Jump to content
SAU Community

Recommended Posts

hey everyone!

r32 gtr stuff: (all the stuff working fine otherwise i wouldnt bother selling them.)

attesa actuator (back of gearbox thingy) $80:

biroua.jpg

2x Air flow meters $150:

dheu84.jpg

20tndoo.jpg

air box no filter $150:

2061l3c.jpg

crank angle sensor $150:

220nc7.jpg

2gyaazp.jpg

coil pack harness (a bit stiff, but still working fine)$20:

2426b61.jpg

coil packs (miss 2 rubbers) $40:

jpeusp.jpg

strut bar ( by ibs)$100:

34odi06.jpg

2lk4q9t.jpg

exhaust manifolds with heat shields $150:

23upoab.jpg

genuine nissan N1 speedo 98k on it $220. (no longer avaible from nissan)(its got a couple of scatches on it, only seen at night and can be fixed with touch up paint).

bdtaw0.jpg

fd7q02.jpg

genuine nissan oil pressure and water:

r6zhv7.jpg

alternator 80amp $120: (been reco'd before)

crq84.jpg

water feed lines $15:

148oxno.jpg

just jap oil relocator $50:( doesnt not leak with you use thread sealant)

120ksww.jpg

9x oil filters for just jap relocator adaptors $5ea or all for $40:

dgnz1x.jpg

call/sms/pm any questions or deals on 0422772841

thanks danny

Hey Buddy, interested in taking those filters off your hands. Where about in Sydney are you - or how much with post to Turramurra, 2074?

Just need to check mine tonight to make sure they are the correct number.

Thanks.

  • 2 weeks later...
  • 3 weeks later...
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
×
×
  • Create New...