Jump to content
SAU Community

Parting Out A Complete R33 Gtst Series 1 - Lots Of Aftermarket Bits


Recommended Posts

Parting out a complete series 1 R33 GTST

If a part you are after isn't listed, just ask.

Parts are located in Ipswich, QLD

Postage not included - buyer to arrange own post for large items

PM, Post or text 0414 249 292 (only call after 6pm)

Engine/Driveline stuff

RB25det - complete engine with all ancilliaries - $1250 (has HKS cam gear, polished CAS and polished cam covers)

Garrett GT3076R BRAND NEW - .6 surge ported comp cover, .86 exh housing, external gate - $1600

Garrett GT3582R exhaust housing, .82 - $250

Jun "style" inlet manifold, still over $800 new on ebay - $600

BMI 86mm billet throttle body - $250

Deatschwerks 740cc injectors (straight fit in factory rail) - $450

SARD FPR, with gauge and adaptor for factory rail - $150

Walbro 255 l/hr intank fuel pump, BOSCH 044 external and 500ml surge tank, with all fuel hose required for fitment - $300

Performance-wise Oil cooler and filter relocation kit - $200

MSpec aluminium radiator, pretty sure it's 45mm - $200

KTS Intercooler, 600x300x100, 3" in and out - $200

FMIC, 600x300x70,3" in and out, BRAND NEW - $150

Tial 38mm wastegate, slight grinding marks from fitment, perfect working order - $250

Highmount steampipe manifold with merge collector (similar to 6boost), T3 flange and WG flange for Tial gate, will need WG pipe modded to fit a 25, straight fit for 25/30, HPC coated - $350

Excedy twin plate clutch, plenty of meat left - $1000

Lightweight chromoly flywheel, good condition - $250

RB25det gearbox - was perfect previously was a bit clunky going into gear after i dragged it through the tunnel with the shifter in (only driven for 200 metres since), hence price - $1000

5Zigen 3" cat-back exhaust with oval muffler, quiet and was flowig 450rwhp - $250

Splitfire coil packs, perfect working order - $350

JJR GTR polished alloy washer bottle replacement with oil catch can, has been separated but can be re-welded - $100

Turbosmart Type 2 plumb-back BOV - $150

R33 non ABS diff, shimmed a few years ago, still nice and tight - $100

Suspension/Brakes

Sydneykid whiteline/Bilstien springs and shocks, circlip adjustable, 5000km use - $1000

Whiteline fixed front and rear swaybars, not sure of size but the biggest fixed ones they make - $350

Adjstable Rear upper camber arms - $100

HICAS lock bar - $50

Front adjustable castor arms - $100

Front strut bar, polished - $100

Rear strut bar, factory - $100

Front brakes, with RDA slotted rotors and Ferodo DS2500 pads, hardly any pad wear - $300

Rear brakes, stock - $150

Starcorp Impul rims, white, deep dish rear, 18x8.5 F, 18x9.5 R, some gutter rash, ss595 rears with 75%, Nexen fronts need replacing - $1000

Electronics

Haltech E11v2 with R33 patch loom and 3 bar MAP sensor - $1000

Blitz dual SBC EBC, the older black one, dual solenoid good working order - $250

NISMO clear side winkers - $50

Auto gauge 2 1/4" inch stepper motor gauges, smoked, with all senders - Oil Temp, Oil Pressure, Boost - $60 each or $150 for all three

Pioneer CD/MP3 headunit, basic model, black, removable face - $50

Jaycar response 4ch amp - $100

Fusion 12" sub in box- $50

Body & Interior

Garage Defend carbon fibre air guide, perfect fit for GTST, good condition - $400

NISMO GT shift knob, excellent condition - $50

Series 2 steering wheel, very good condition - $150

Series 1 headlights, sedan model with silver inserts, excellent condition - $300

Rear lights, black - $50

Series 2 rear wing, black, with boot - $100

Type M front bar, black, stone chips so needs paint, meshed with high quality case mesh - $250

Type M side skirts, good condition - $150

400R side skirts, 1 has a slight crack otherwise a really well made set of skirts, gunmetal - $150

Type M rear pods, black, good condition - $80

Series 1 dash surround, very good condition, has been stripped and repainted - $100

Centre console with gear surround and ashtray, good condition, gear surround stripped and repainted - $100

Drivers side window switch panel - $100

Series 2 seats, front and rear, drivers side has tear in bolster - $50

Interior carpet and boot trim - $60

Seatbelt stay, the swinging thing that holds the seatbelt off your neck - $40

More to come as I think of it

Reasonable offers considered but lowballers will be ignored

Pics to follow

pics on thease parts plz

Walbro 255 l/hr intank fuel pump, BOSCH 044 external and 500ml surge tank, with all fuel hose required for fitment - $300

Tial 38mm wastegate, slight grinding marks from fitment, perfect working order - $250

thanks

pics on thease parts plz

Walbro 255 l/hr intank fuel pump, BOSCH 044 external and 500ml surge tank, with all fuel hose required for fitment - $300

Tial 38mm wastegate, slight grinding marks from fitment, perfect working order - $250

thanks

Will try to get pics over the next week

hey mate do you have the drivers side coin cup thingy that goes in the plastic part of the arm rest?

Yes, but it's cracked at the bottom where it screws in

  • 2 weeks later...

hey you big lazy bastard, lol.

I'll take the Flywheel and Oil cooler kit.

Conditions: I need the specs on the flywheel, and pictures please. Will pay cash, and arrange pickup.

hey you big lazy bastard, lol.

I'll take the Flywheel and Oil cooler kit.

Conditions: I need the specs on the flywheel, and pictures please. Will pay cash, and arrange pickup.

Oil cooler kit is sold

Ill get details on the flywheel next week when I get it off the car

mate do you have the interior for the boot, it is a sedan isnt it

It's a coupe, yes i have the boot lining

how much would u do turbo manifold gate and dump for? keenskies :P

the manifold and gate are spoken for at the moment

Turbo price is firm

Extremely Lazy Bastard, I'd also like to take the injectors.

Thanks.

Gone sorry.

I'll do a quick edit of whats still available

Parting out a complete series 1 R33 GTST

If a part you are after isn't listed, just ask.

Parts are located in Ipswich, QLD

Postage not included - buyer to arrange own post for large items

PM, Post or text 0414 249 292 (only call after 6pm)

Engine/Driveline stuff

RB25det - complete engine with all ancilliaries - $1250 (has HKS cam gear, polished CAS and polished cam covers)

Garrett GT3076R BRAND NEW - .6 surge ported comp cover, .86 exh housing, external gate - $1600

Garrett GT3582R exhaust housing, .82 - $250

Jun "style" inlet manifold, still over $800 new on ebay - $600

BMI 86mm billet throttle body - $250

Deatschwerks 740cc injectors (straight fit in factory rail) - SOLD

SARD FPR, with gauge and adaptor for factory rail - SOLD

Walbro 255 l/hr intank fuel pump, BOSCH 044 external and 500ml surge tank, with all fuel hose required for fitment - SOLD

Performance-wise Oil cooler and filter relocation kit - SOLD

MSpec aluminium radiator, pretty sure it's 45mm - $200

KTS Intercooler, 600x300x100, 3" in and out - $200

FMIC, 600x300x70,3" in and out, BRAND NEW - $150

Tial 38mm wastegate, slight grinding marks from fitment, perfect working order - $250 ON HOLD

Highmount steampipe manifold with merge collector (similar to 6boost), T3 flange and WG flange for Tial gate, will need WG pipe modded to fit a 25, straight fit for 25/30, HPC coated - $350 - ON HOLD

Excedy twin plate clutch, plenty of meat left - $1000

Lightweight chromoly flywheel, good condition - $250

RB25det gearbox - was perfect previously was a bit clunky going into gear after i dragged it through the tunnel with the shifter in (only driven for 200 metres since), hence price - $1000

5Zigen 3" cat-back exhaust with oval muffler, quiet and was flowig 450rwhp - $250

Splitfire coil packs, perfect working order - SOLD

JJR GTR polished alloy washer bottle replacement with oil catch can, has been separated but can be re-welded - SOLD

Turbosmart Type 2 plumb-back BOV - $150 - ON HOLD

R33 non ABS diff, shimmed a few years ago, still nice and tight - $100

Suspension/Brakes

Sydneykid whiteline/Bilstien springs and shocks, circlip adjustable, 5000km use - $1000

Whiteline fixed front and rear swaybars, not sure of size but the biggest fixed ones they make - $350

Adjstable Rear upper camber arms - $100 - ON HOLD

HICAS lock bar - $50 - ON HOLD

Front adjustable castor arms - $100

Front strut bar, polished - $100

Rear strut bar, factory - SOLD

Front brakes, with RDA slotted rotors and Ferodo DS2500 pads, hardly any pad wear - $300 - ON HOLD

Rear brakes, stock - $150

Starcorp Impul rims, white, deep dish rear, 18x8.5 F, 18x9.5 R, some gutter rash, ss595 rears with 75%, Nexen fronts need replacing - $1000

Electronics

Haltech E11v2 with R33 patch loom and 3 bar MAP sensor - $1000

Blitz dual SBC EBC, the older black one, dual solenoid good working order - $250

NISMO clear side winkers - $50

Auto gauge 2 1/4" inch stepper motor gauges, smoked, with all senders - Oil Temp, Oil Pressure, Boost - $60 each or $150 for all three

Pioneer CD/MP3 headunit, basic model, black, removable face - $50

Jaycar response 4ch amp - $100

Fusion 12" sub in box- $50

Body & Interior

Garage Defend carbon fibre air guide, perfect fit for GTST, good condition - $400

NISMO GT shift knob, excellent condition - SOLD

Series 2 steering wheel, very good condition - $150

Series 1 headlights, sedan model with silver inserts, excellent condition - $300

Rear lights, black - $50

Series 2 rear wing, black, with boot - $100

Type M front bar, black, stone chips so needs paint, meshed with high quality case mesh - SOLD

Type M side skirts, good condition - $150

400R side skirts, 1 has a slight crack otherwise a really well made set of skirts, gunmetal - $150

Type M rear pods, black, good condition - $80

Series 1 dash surround, very good condition, has been stripped and repainted - $100

Centre console with gear surround and ashtray, good condition, gear surround stripped and repainted - $100

Drivers side window switch panel - $100

Series 2 seats, front and rear, drivers side has tear in bolster - $50

Interior carpet and boot trim - $60 - ON HOLD

Seatbelt stay, the swinging thing that holds the seatbelt off your neck - $40

More to come as I think of it

Reasonable offers considered but lowballers will be ignored

Pics to follow

Gone sorry.

I'll do a quick edit of whats still available

blah, you lazy bastard

haha

Thanks for letting me know

How soon can you get me the specs on the flywheel? Keen to grab asap if the right specs. Can you remember where you got it from, or the model etc?

blah, you lazy bastard

haha

Thanks for letting me know

How soon can you get me the specs on the flywheel? Keen to grab asap if the right specs. Can you remember where you got it from, or the model etc?

It came with the twin plate, both of which I bought second hand, so I have no details on it at all

It should be off by next wednesday so I'll weigh it and get some pics for you



  • Similar Content

  • Latest Posts

    • Hi from Canada, Both of my calipers are starting to fail. My car is a 2005 M35 Stagea ARX and I can't seem to find any parts or any cross reference caliper that would fit my car. Is there a company or a similar caliper that would fit and I could replace the OEM one. Or if anyone knows where I can find a new OEM. Any help is very appreciated. Let me know!
    • Maf is a question mark but TPS  I have set at 0.47, the fact that I’m getting proper voltage range out of it with the key on leads me to believe it’s functioning properly. I’m getting proper voltages on basically everything. I still need to look up voltage ranges for z32 maf and test that 
    • Honestly no not at all, but it’s a very basic tune, it’s stock injectors q45 tps and z32 maf. Other than that it’s a completely stock base map. The file is from nistune and from my understanding if it was tune related I would be able to unplug maf and tps and it would still start even if it was a really shitty start. I have tried starting it with coolant temp, maf, and tps unplugged none of those 3 togethor or individually changes anything 
    • 🏆 Skyline Supremacy Meets Mount Panorama Magic 🏆 Join SAU NSW as we take the long way to Bathurst, the home of GTR greatness. Saturday 30th August 2025 7:00AM Meeting Hanna Park North Richmond 7:30AM Departure Cruise Via Bells of Line Road 9:00AM Arrival to Stop 1: Golden Poplars Meadow Flat 9:45AM Arrival to Final Destination: Mount Panorama Motor Racing Circuit Meet Location: Hanna Park North Richmond Stop 1: Golden Poplars Meadow Flat Final Destination: Mount Panorama Motor Racing Circuit   *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day   Highway gets as low as 10l/100km on my end so I'm not as worried about it being a mechanical issue. More likely just the tune on the haltech.
×
×
  • Create New...