Jump to content
SAU Community

Fs: Used Exedy Nc10t Pressure Plate For Push Gt-r Or Gts-t // Machined (matte) Rb25det Flywheel // R33 Gts-t Or R32 Gt-r Push Slave Cylinder


Recommended Posts

Hi Guys!

Recently replaced my clutch kit so these parts are for sale!

Item: R33 1998 GTS-t Slave Cylinder

Condition: Good Condition, No Leaks, No Cracks on Leather Boot, 101k kms

Price: $40

Item: Exedy (NC10T) Pressure Plate from R32 GT-R Push Type Sports Ceramic Clutch (Silver One/Made in Japan/Not that Pink Shet :blink: )

Condition: Used, some very slight heat stress marks, came off my GTS-t.

  • Suits NSK-7121SO or NSK-7121SC
  • Pressure Plate Clamp Rating: 10,800N/1,101kgf,2,482lbf
  • Casting Type: Ductile (Anti-Burst) Cast Iron
  • Great for rebuilds!
  • Send it to Jim Berry

Price: $100

Item: R33 1998 GTS-t Stock Fly Wheel

Condition: Will Supply Machined with matte finish as recommended by Exedy

Price: $100 (Machined) $50 (As-Is, still very flat with no scores)

PICK-UP ONLY (Except Slave, will post for $8.95)

Location: Liverpool, NSW

Contacts: PM or Here!

Cheers,

Johnny

Clutch Slave SOLD

Available:

Exedy Pressure Plate

RB25DET Flywheel

RB25DET Pivot Point, will fit R32 GT-R Pre 1993

  • 2 weeks later...

Still for Sale! - Take the Lot for $120

** Exedy NC-10T Pressure Plate

** Factory Pivot

** Factory Flywheel un-machined

  • 4 weeks later...
  • 2 weeks later...
  • 3 weeks later...

TAKE THE LOT REMAINING FOR $100

** Fly wheel

** NC10T Pressure Plate

** Stock Pivot

  • 2 weeks later...
TAKE THE LOT REMAINING FOR $100

** Fly wheel

** NC10T Pressure Plate

** Stock Pivot

Is it still for sale ?

Could you put pics about pressure plate ? Can i fit it on my r32 gtr 1991 ?

regards

Is it still for sale ?

Could you put pics about pressure plate ? Can i fit it on my r32 gtr 1991 ?

regards

Hi there,

I will take photos of it on the weekend... Provided your R32 GT-R uses a 'Push-Type' clutch setup, then yes. I believe all R32 GT-R Pre March 1993 uses Push. Please check.

Hi there,

I will take photos of it on the weekend... Provided your R32 GT-R uses a 'Push-Type' clutch setup, then yes. I believe all R32 GT-R Pre March 1993 uses Push. Please check.

yes it's push type.... is it in good condition ? could i make paypal transfer ? could you send me it ?

  • 1 month later...
  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...