with only a few very tasteful mods. It was recently tuned at Unique Autosports in Sydney and made a respectable 233AWKW

Mods include Blitz Turbo timer and boost control running 1bar of boost. A 3.5" cat back exhaust system and Apexi power intake filter kit. Nismo 320kph Dash.

Wheels are 19"x10" Lenso DC-5's in copper bronze and really set the car off!

The car has never been thrashed, drifted or dragged and i've still got all my points to prove it!

Car also incudes a DVD/CD sound system using a double din JVC head deck (USB&DivX Support),

MB Quart Reference Splits in front doors, ($900 per pair)

MB Quart Basic Splits on Parcel Shelf,

12" JL Audio Sub in Sealed Enclosure,

1 4 x 100w Crossfire Amp for front and rear splits,

1 Bridged Crossfire Amp @ 400w for subwoofer.

I was very much going for sound quality not sheer volume!

The car is fully protected by an Alarm including Immobilizer (works with turbo timer,) proximity sensors, noise sensors and tilt sensors to protect wheels.

Any questions please private message me or send your contact number and i'll call or write back to you ASAP.

Thanks.

You can call me on 0404 986 863 for any offers you may wish to make for the car. Am quite keen to sell so try me you might be in luck.

Price drop Will take $22,000. I don't wanna have to trade my car in as i know that i won't get what its worth. This is such a good clean and reliable car that i'd much prefer an enthusiast to enjoy it than to see it on the forecourt at a car yard!

Just adding a few extra pics as requested, some of the shots aren't the greatest as my wife's out of state with the camera so these are from the trusty mobile phone!

If you have any questions you can call me on 0404 986 863.

Price $ 22,000

post-30565-1267877312_thumb.jpgpost-30565-1267877318_thumb.jpg

post-30565-1267877330_thumb.jpgpost-30565-1267877339_thumb.jpg

post-30565-1267877348_thumb.jpgpost-30565-1267877359_thumb.jpg

post-30565-1267877365_thumb.jpgpost-30565-1267877369_thumb.jpg

post-30565-1267877376_thumb.jpgpost-30565-1267877384_thumb.jpg

post-30565-1267877389_thumb.jpgpost-30565-1267877394_thumb.jpg

post-30565-1267877402_thumb.jpgpost-30565-1267877415_thumb.jpg

post-30565-1267877323_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...