Jump to content
SAU Community

R33 Parts: Bilstein Rear Shocks, Jjr S2 Coilpacks, Vgc S2 Seats, Boost+ Oil Temp Gauges+ A Pillar Pod, H1 Hid Kit, Amp+ Sub, Boost Controller [syd]


Recommended Posts

I have the following items for sale, selling these as I've sold the car, PM me if you're interested:

Bilstein R33 rear shocks -$180

Costs $600 new for the pair, only used for $5000km, no scores on the shaft, in good condition

JJR RB25DET coilpacks for Series 2 models- $150

In perfect working condition

R33 S2 Seats in very good condition -$180

Good condition, driver's seat have no tear like most other series 2 seats have.

Will not seperate, pick up only

Autometer Boost+ Oil temp Gauges+ A pillar pod -$100

Carbon look A pillar pod, Fits on R33 A pillar perfectly, doesn't include oil temp sensor but you will be able to order it seperately from autometer.

H1 HID kit - $90

As new condition, only test fitted, works perfectly fine, never bothered installing it before car was sold

Clarion Monoblock amp+ Sony subwoofer VGC- $150

Fits in R33 boot just fine, pick up only

Turbosmart dual stage boost controller- $60

Dual stage switch included

Edited by chiksluvit
I have the following items for sale, selling these as I've sold the car, PM me if you're interested:

Bilstein R33 rear shocks -$180

Costs $600 new for the pair, only used for $5000km, no scores on the shaft, in good condition

JJR RB25DET coilpacks for Series 2 models- $150

In perfect working condition

R33 S2 Seats in very good condition -$180

Good condition, driver's seat have no tear like most other series 2 seats have.

Will not seperate, pick up only

Autometer Boost+ Oil temp Gauges+ A pillar pod -$100

Carbon look A pillar pod, Fits on R33 A pillar perfectly, doesn't include oil temp sensor but you will be able to order it seperately from autometer.

H1 HID kit - $90

As new condition, only test fitted, works perfectly fine, never bothered installing it before car was sold

Clarion Monoblock amp+ Sony subwoofer VGC- $150

Fits in R33 boot just fine, pick up only

Turbosmart dual stage boost controller- $60

Dual stage switch included

shotty coilpacks

Hey mate ill take those coil packs pm me your details and ill transfer the money asap.

Regards

Chris

Just comfirming that these are for series 2? I cant seem to find a listing for these on the Just jap web site.

Chris

Yes they are definitely for series 2, it was pulled out of a series 2 R33, and i think it maybe the same as R34? Its for RB25 that has no ignition module on the spark plug cover

items that are currently available:

Bilstein R33 rear shocks -$180

Costs $600 new for the pair, only used for $5000km, no scores on the shaft, in good condition

R33 S2 Seats in very good condition -$180

Good condition, driver's seat have no tear like most other series 2 seats have.

Will not seperate, pick up only

Autometer Boost+ Oil temp Gauges+ A pillar pod -$100

Carbon look A pillar pod, Fits on R33 A pillar perfectly, doesn't include oil temp sensor but you will be able to order it seperately from autometer.

Clarion Monoblock amp+ Sony subwoofer VGC- $150

Fits in R33 boot just fine, pick up only

Turbosmart dual stage boost controller- $60

Dual stage switch included

an Xforce hi flow cat will be available this weekend

Edited by chiksluvit

Boost controller sold

what's left:

R33 Rear strut brace- $90

Bilstein R33 rear shocks -$180

Costs $600 new for the pair, only used for $5000km, no scores on the shaft, in good condition

R33 S2 Seats in very good condition -$180

Good condition, driver's seat have no tear like most other series 2 seats have.

Will not seperate, pick up only

Autometer Boost+ Oil temp Gauges+ A pillar pod -$100

Carbon look A pillar pod, Fits on R33 A pillar perfectly, doesn't include oil temp sensor but you will be able to order it seperately from autometer.

Clarion Monoblock amp+ Sony subwoofer VGC- $150

Fits in R33 boot just fine, pick up only

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...