Jump to content
SAU Community

Fs: Random Bits

G0DZLR
 Share

Recommended Posts

G0DZLR Mentor

G0DZLR

Posted
Posted

have got a few items up for sale, some are damaged

- R33 rear reinforcement bar (reo), un dinted, got it with replacement bar, not needed - $60 delivered

- R33 rear bar, has been caved in left hand corner , could be repaired and resprayed - $40 delivered

- R33 rear lhs tailight. has a chip out of the indicator, far left hand side, otherwise fine, comes with globes - $30 delivered

- R33 GTST 5spd gearbox, has blown 3rd gear, otherwise fine. would suit rebuild - $500 ono

- RB25DET crossover pipe (between plenum and intercooler) $40 delivered

PM me, or post here for interest

Link to comment
https://www.sau.com.au/forums/topic/311334-fs-random-bits/
Share on other sites
G0DZLR Mentor

G0DZLR

Posted
  • Author
Posted
blown 3rd gear as in all the teeth off and thru the box?

was going to rebuild it but ended up putting another box in it because itd take less time. you cant select 3rd gear , its just like the cars in neutral. but any other gear is fine, not sure whats happend as i havnt pulled it apart but yeah.

Link to comment
https://www.sau.com.au/forums/topic/311334-fs-random-bits/#findComment-5125543
Share on other sites
G0DZLR Mentor

G0DZLR

Posted
  • Author
Posted

okay, turns out when i bought the car the dealership stooged me. said they put a turbo box in but they didnt. so iv got a non-turbo RB25 box, thrid gear fell out of the sump plug when i pulled it out. would definitely suit a rebuild with a new gearset id say, OS Giken or something similar comes to mind. if you want it RSpec its yours. otherwise still up for grabs

Link to comment
https://www.sau.com.au/forums/topic/311334-fs-random-bits/#findComment-5136380
Share on other sites
  • 2 weeks later...
  • 2 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R33 GTST Axles

      By GTSBoy · Posted

      There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • jdniss
      Forced Performance Hta Turbos

      By jdniss · Posted

      Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • thozza
      Intro/R33 owner

      By thozza · Posted

      Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Lithium
      Forced Performance Hta Turbos

      By Lithium · Posted

      Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
    • tidi0x
      R33 GTST Axles

      By tidi0x · Posted

      The axels in my R33 seem tired, and have a bit of play in them. I cannot find any new of course, not interested in buying used, but I am looking to see if anyone can identify some cross compatible axles. In the states I have seen suggested for S chassis the J30 axles, however for the skyline (as best I can tell) the lengths are about an inch off (2.5cm) on both sides. R33 my measure L 22" R 24.5" GPT L 22.5" 24.25" J30 L 23.5" 25.5"  so shaft length is probably an inch wider. Not sure if someone has another still remanufactured option besides the J30. I figured worst case I can buy a pair tear them down and swap the center shaft. My other option was reaching out to GSP to see if they cannot piece together a set, since the axle stubs are still manufactured, I wouldn't think it be that hard to find a shaft or make a shaft work. 
×
×
  • Create New...