Jump to content
SAU Community

Recommended Posts

New thread as old was clustered and outdated! need these gone

R32 Whiteline strut brace New $80

pic 1

pic 2

Blitz SBC Spec R $280

Bought second hand off ebay to fit onto my skyline, never got around to it now im selling the car. Item is second hand with slight blemishes. There is glue on the case from where it was mounted onto the dash. This should come off with some heat and patience. I never fitted it so don't know how to install or configure please do not ask, but im pretty sure there are intruction manuals on the internet. Comes with all that is displayed in the pictures and should be everything you need.

Freatures:

* The Blitz Dual Solenoid Boost Controller R (Dual SBC Spec R) has four programmable boost settings or various levels of boost.

* This unit features a built-in boost gauge, peak boost display, four different boost settings, boost warning, scramble boost, and a boost limiter safety feature to prevent over-boosting.

* The Dual SBC Spec R uses a dual solenoid design for maximum boost response, capable of handling boost up to 2.5 bar (36 psi).

* The Dual SBC Spec R is 1/4 Din size and is compatible with internal actuators and external waste-gates.

Pic 1

pic 2

pic 3

R32 Rear pods $40

Maroon in colour. Been in storage. One has a large crack as can be seen pics. Few scratches and scuff marks. The price reflects this.

Would suit repair and respray

pic 1

pic 2

pic 3

R32 Greenlabel AFM $30

Used, was working fine when last removed. Has been in storage for past year.

Cannot gurantee it works 100% but again it was working when last used. This is why its going cheap.

pic 1

pic 2

R32 stock rubber intake pipe $30

Pic 1

Brand new Bosch R32/R33 Starter motor $80

pic 1

Pic 2

Pic 3

All items located in NSW Liverpool area and can post all at buyers expense. Want this stuff gone guys its just sitting around! Everything dirt cheap

New thread as old was clustered and outdated! need these gone

R32 Rear pods $40

Maroon in colour. Been in storage. One has a large crack as can be seen pics. Few scratches and scuff marks. The price reflects this.

Would suit repair and respray

pic 1

pic 2

pic 3

R32 Greenlabel AFM $30

Used, was working fine when last removed. Has been in storage for past year.

Cannot gurantee it works 100% but again it was working when last used. This is why its going cheap.

pic 1

pic 2

R32 stock rubber intake pipe $30

Pic 1

I Will take the rear pods AFM and intake pipe if ypu will post to adelaide

Cheers Scott

hey bud im kinnda new to this

im not sure if its better if i can get a contact number and we can discuss

pick up its not sold yet cheers

  • 2 weeks later...
  • 2 weeks later...
  • 3 months later...
Blitz EBC back up for sale due to times wasters. Want a quick sale grab a bargin!

Is the Blitz EBC still for sale?

Im interested?

location in sydney?

Edited by Jamo30

Hi Dave. Did you end up selling the "blitz boost controller"? If not what do you want for it? I`m in Melbourne so i`d want it sent down, so give me a price delivered.

  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hi all, I’ve just finished fitting the timing belt on my RB25, following the standard procedure: rotate the crank twice, release the tensioner, then tighten it down. The belt feels tight, and you can see that clearly in the picture below I’ve heard some people say it’s actually better for the belt to be slightly loose rather than too tight, as excessive tension can lead to snapping. So that’s in the back of my mind. What I’m seeing is this:  • At idle, the belt looks fine.  • But when cranking and especially when revving (around 3–4,000 RPM), there’s a momentary flap/flex or flicker in the belt, which I’ve tried to capture in the video. So my question is — based on what you see, is this slight belt movement something you’d consider normal, or am I just being OCD? Could this amount of movement cause sync issues? Or is it just a harmless bit of flex under load?   from what I know belt flap and flex is expected when crank spins up and pull cam with it Would appreciate any thoughts or similar experiences.     IMG_7656.mov IMG_7657.mov
    • I've replaced the front brakes of my NA to 324 brembos and 350z calipers: i'm going for 225/40-18 up front and 245/35-18 in the back. I have Rays 7.5*19 ET35(225/35) in the front with 5mm spacers otherwise the calipers "lock up/ won't rotate". When i use the calculator i come up with 8*18 ET30 for 225/40...... but not sure i get problems with the calipers. Anyone riding around with 18 inch. that can confirm "that it'll fit"? In the back it's 7.5*9 ET30 (245/30) with the 5mm spacers, but there is no problem with the standard small brakes, so i want to take 8.5*18 ET25 (245/35).
    • Lol.. but then.. always come back to a JDM..
    • Glad to hear. If possible, get your tuner to check air's to make sure everything is still where it should be.
    • The problem with FB/Insta/Reddit etc comments relating to cars is simple. You get to ask a question once, and get one round of replies. For things that can actually be answered in a few lines of text, once, it's fine. After 6 hours, your original question is lost to the void. There are no follow ups, additional questions, anything. No project car is ever such a simple list of questions to ask. You need discussion.
×
×
  • Create New...