Jump to content
SAU Community

Recommended Posts

!!!!PRICES ARE NEGOTIABLE!!!!

Rb25det from r33, all there, still in car, hear running.

It's making way for an rb26 conversion.

may also include alternator depending if my rb26 one has the same plug.

Car has 125,xxx on it, and its not the original engine, so i can only assume the k's are less than that....there is a sticker on the timing cover that says 80,xxxks but its in japanese.

EDIT: took timing cover off, has a PitWork timing belt, so HAS been changed

Compression test shows :

Cyl 1: 155 psi

Cyl 2: 155 psi

Cyl 3: 154 psi

Cyl 4: 159 psi

Cyl 5: 157 psi

Cyl 6: 155 psi

$1900 $1700 or nearest offer.

HKS fmic kit to suit r33 $650. $450

take it with rb rb25 setup, and you can have the lot for $2200$2000

I will not sell the Intercooler kit unless the motor is sold first.

located in dinmore, can deliver to brisbane if you cant organise it...might cost you a carton though.

PM or 0430087070

cheers

Jason

Link to comment
https://www.sau.com.au/forums/topic/314839-rb25det-complete-price-drop/
Share on other sites

  • 2 weeks later...
  • 3 months later...


  • Similar Content

  • Latest Posts

    • Pretty sure it is a common fault. I believe this is the only part you need, but don't quote me as I don't have a V36.  I also believe it is a bit of a pain to change and the device needs to be encoded to the car once it is replaced, so may need someone with the right tools. Buy Genuine Nissan 48700JF00D (48700-JF00D) Lock Set-Steering. Prices, fast shipping, photos, weight - Amayama
    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
×
×
  • Create New...